Power PW-70-3 Manuale utente
High-Speed Hand Dryer
Instruction Manual
Thank you for your purchasing. Please read all of the instructions thoroughly before
attempting the installation and operation.
This manual should be kept for future reference.
Safety Cautions
Spare Parts
Dimension Drawing
Functional Introduction
How to use
Maintenance
Troubleshooting
Specifications
1
2
2
4
9～1 0
1 1～1 2
1 3
6～8
Introduction How to use Maintenance Troubleshooting
Installation
procedures:
Installation procedures
3
Electrical wiring diagram 5
Safety Cautions
Symbols and meanings
WARNING
CAUTION
May result in death or serious injury.
May result injury or property damage.
The following symbols are used to indicate improtant safety instructions for the
use of the product.
Symbol Definition
This symbol indicates a prohibited use of the product.
This symbol is used to in dicate a required in the use of this product.
WARNING
Always use specified power supply. Otherwise, a fire could result.
Do not damage the power line. Continued use of a unit with a damaged line could cause fire,
electric shock, or product problems.
Never disassemble, repair or modify the product. Doing so could cause fire or electric shock.
Do not stub out cigarettes on this product. Doing so could result in burns on the surface or cause a fire.
Do not cover Air nozzles with hand or insert any object into Air nozzles. Doing so could result in burns
or other product problems.
Before cleaning, turn off the power switch. Failure to do so could result in sudden activation of the
unit or electrical shock.
CAUTION
REQUESTS
Use water-resistant material for nearby walls or floor as small water drops may spread about if a user moves hands
violently when drying hands.
Do not squirt water on the main dryer unit when cleaning it. Doing so could result in electrical shock or
other product problems.
Do not hang on, tread on, or lean on the product. Otherwise, there are risk of falling.
While cleaning, pay attention to potential user; secure enough ventilation, and prohibit anyone from
using the product. Users may become sick or suffer from abnormal bodily reactions depending on
the soap or chemicals used for cleaning.
Do not insert rubbish or foreign objects into Drying compartment. Doing so could cause malfunction.
These precautions are important for safe usage. Be sure to use the product correctly by following these
precautions.
1
Spare parts
Adjusting switch
Sensor
Indicator light
Vent
LED light
HEPA filter
FULL line
Water level indicator lamp
Dimension Drawing
2
295
265
530
160
180
260
190
No-spill water channel HEPA Filter Drain tank Power cord
Functional Introduction Dimension Drawing
（mm）
Mode
Power off
Power on
High speed
Low speed
Heater off
Heater on
3
Switch
Functional Introduction
Repeat
How to use
CAUTION
Anti-damage timer
Move hands side to side if dryer does not activate.
Small water drops may spread around if user moves
hands violently when drying hands.
The hand dryer stops automatically after approxinmaterly
30 second of continuous operation. In order to continue
to use the product, remove hands again.
Ouststretch fingers and insert hands
all the way into the product.
Afert the dryer is activated, slowly
lift hands white water is blown off.
4
Temperature sensor
Power supply
Balanced inductor
Display board
Panel control board
Electrical wiring diagram
Emitter board
Lighting and
receptor board
Microcomputer master control board
PTC heater
Inductor
Magnetic ring
Motor
Check the malfunction light go out blinking
Fault LED Check items Causes and treatment
Power / abnormal
voltage Check the power connection and
confirm the voltage normal.
Tamper-proof timer
Sensor fault, continuous operation,
check whether or not the sensor is
blocked.
Installation diagram
WARNING
Do not install the product in a humid place or the place where water could drip onto, such
as outdoors or a bathroom.
Otherwise, a fire, electric shock or product problems could result.
Do not install the product in an area with corrosive or inflammable gas, dust, or salt.
Otherwise, a fire, electric shock or product problems could result.
Do not use the product with any power supply other than specified. Otherwise,a fire could result.
Do not damage power line. Continued use of a unit with a damaged line could cause fire,
eleceric shock, or product problems.
Electric work must be done by qualified personel following.
Technical Standards of Electric Equipment, Indoor wiring requlations, and the Installion Guide.
Improper wiring could cause fire to ignite.
Install an earth leakage circuit breaker to the power supply.
If the earth leakage circuit breaker is not installde, electric shocks could occur if there is a malfunction
or a short circuit.
Use a power line of the rated capacity and connect it securely. An insecure connection may result in fire.
Install the main dryer unit on a flat and vertical wall strong enough to support it securely.
Otherwise, the main dryer unit may fall and result in injury or damage.
Use water-resistant material for nerady walls and floor as small water drops may spread dbout if a user moves
hands violently when drying hands.
Never disassemble, repair or modify the product. Doing so could cause fire or electric shock.
CAUTION
REQUESTS
5
Space requirement
Leave enough space around the product to allow for use.
Use screws with drawing strength of 1000N or more.
Check parts
Included parts
Power Switch
Power supply
Install a single Earth leakage circuit breaker with a sufficient
current rating and rating and apply the specified power.
Earth leakage
circuit breaker
Power supply
Rated 10 A or more
AC220～240V
20 20
40
To Installaton Contractors
After verifying the trial operation, give the customer
the Instruction Manual and Cleaning Instruction Sheet
and explain how to use the product.
Instruct ion
Manual
Four screws
(mm)
Instruction Manual
Mounting plate
Four tubes
Installation procedures:
6
1 Unpack the product 2 The installation of the base plate
Height of the installation
of the base plate
For Man 900mm
For Woman 870mm
For disabled 800mm
For Children 700mm
3 The location of power line.
500mm
200mm
40mm
认电源线长度
4 The length of the power line 5 Install the machine
7
6 Installation of Anti-theft screw 7 Install filter screen
8 Confirm the switch position
Lighting
9 Test operation
10 Installation drain tank
Lock
8
Maintenance
Clean the product regularly to make sure it is functioning properly.
Use a damp soft cloth to wipe.
1
2
3
4
2
2
1Hand drying area
(once a week)
Front cover
(once a week)
2
Do not squirt water on the main dryer unit when cleaning it.
Doing so could result in electrical shock or other product problems.
Do not install the water tray with cleaning agent residue into the product.
Doing so could cause product problems.
Before cleaning, turn off the power switch.
Failure to do so could result in sudden activation of the product.
Do not use acid or alkali chemicals designde for cleaning toiltes.
Do not use benzine, thinners or cleansers. Do not use nylon sponges or dry cloth.
Warning
9
Indice
Altri manuali Power Asciugatrice
