Powercom RF2 Manuale utente
LCD
Soft Key
SEND Key
Symbol Key
Power Key
DEL key
Search/Scan/Link Key
PowerCom RF2 Keypad
Quick Reference
Power on keypad: Press Power Key
I. LCD Display
CH: This shows the channel number you are on.
ID: This shows your keypad’s ID number.
Battery: This displays your battery life.
123: Question type. (See 5. a)
1. Check and X: If it displays a check, then you answered
correctly. If it displays an X, then you answered incorrectly.
2. Key: If you see this symbol then that means the base
station requires a login password.
3. Up and down half arrows: The up arrow means that the
keypad is transmitting information to the base station.
The down arrow means the base station is transmitting
information to the keypad.
4. Reception: This shows you how strong your reception to
the base station is.
II. How to access the LCD keypad menu:
1. Press the Link key and DEL key simultaneously to access
the keypad menu. Press the soft key right and left button
to locate the menu item.
2. Press middle soft key to enter, select the setting and press
SEND to save.
3. Press DEL key to return to the main menu.
Note: Do not connect keypad to base when keypad settings
are being changed.
III. Address Mode: Both the base and the keypads
mustbeconguredtothesamemode,astheyare
not interoperable.
Note: Poweroffandthenonkeypadagainafteraddress
modeischangedtoalterthesettings.
01/2013
PAGE 1
www.PowerComARS.com 1-877-DSINFO7 (374-6367) You can pre-arrange a stand by
POWERCOM
®
RF2
WRS7200-DSI and Base WRS970-DSI-H / WRS971-DSI-H
POWERCOM
®
RF2
1. Static Address mode: When keypad is powered on,
the LCD displays Welcome and keypad ID.
a) You have to congure Base ID and Keypad Address for
every keypad BEFORE usage.
b) Please make sure the address mode of your base is
Static too.
c) The keypad channel must match the base channel.
Press Link key to display the Channel and
Keypad address.
d) To vote, simply power on the keypad and vote.
2. Dynamic Address mode: When keypad is powered on,
LCD displays "Searching For Bases…"
a) System will automatically display all available channel
ID, user should select the channel and press SEND key
or middle soft key to connect.
b) Search Base: Press Link Key
then use the left and right soft keys
to nd the base channel ID you want to connect to.
Press Send or middle soft key to connect to the
base station.
I V. Login: When login is enabled, enter the password and
press Send key to login. Keypad LCD will display
"Authorizing" then "Connected" when the correct
password is entered. Keypad LCD will display
"Login Retry:"when the password in wrong.
V. How to vote:
1. To answer the question depend on the question types:
a) Visual clue of question type: On LCD display right to
the battery symbol, if you see it displays a “1” then you
are answering a single digit or single alpha question.
If you see it displays a “123” then you are answering
a multi-digit type question. If this display is not there
then it means that you are answering a soft key type
question.
b) Soft key questions: Use soft keys
c) Cellphonestyletexting:
Cell phone style text entry is available in a multi
character entry mode. The shift key is available in this
mode. The rst key press begins with the letter and
cycles through to the number and then repeats.
d) For Multi-digitquestions including Multi
AlphaNumeric, Range, Free Form and Priority, you must
press Send key to submit your answer. Use *SYM key
to separate multiple selections such as Multi Alpha
Numeric and Priority.
2. Use the Delete key (Del) to delete any characters
input into the display. This Delete Key also acts as a
cancel button for prompts or for exiting menus.
3. When you need to enter more than 12 characters answer,
Enter up to 12 characters then press Enter key. Then enter
a "*SYM" key as a rst character on the Keypad LCD as
prex for the next answer string. All characters following
the initial * will be appended to the previously sent answer
string. Press Send key to submit the second answer string.
You can continue using "*SYM"as prex to append to the
previous answer.
VI. Search/Scan/Link Key
The Search Key, when Pressed, will change the three
digits in the upper left corner of the LCD to display the
current base ID (channel) for 4 seconds. After the
timeout, it will display the keypad address again. If the
keypad is congured as Dynamic Addressed, the key
will prompt the user to search for the base units.
VII.
Multi-sitemeetingbasestationconnection
usingWRS970-DSI-H
1.
connections. Ethernet connection enables multi-site
meeting. USB stick base has only USB
connection, therefore it has no multi-site meeting capacity.
2. You must use Power-over-Ethernet (PoE) power adopter
to provide power source.
3. You must congure an IP address for the base station at
remote site to enable remote site base station connection.
4. See PowerCom RF2 online help.
01/2013
PAGE 2
www.PowerComARS.com 1-877-DSINFO7 (374-6367) You can pre-arrange a stand by
is equipped with both USB and Ethernet
WRS970-DSI-H
WRS970-DSI-H
Questo manuale è adatto per i seguenti modelli
3
Altri manuali Powercom Tastiera
