Power Craft PTS 15/250 Manuale tecnico

1500W 10"

TABLE SAW

AFTER SALES SUPPORT

After Sales Support

Now you have purchased a Power Craft

product you can rest assured in the

knowledge that as well as your 3 year

parts and labour warranty you have

the added peace of mind of dedicated

helplines and web support.

UK / N.IRELAND HELPLINE NO 0151 649 1500

REP. IRELAND HELPLINE NO 1890 946 244

WEB SUPPORT www.einhell.co.uk

MODEL NUMBER: PTS 15/250

User Guide & Warranty

PTS15_250 User Guide AW.qxd 25/4/08 10:03 am Page 2

Helpline No. UK/Northern Ireland 0151 649 1500 Rep. Ireland 1890 946 244

Web Support: WWW.EINHELL.CO.UK

Model Number: PTS 15/250

03 Introduction

04 General Information & Safety Instructions

10 Assembly andParts List

17 GettingStarted

19 Features

20 Instructions

28 Other Useful Information

31 Warranty Card

Contents

PTS15_250 User Guide AW.qxd 25/4/08 10:03 am Page 3

Helpline No. UK/Northern Ireland 0151 649 1500 Rep. Ireland 1890 946 244

Web Support: WWW.EINHELL.CO.UK

Model Number: PTS 15/250

Introduction

Congratulationson choosing to buy a

PowerCraft product.

By doingso you now have the assurance andpeace

of mindthat comes with purchasinga product made

by one of Europe’s leadingmanufacturers.

All products brought to you by PowerCraft are

manufacturedto the highest standards of

performance andsafety, and, as part of our philosophy

for customer service andsatisfaction, are backedby

our comprehensive 3 Year Warranty.

We hope you will enjoy usingyour purchase for many

years to come.

PTS15_250 User Guide AW.qxd 25/4/08 10:03 am Page 4

Helpline No. UK/Northern Ireland 0151 649 1500 Rep. Ireland 1890 946 244

Web Support: WWW.EINHELL.CO.UK

Model Number: PTS 15/250

General Information

& Safety Instructions 2

Important information

Please readthe directions for use carefully andobserve the

information provided. It is important to consult these instructions

in order to acquaint yourself with

the machine, its proper use andsafety precautions.

Safety information

• Warning: When usingelectrictools it is imperative to take the

followingbasicsafety precautions in order to reduce the risk of

electricshock, injury andfire.

• Take due note of all this information before andwhile working

with the saw.

• Do not lose these safety regulations.

• Guardagainst electricshock Avoidbody contact with earthedparts.

• When equipment is not beingusedit shouldbe kept in

a dry, closedplace out of children’s reach.

• Keep mountedattachments sharp andclean to enable you to work

well andsafely.

•Check the power cable regularly andhave it replacedby an

authorizedspecialist at the first sign of any damage.

•Check your extension cables regularly andreplace them if

damaged.

• When workingoutdoors, use only extension cables that are

approvedfor outdoor use andwhich are markedaccordingly.

•Concentrate on what you are doing. Use common sense. Do not

operate the tool if your mindis not on your work.

• Never use an electrictool with a switch that cannot be turnedon

andoff.

Please readthe operating instructions

carefully before assembling andusing

PTS15_250 User Guide AW.qxd 25/4/08 10:03 am Page 5

• Warning! The use of plug-in tools andaccessories other than those

intendedmay put you at risk of injury.

• Always pull the plugout of the power socket before adjustingor

servicingthe machine.

• Give these safety regulations to all persons who work on the machine.

• Do not use this saw to cut fire wood.

• Do not use this saw to cross-cut roundwood.

•Caution! Hands andfingers may be injuredon the rotatingsaw blade.

• The machine is equippedwith a safety circuit breaker (11) to

prevent it startingup again after a voltage drop.

• Before you use the machine for the first time, check that the voltage

markedon the ratingplate is the same as your mains voltage.

