Power Storage Solutions SCIFP48100 Istruzioni per l’uso
Application Manual
2
Read this manual carefully before starting to install the battery.
Keep these instructions for future reference.
This document contains information that is the property of PWR Storage Solutions LLC., and provides
for the sole purpose of the installation, operation, and maintenance of the products. No part of this
publication is to be used for any other purpose, and it is not to be reproduced, copied, disclosed, transmitted
stored in a retrieval system, or translated into any human or computer language, in any form, by any means
in whole or in part, without prior written consent of the owner of the documents information.
Although every possible effort has been made to ensure the accuracy of this document, PWR Storage
Solutions LLC. assumes no responsibility for errors that may appear herein. The information is subject
to change without notice.
3
Read and follow these instructions!
The following precautions are intended to ensure your safety and prevent property damage. Before
installing this product, be sure to read all safety instructions in this document for proper installation.
Failure to comply with the instructions with this symbol may result in a
serious accident, causing death or a severe injury.
Failure to comply with the instructions with this symbol may result in a
serious accident, causing a severe injury.
Failure to comply with the instructions with this symbol may result in
minor or moderate injury.
Provides information considered important but not hazard-related.
The information relates to property damage.
Indicates valuable tips for optimal installation and operation of the
product.
This product is designed as an integrated system, which must be installed by a qualified person
trained in DC battery installation and familiar with the characteristics and safety requirements of
lithium batteries. Do not use this product if you are unsure if you possess the necessary skills to
complete this system installation..
4
Table of Contents
1. Precautions ................................ ................................ ................................ ................................ . 8
1.1 General Safety Precautions ................................ ................................ ................................ ...... 8
2. Installation Precautions ................................ ................................ ................................ ............... 8
2. Product Introduction ................................ ................................ ................................ .................... 9
2.1. Front Panel Function Introduction ................................ ................................ ............................ 9
2.2 Product Specifications ................................ ................................ ................................ ............ 11
2.3 State Indicator ................................ ................................ ................................ ........................ 11
2.4 Protective Functions ................................ ................................ ................................ ............... 12
3. Unpacking the Battery
................................ ................................ ................................ .................... 13
3.1 Parts List................................ ................................ ................................ ................................ . 13
3.2 Visual Inspection of the Modules ................................ ................................ ............................ 15
4. Battery Installation ................................ ................................ ................................ ........................ 15
4.1 Battery Module Installation ................................ ................................ ................................ ...... 16
5. Cable Connection ................................ ................................ ................................ ......................... 18
5.1 Single Battery Connection ................................ ................................ ................................ .. 18
5.2 Connect Cables of the Multiple Batteries in Parallel ................................ ................................ 21
5.3 Visual Inspection of the Connection ................................ ................................ ........................ 23
6. Activate the Product ................................ ................................ ................................ ..................... 23
6.1 Start the Battery ................................ ................................ ................................ ...................... 23
6.2 Monitoring the Battery ................................ ................................ ................................ ............. 23
6.3 Monitoring Software Function Introduction ................................ ................................ .............. 26
7. Inspection, Cleaning and Maintenance ................................ ................................ ......................... 30
7.1 General Information ................................ ................................ ................................ ................ 30
7.2 Inspection ................................ ................................ ................................ ............................... 31
7.3 Cleaning ................................ ................................ ................................ ................................ . 31
7.4 Maintenance ................................ ................................ ................................ ........................... 31
7.5 Storage ................................ ................................ ................................ ................................ ... 31
8. Troubleshooting ................................ ................................ ................................ ........................... 33
9. Transportation Requirements ................................ ................................ ................................ ....... 34
Table of Contents
5
Figures
Figure 2-1: Front Panel Function Introduction
Figure 4-1: Battery Module Installation
Figure 5-1: Single Battery Connection
Figure 5-2: Removing the Protecting Cover
Figure 5-3: Communication Cable Connections between Battery and Computer
Figure 5-4: Multiple Batteries Connections
Figure 5-5: Communication Cable Connections among Multiple Batteries
Figure 6-1: Communication Port Set
Figure 6-2: Language Set
Figure 6-3: System Monitoring Program
Figure 6-4: Introduction of Monitoring Interface
Figure 6-5: Multipacks Interface
Figure 6-6: Record
Figure 6-8: Data Record Interface
Figure 9-1: Class 9 Miscellaneous Dangerous Goods and UN Identification Label
Tables
Table 2-1: Product Specifications
Table 2-2: State Indicator
Table 2-3: Protective Functions Parameter Setting
Table 3-1: Parts Lists
Table 3-2: Recommended Tools and Instruments
Table 5-1: The Dialing Address Configuration of Each Battery
Table 8-1: Troubleshooting
6
To make sure that you understand the proper procedures for safe operation, this section briefly
describes the purpose, audience, organization, revision history, and acronyms and abbreviations.
Purpose
The purpose of this manual is to provide information for the safe and successful installation of the
product. The instructions in this manual are based general battery installation. Other configurations
are possible and theses instructions can be reduced or expanded to accommodate installation of
those systems.
Target Audience
This installation manual is intended for system administrators and operators who install and
configure the product.
Organizaon
This manual is composed of the following chapters:
Ÿ
Chapter 1, “Precautions,” list the considerations.
