PowerBase 577177 Manuale utente
53cm Self Propelled Petrol
Rotary Lawn Mower
These instructions contain important information that will help you get the best
from your product, ensuring it is assembled correctly and safely. If you need help
or have damaged or missing parts, call the Customer Helpline on 01904 727 509.
IMPORTANT!
Please read these
instructions fully before
starting assembly.
Instruction
Manual
3000W Electric
Blower and Vacuum 577177
2
Contents
General safety warnings 3
Warning symbols 16
In the box 17
Assembly 19
Operation 22
Maintenance and repair 27
Troubleshooting 29
Technical data 30
Disposal 32
Getting help 32
Warranty 32
3
General Safety Warnings
General power tool safety warnings
WARNING! Read all safety warnings
and instructions.
Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for future
reference.
The term ‘power tool’ in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
• This product is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision
or instruction concerning use of the
appliance by a person responsible for
their safety.
• Only use the product in the manner and
for the functions described in these
instructions.
4
Work area safety
• Keep the work area clean and well lit.
Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the
dust or fumes.
• Keep children and bystanders
away while operating a power tool.
Distractions can cause you to lose
control.
Electrical safety
• Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adaptor plugs with earthed
(grounded) power tools. Unmodified
plugs and matching outlets will reduce
risk of electric shock.
• Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric
shock if your body is earthed or
grounded.
• Do not expose power tools to rain or wet
conditions. Water entering a power tool
will increase the risk of electric shock.
5
• Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase
the risk of electric shock.
• When operating a power tool outdoors,
use an extension cord suitable for
outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric
shock.
• If the supply cord is damaged, it must
be replaced by the manufacturer, its
service agent or similarly qualified
persons in order to avoid a hazard.
• It is recommended that appliances
should be supplied via a residual current
device (RCD) with a tripping current of
not more than 30mA.
Personal safety
• Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of
drugs, alcohol or medication. A moment of
inattention while operating power tools may
result in serious personal injury.
• Use Personal Protective Equipment (PPE).
Always wear eye protection. Protective
equipment, such as a dust mask, non-skid
6
safety shoes, hard hat, or hearing protection
used for appropriate conditions, will reduce
personal injuries.
• Prevent unintentional starting. Ensure
the switch is in the ‘off’ position before
connecting to a power source and/or
battery pack, picking up or carrying the
tool. Carrying power tools with your finger
on the switch or energising power tools that
have the switch on invites accidents.
• Remove any adjusting key or wrench
before turning the power tool on. A wrench
or a key left attached to a rotating part of the
power tool may result in personal injury.
• Do not overreach. Keep proper footing and
balance at all times. This enables better
control of the power tool in unexpected
situations.
• Dress properly. Do not wear loose clothing
or jewellery. Keep your hair, clothing and
gloves away from moving parts. Loose
clothes, jewellery or long hair can be caught
in moving parts.
• If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of a dust collection device can
reduce dust-related hazards.
7
Power tool use and care
• Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at
the rate for which it was designed.
• Do not use the power tool if the switch
does not turn it on and off. Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
• Disconnect the plug from the power source
and/or the battery pack from the power
tool before making any adjustments,
changing accessories, or storing power
tools. Such preventive safety measures
reduce the risk of starting the power tool
accidentally.
• Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
• Maintain power tools. Check for
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tools operation.
If damaged, have the power tool repaired
before use. Many accidents are caused by
poorly maintained power tools.
• Keep cutting tools sharp and clean.
8
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
• Use the power tool, accessories and
tool bits, etc., in accordance with these
instructions, taking into account the
working conditions and the work to be
performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
Training
• Read the instructions carefully. Be familiar
with the controls and the correct use of the
machine.
• Never allow children or people unfamiliar
with these instructions to use the machine.
Local regulations can restrict the age of the
operator.
• Keep in mind that the operator or user
is responsible for accidents or hazards
occurring to other people or their property.
Preparation
• Obtain ear protection and safety glasses.
Wear them at all times while operating the
machine.
• While operating the machine, always wear
substantial footwear and long trousers.
9
Do not operate the machine when barefoot
or wearing open-toed sandals. Avoid
wearing clothing that is loose fitting or that
has hanging cords or ties.
• Do not wear loose clothing or jewellery that
can be drawn into the air inlet. Keep long
hair away from the air inlets.
• Operate the machine in a recommended
position and only on a firm, level surface.
• Do not operate the machine on a paved or
gravel surface where ejected material could
cause injury.
• Before using, always visually inspect
to see that the shredding means,
shredding means bolts and other
fasteners are secure, the housing
is undamaged and that guards and
screens are in place. Replace worn
or damaged components in sets to
preserve balance. Replace damaged or
unreadable labels.
• Before use, check the supply and
extension cord for signs of damage or
aging. If the cord becomes damaged
during use, disconnect the cord from
the supply immediately. DO NOT TOUCH
THE CORD BEFORE DISCONNECTING
THE SUPPLY. Do not use the machine if
the cord is damaged or worn.
10
Operation
• Before starting the machine, make certain
that the feeding chamber is empty.
• Keep your face and body away from the
feed intake opening.
• Do not allow hands or any other part of
the body or clothing inside the feeding
chamber, discharge chute, or near any
moving part.
• Keep proper balance and footing at all
times. Do not overreach. Never stand at a
higher level than the base of the machine
when feeding material into it.
• Always stand clear of the discharge zone
when operating this machine.
• When feeding material into the machine
be extremely careful that pieces of metal,
rocks, bottles, cans or other foreign objects
are not included.
• If the cutting mechanism strikes any
foreign objects or if the machine should
start making any unusual noise or vibration,
immediately shut off the power source
and allow the machine to stop. Disconnect
the machine from the supply and take
the following steps before restarting and
operating the machine:
- inspect for damage;
- replace or repair any damaged parts;
Indice
Altri manuali PowerBase Soffiatore