• If you needto use an extension cable, make sure its conductor cross-

section is bigenough for the saw’s power consumption. Minimum

cross-section: 1 mm2.

• If you use a cable reel, the complete cable has to be pulledoff the reel.

• Do not carry the tool by its cable.

•Check the power cable. Never use a faulty or damagedpower cable.

• Do not use the cable to pull the plugout of the socket. Protect the

cable from heat, oil andsharp edges.

• Do not leave the saw in the rain andnever use it in damp or wet

conditions.

• Provide goodlighting.

• Do not saw near flammable liquids or gases.

• Wear suitable work clothes! Loose garments or jewelry may become

caught up in the rotatingsaw blade.

• Non-slip shoes are recommendedwhen workingoutdoors.

• Wear a hair net if you have longhair.

• Avoidabnormal workingpostures.

• It is recommendedthat an RCD (Residual Current Device) is fitted

into the mains supply for addedsafety.

• Keep children away from the machine when it is connectedto the

power supply.

Helpline No. UK/Northern Ireland 0151 649 1500 Rep. Ireland 1890 946 244

Web Support: WWW.EINHELL.CO.UK

Model Number: PTS 15/250

PTS15_250 User Guide AW.qxd 25/4/08 10:03 am Page 6

Helpline No. UK/Northern Ireland 0151 649 1500 Rep. Ireland 1890 946 244

Web Support: WWW.EINHELL.CO.UK

Model Number: PTS 15/250

• Keep your workplace clean of woodscrap andany unnecessary

objects.

• An untidy work area invites accidents.

• Do not allow other persons, especially children, to touch the

tool or cable. Keep them out of your work area.

• Persons workingon the machine shouldnot be distracted.

• Note the direction of rotation of the motor andsaw blade. Use

only blades whose permissible maximum speedis not lower than

the maximum spindle speedof the bench-type circular saw and

of the material to be cut.

• After you have switchedoff the motor, never slow down the

saw blade (4) by applyingpressure to its side.

• Fit only blades (4) which are well sharpenedandhave no cracks

or deformations.

• Never use circular saw blades (4) made of high-speedsteel (HSS).

• Use only blades which are recommendedby the manufacturer,

comply with EN 847-1 andcome with a warningnotice. When

changingthe blade, make sure that the cuttingwidth is not

smaller andthe saw plate not bigger than the thickness of

the splitter.

• Faulty saw blades (4) have to be replacedimmediately.

• Never use saw blades which do not comply with the data

specifiedin this manual.

• Never wedge the hingedguardhood(2) in open position.

Use the upper blade guardandset it to the correct position.

• Never dismantle the machine’s safety devices (2, 5) or put them

out of operation.

• If the table insert is worn, replace it.

• Use the splitter correctly andset it to the correct position. The

splitter (5) is an important safety device. Not only does it guide

the workpiece, it also prevents the cut closingbehindthe blade

so that there is no kickback from the workpiece. Note the

thickness of the splitter.

• The guardhood(2) has to be loweredover the workpiece

for each cut.

PTS15_250 User Guide AW.qxd 25/4/08 10:03 am Page 7

Helpline No. UK/Northern Ireland 0151 649 1500 Rep. Ireland 1890 946 244

Web Support: WWW.EINHELL.CO.UK

Model Number: PTS 15/250 07

• Always be sure to use a push stick (3), especially when slitting

narrow workpieces (smaller than 120 mm in width). Keep the

push stick or handle for a push block at the machine at all

times, even when you are not usingthem.

• Never cut workpieces which are too small to holdsecurely in

your hand.

• Important: It is prohibitedto use this saw to make plunge cuts.

• Always standto the side of the saw blade when workingwith

the saw.

• Never loadthe machine so much that it cuts out.

• Always press the workpiece firmly against the saw table (1).

• Make sure that off-cuts do not catch on the saw blade crown.

Risk of catapulting!

