Power Innovations MPDU Guida

MPDU™

Main Power Distribution Unit

Cold Start Guide

MNL190

Rev 2.1

Export Classification EAR99

READ THIS MANUAL CAREFULLY

SAVE ALL INSTRUCTIONS

This manual contains important information needed to cold start the MPDUTM safely and efficiently. Please read all

instructions carefully before installing or operating equipment.

Keep this manual handy for easy reference.

ELECTRICAL WARNING

Applying information contained in this manual to any other product, including customized

Q-LS systems with nonstandard specifications, may cause injury.

MPDU™, MPDS™, Q-LS™,Q-LS Uninterruptible Power Quality™, UPQ™, and UPQ-NetAgent9™are trademarks of

Power Innovations International, Inc.

This manual may accompany other instructional addendums about additional customizations to standard MPDS™

systems. Please contact Power Innovations if additional manuals are needed and have not been received.

Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.

Power Innovations International, Inc.; American Fork, UT, USA

Contents

1—General Instructions.......................................................................................................................................................1

1.1—Purpose......................................................................................................................................................................1

1.2—Test Method...............................................................................................................................................................1

1.3—Required Materials.....................................................................................................................................................1

1.4—Required Hardware....................................................................................................................................................1

1.5—Initial Conditions.........................................................................................................................................................1

1.6—Additional Requirements............................................................................................................................................1

1.7—Expected Cold Start Duration ....................................................................................................................................1

Revision 4/12/2023 MNL190-2.1

Power Innovations—MPDU Cold Start Guide 1

1—General Instructions

1.1—Purpose

This procedure documents/demonstrates the cold start procedure to be executed for the Main Power Distribution Unit

(MPDU).

1.2—Test Method

Step-by-step instructions are provided for cold starting each of the trainer’s processors and configurable devices.

1.3—Required Materials

Qty

Description

No additional tools or materials are required.

1.4—Required Hardware

Qty

Description

Power Strip (Sometimes required for older external hardware)

External USB Blu-ray drive (When using a disc instead of a USB flash

drive)

USB keyboard

USB mouse

4-port USB hub

1.5—Initial Conditions

To initialized this process, the MPDU must be powered off.

1.6—Additional Requirements

The MPDU must be properly connected. For details and hardware information, see the MPDU manual.

1.7—Expected Cold Start Duration

Approximately one hour.

Revision 4/12/2023 MNL190-2.1

Power Innovations—MPDU Cold Start Guide 2

STEP

ACTION

EXPECTED RESULTS

Once all cables are properly connected and

the power source is connected to the input

terminals, power up the MPDU.

System is now ready for operation.

Before turning ON any switches or breakers,

re-confirm the following important items:

•All connected loads should be OFF.

•All breakers should be OFF.

•Ensure that there are no packaging

materials, tools, or other foreign

materials inside or on top of the units.

•Replace side panels and gland plate.

Turn ON the Q-LS™system.

Turn on the MPDU system in normal

operating mode (refer to the MPDU User’s

Manual for instructions).

Connect the mouse, keyboard, and either

the Blu-ray reader drive or the provided USB

flash drive to the four (4) port USB hub.

Connect the (4) port USB hub to the “USB

Maintenance”port located on the left side of

the MPDU display.

Revision 4/12/2023 MNL190-2.1

Power Innovations—MPDU Cold Start Guide 3

STEP

ACTION

EXPECTED RESULTS

Power ON the MPDU computer by switching

ON the “PDU Logic Power”switch.

Insert the MPDU Cold Start installation Blu-

ray into the Blu-ray drive. (If provided with a

USB flash drive, skip this step.)

On the keyboard press and hold the F7 key.

Reset the MPDU computer by pressing the

“CPU Reset” button.

10.

Continue to hold the F7 key until the boot

device selection menu comes up.

Select the Blu-ray drive or provided USB

flash drive and press ENTER.

The system will boot into the backup\restore

software (Macrium Reflect).

Revision 4/12/2023 MNL190-2.1

Power Innovations—MPDU Cold Start Guide 4

STEP

ACTION

EXPECTED RESULTS

11.

Click “Browse for an image or backup file to

restore”

12.

Navigate to the Blu-ray disc or USB flash

drive and select the image name

“MPDS_xxxxxx-00-00.mrimg”.

Click “OK”.

Revision 4/12/2023 MNL190-2.1

Power Innovations—MPDU Cold Start Guide 5

STEP

ACTION

EXPECTED RESULTS

13.

Click on “Restore Image”.

If the destination section is empty, click

“Select a disk to restore to…”.

Select the destination disk.

14.

Once a destination is displayed in the

bottom half of the screen click “Next >”

15.

Click “Finish”

16.

If a “Confirm Overwrite” dialog appears:

Place a check in the “All target volume data

will be overwritten. Confirm to proceed.” box

and click “Continue…”

17.

The image restore will commence (it may

take about 30 minutes to finish).

Revision 4/12/2023 MNL190-2.1

Power Innovations—MPDU Cold Start Guide 6

STEP

ACTION

EXPECTED RESULTS

18.

Once the installation is complete, click “OK”.

19.

Click the red start button in the bottom left

corner.

Select “Shutdown”

Click “OK”

20.

Once the touchscreen computer is shut

down, remove the Blu-ray drive or USB flash

drive and reboot the computer by pressing

the “CPU Reset” button. You may have to

press it twice. You will know that it has

successfully performed a reset when you

hear a soft beep.

21.

After booting, you will be prompted with the

screen pictured to the right (it may take

around 30 seconds to start).

Select the type of MPDU system you’re

working with (TSSC, PTT, WTT, VM(P)T,

MOBMS, OFT/WST, UTD).

Press “Allow access” when prompted for

firewall exceptions.

22.

After cold start, the touch screen drivers may

need to be calibrated. To do this, first exit

the MPDS software by following steps 23-

26. Then follow the calibration procedure in

steps 27.

Revision 4/12/2023 MNL190-2.1

Power Innovations—MPDU Cold Start Guide 7

STEP

ACTION

EXPECTED RESULTS

23.

The password is the letter “z”.

24.

Shutdown the MPDU Display by selecting

“Display”on the right side of the Menu

Buttons, then selecting “Shutdown”.

25.

The password is the letter “z”.

Altri manuali per MPDU

Indice

Altri manuali Power Innovations Unità di distribuzione dell'energia

Power Innovations

Power Innovations MPDU Manuale utente

Manuali Unità di distribuzione dell'energia popolari di altre marche

hager

hager SP 015 Manuale utente

Pakedge

Pakedge PowerPak 9 Manuale utente

Pts

Pts 9042 Series Manuale utente

Shure

Shure WA405 Manuale utente

CORNING

CORNING CCH 4U Manuale utente

Panamax

Panamax M4LT-EX Manuale utente

PANCONNECT

PANCONNECT FLAT 3M Manuale utente

Raytheon

Raytheon 138-118 Manuale utente

D&R ELECTRONICS

D&R ELECTRONICS PDU-6SS Manuale utente

Botex

Botex PSA 322-6 DL Manuale utente

GE QuiXtra 4000 Guida rapida

RDL

RDL EZ Series Manuale utente

StarTech.com

StarTech.com RKPW161915 Manuale del sistema

Vertiv

Vertiv Knürr DI-Strip Rack PDU Manuale utente

ABB

ABB PSBS0065 Manuale

Baumuller

Baumuller BFN 3-1-0007-001 Manuale

Eaton

Eaton StructuredWiringSolutions ESWT41600 Manuale

GE GEK-45404F Manuale utente