Ÿ
Chapter 2, “Product Introduction,” explains the function of the product.
Ÿ
Chapter 3, “Unpack the Battery,” explains how to unpack the battery.
Ÿ
Chapter 4, “Battery Installation,” explains how to install the product.
Ÿ
Chapter 5, “Battery System Connection,” explains how to connect the product.
Ÿ
Chapter 6, “Activate the Product,” explains how to activate and monitor the battery.
Ÿ
Chapter 7, “Inspection, Cleaning and Maintenance,” explains how to carry out the maintenance
and store the battery.
Ÿ
Chapter 8, “Troubleshooting,” explains some troubleshooting when some fault phenomenon
occur.
Ÿ
Chapter 9, “Transportation Requirements,” explains transportation requirements.
About this Manual
7
Revision History
Rev. Description Author Date
0.1 First Release
Acronyms and Abbreviaons
The following acronyms and abbreviations are used in this manual
Abbreviations Full Name
BMS Battery Management System
SOC State Of Charge
SOH State Of Health
PWR Storage Solutions 02/12/2021
8
1. Precauons
1.1 General Safety Precauons
The product provides a safe source of electrical energy when operated as intended and as designed.
Potentially hazardous circumstances such as excessive heat or electrolyte mist may occur under
improper operating conditions, damage, misuse and/or abuse. The following safety precautions and
the warning messages described in this part must be observed.
If any of the following precautions are not fully understood, or if you have any questions, contact us
for guidance.
Risks of explosion
Ÿ
Do not subject the battery to strong impacts.
Ÿ
Do not crush or puncture the battery.
Ÿ
Do not dispose of the battery in a fire.
Risks of fire
Ÿ
Do not expose the battery to temperatures in excess of 60℃.
Ÿ
Do not place the battery near a heat source such as an open fire.
Ÿ
Do not expose the battery to direct sunlight.
Ÿ
Do not allow the battery connectors to touch conductive objects such as wires.
Risks of electric shock
Ÿ
Do not disassemble the battery.
Ÿ
Do not touch the battery with wet hands.
Ÿ
Do not expose the battery to moisture or liquids.
Ÿ
Keep the battery away from children and animals.
Risks of damage to the battery
Ÿ
Do not allow the battery to come into contact with liquids.
Ÿ
Do not subject the battery to high pressures.
2. Installaon Precauons
Please be aware that a battery presents a risk of electrical shock and burns including high short-
circuit current. Follow all safety precautions while operating the batteries.
Ÿ
Remove watches, rings, and other metallic accessories.
Ÿ
Use insulated tools to avoid inadvertent short circuits.
Precautions
9
Ÿ
Wear rubber gloves and safety shoes / boots.
Ÿ
Do not put tools or any metal parts on the top of the batteries.
Ÿ
Disconnect charging source and load before connecting or disconnecting terminals.
Ÿ
When moving batteries wear appropriate PPE clothing and equipment.
Ÿ
Do not open or mutilate the batteries.
§ Verify polarity at all connections before energizing the system. Reverse
polarity at the battery terminals will void the Warranty and destroy the
batteries. Do not short circuit the batteries.
§ Do not combine PWRSS Lithium Batteries with other brands or
chemistries; Do not mix Lithium Batteries from different installations,
clients, or job sites.
§ Do not disassemble or modify the battery. If the battery housing is
damaged, do not touch exposed contents.
2. Product Introducon
48 V series lithium iron phosphate battery system has been designed to provide power backup
remote or outside telecom plants like Remote Terminals, Cell
sites, Small CDO applications
This battery has the characteristics of easy system integration, high reliability,
and a wide operating temperature range.
2.1. Front Panel Funcon Introducon
In order to operate the product correctly, please review the function of the front panel of the
battery.
Precautions
This
for
long service life
10
Figure 2-2: Front Panel Function Introduction
1. Reset: When the BMS is in the dormant state, press the button for 1S to activate the BMS.
Meanwhile, the LED indicator will be lit to show SOC of the battery. When the BMS is in the active
state, press the button for 3S to cause battery go into sleep mode. Then the “RUN” LED indicator
light for 0.5 seconds.
2. ADD: DIP switch, used for setting the product communication address when communication
cascade;
3. SOC: These 4 LEDs are used to display the pack SOC. The lighting of these LEDs indicates the
SOC of 25%, 50%, 75%, and 100%. For example, when SOC >75%, all 4 LEDS will light up. If
SOC> 50% and <75%, 3 LEDs will light up. Etc.
4. ALM: Warning light.
5. RUN: Indicates the alarm or the run status of the battery.
6. RS485: Communication interface: Used for RS485 communication.
7. RS232: Connect with upper computer for battery system debugging and software upgrade.
8. Handle: Used to carry/move the battery.
9. Used for mounting within cabinet or relay rack.
10. Positive output terminal.
11. Negative output terminal.
Note: The front panel will vary somewhat depending on battery specifications and performance. For
example, some battery positive and negative output terminals are grouped on a single terminal block.
.
Product Introduction
1
2
34567 8 9
10 11
See multiple battery connection later in manual for settings of dip switch.
Indice
Altri manuali Power Storage Solutions Accessori per fotocamere