• Never remove loose splinters, chips or jammedpieces of wood

when the saw blade is running.

•Torectify faults or remove jammedpieces of wood, always

switch off the machine first. - Pull out the power plug!

• If the sawinggap is worn, replace the table insert (6). - Pull out

the power plug!

•Carry out conversions, adjustments, measurements andcleaning

jobs only when the motor is switchedoff. - Pull out the power

plug!

• Before switchingon, make sure that all keys andwrenches have

been removedfrom the tool.

•Switch off the motor andpull out the power plugbefore you

leave the workplace.

• Refit all guards andsafety devices immediately after you have

completedany repairs or maintenance work.

• Be sure to observe the safety information andoperatingand

maintenance instructions issuedby the manufacturer, as well as

the dimensions listedin the Technical Data.

• It is imperative to observe the accident prevention regulations

in force in your area as well as all other generally recognized

rules of safety.

• Note the information publishedby your professional

associations.

PTS15_250 User Guide AW.qxd 25/4/08 10:03 am Page 8

Helpline No. UK/Northern Ireland 0151 649 1500 Rep. Ireland 1890 946 244

Web Support: WWW.EINHELL.CO.UK

Model Number: PTS 15/250

•Connect up the dust extraction system on all jobs. Circular

saws have to be connectedto a dust collectingdevice when

usedto saw wood. The operator has to be informedabout

the conditions with an influence on dust development, e.g.

the type of material beingprocessed(source andcollection of

the dust), the significance of local separation arrangements,

andthe correct settingof hoods, baffle plates andguides.

• To prevent injuries from flyingdebris from the workpiece,

operate the saw only with a suitable extraction system or a

standardindustrial vacuum cleaner.

• The bench-type saw has to be connectedto a 230 V socket-

outlet with earthingcontact andminimum fusingof 10 A.

• Do not use any low-poweredmachines for heavy duty work.

• Do not mis-use the cable

• Make sure you standsquarely andkeep your balance at all

times.

•Check the tool for damage

•Each time before re-usingthe tool, carefully check that the

guards or any slightly damagedparts are workingas

intended.

•Check that the movingparts are in goodworkingorder, that

they do not jam, andthat no parts are damaged. Make sure

that all parts are fittedcorrectly andthat all other operating

conditions are properly fulfilled.

• Unless otherwise statedin the operatinginstructions,

damagedsafety devices andparts have to be repairedor

replacedby an authorizedservice center.

• Have damagedswitches replacedby a customer service

workshop.

• This electrictool complies with the pertinent safety

regulations. Repairs are to be carriedout only by a qualified

electrician usingoriginal replacement parts or the user may

suffer an accident.

• If necessary, wear suitable personal protection equipment.

This couldconsist of: - Ear-defenders to prevent the risk of

damagingyour hearing- A breathingmask to prevent the

risk of inhalinghazardous dust - Eye protection to prevent

the risk of damagingyour eyes.

PTS15_250 User Guide AW.qxd 25/4/08 10:03 am Page 9

Helpline No. UK/Northern Ireland 0151 649 1500 Rep. Ireland 1890 946 244

Web Support: WWW.EINHELL.CO.UK

Model Number: PTS 15/250 09

• Always wear gloves when handlingsaw blades andrough

materials. Whenever practicable, saw blades must be carriedin

a container.

• The operator has to be informedabout the conditions with an

influence on noise development (e.g. blades designedto reduce

noise emission, caringfor blades andsaws).

• Faults on the machine or its guards, safety devices andblade

have to be reportedto the person in charge as soon as they are

discovered.

• Use only the transport devices to move the

machine. Never use the guards for handlingandmovingthe

machine.

• While you are movingthe machine it is best to cover the top

part of the blade, e.g. with the guard.

• Do not cut rebates or grooves without fittinga suitable guard,

e.g. a tunnel-type guard, over the saw table.

•Circular saws must not be usedfor slottingjobs (cutting

grooves which endin the workpiece).

• Duringtransportation, the upper part of the saw blade should

be covered; for example, by the guard.

Wear goggles

Wear ear-defenders

Wear a breathing mask

Important: Risk of injury!

Never reach into the

running saw blade.

PTS15_250 User Guide AW.qxd 25/4/08 10:03 am Page 10

Helpline No. UK/Northern Ireland 0151 649 1500 Rep. Ireland 1890 946 244

Web Support: WWW.EINHELL.CO.UK

Model Number: PTS 15/250

Items supplied

•Table saw

•Carbide-tippedsaw blade

• Parallel stop

•Cross stop

• Push stick

•Additional standbars

Assembly & Parts List 3

Important! Pull out the power plug

before carrying out any maintenance,

resetting or assembly work on the

cutting-off machine!

1Saw table

2Saw blade guard

3 Push stick

4Saw blade

5Splitter

6Table insert

7 Parallel stop

8Handwheel

9Adjustingand

10 Base frame

11 ON/OFF switch

12 Eccentriclever

13 Extractor hose

14 Cross stop

15 Screw with wing

16 Extractor adapter

20 Fixingscrew

35 Length extension

36 Width extension

37 Table support

43 Rubber feet

44 Additional standbars

Layout (Fig. 1 to 4)

PTS15_250 User Guide AW.qxd 25/4/08 10:03 am Page 11

Indice

Altri manuali Power Craft Sega

Power Craft

Power Craft 65303 Manuale utente

Power Craft

Power Craft 89488 Manuale utente

Power Craft

Power Craft PRS 600 Manuale utente

Power Craft

Power Craft M1R-BR01-150A-1700 Manuale utente

Power Craft

Power Craft 75044 Manuale utente

Power Craft

Power Craft prs-850 Manuale utente

Power Craft

Power Craft 7000 Manuale utente

Power Craft

Power Craft PFZ-400RN Manuale utente

Power Craft

Power Craft 50355 Manuale utente

Power Craft

Power Craft TS 720/1 Manuale utente

Power Craft

Power Craft ECS 180 Manuale utente

Power Craft

Power Craft 31111 Istruzioni operative

Power Craft

Power Craft 48000 Manuale utente

Power Craft

Power Craft 48450 Manuale utente

Power Craft

Power Craft EMS 210 Manuale utente

Power Craft

Power Craft 33331 Manuale utente

Power Craft

Power Craft 48205 Manuale utente

Power Craft

Power Craft PKZ-210 Manuale utente

Power Craft

Power Craft PMS 210/1 Manuale tecnico

Power Craft

Power Craft PSMS 2100 Manuale tecnico

Power Craft

Power Craft 48455 Manuale utente

Power Craft

Power Craft PRS-600D Manuale utente

Manuali Sega popolari di altre marche

RIDGID

RIDGID BS1400 Manuale utente

ATIKA

ATIKA BWS 400-2 Manuale utente

RGC

RGC FS20 Manuale utente

Makita

Makita M2300 Manuale utente

IMET Spa

IMET Spa BASIC 300 PLUS SHI Manuale utente

IMET Spa

IMET Spa SIRIO 370 AF-E Manuale utente

Optimum

Optimum OPTisaw CS 275 Manuale utente

Makita

Makita BPB180 Manuale utente

Stihl

Stihl MS 462 C-M Manuale utente

AEG

AEG TS 250 K Manuale utente

Meec tools

Meec tools 004665 Manuale utente

Makita

Makita LS1018L Manuale utente

Ryobi

Ryobi RCS1400 Manuale utente

DeWalt

DeWalt DCS391 Manuale utente

Sealey

Sealey SA72 Manuale utente

skilsaw

skilsaw SPT88 Istruzioni per il montaggio

Urrea

Urrea SI810 Dimensioni e guida di installazione

EINHELL

EINHELL BKG 210/1 Manuale utente