PowerFile C200 Studio Manuale utente
PN 11687
PowerFile MFX User Guide
2
Users Guide for PowerFile MediaFinder X
PowerFile C200, R200 & R200S
Table of Contents
Table of Contents .............................................................................................................................................. 2
Important Safety Information........................................................................................................................... 3
Introduction ........................................................................................................................................................ 5
Product Overview .............................................................................................................................................. 5
System Requirements....................................................................................................................................... 5
Unpacking the PowerFile.................................................................................................................................. 5
Terms Used in this Guide................................................................................................................................. 7
PowerFile Back Panel ....................................................................................................................................... 8
PowerFile Front Panel (Overview)................................................................................................................... 8
Installing the MediaFinder X Software.......................................................................................................... 10
MediaFinder X Preference Pane Interface.................................................................................................... 10
Entering Activation Codes ............................................................................................................................ 11
Connecting the PowerFile .............................................................................................................................. 12
MediaFinder X Finder Interface ..................................................................................................................... 12
Basic Operations: Loading, Mounting, Unmounting, and Unloading...................................................... 14
Identifying Discs .............................................................................................................................................. 16
Unloading Discs from a PowerFile................................................................................................................ 16
Mounting Discs ................................................................................................................................................ 17
Unmounting Discs from Drives ..................................................................................................................... 17
Formatting/Writing DVD-RAM Discs............................................................................................................. 17
Renaming Media Within the PowerFile Desktop Icon ................................................................................ 18
Disc Maintenance ............................................................................................................................................ 18
Network Access ............................................................................................................................................... 19
Uninstalling the MediaFinder X Software..................................................................................................... 21
DiskTracker for MediaFinder X (Optional) ................................................................................................... 22
Daisy-Chaining Multiple PowerFiles............................................................................................................. 23
Troubleshooting............................................................................................................................................... 24
Frequently Asked Questions (FAQs)........................................................................................................... 25
Contact Us ........................................................................................................................................................ 26
PowerFile Safety Information
PowerFile MFX User Guide
3
Important Safety Information
Operators Safety Summary
The safety information in this summary is for installation and operating personnel. Warnings and
cautions can also be found throughout the manual where they apply.
Power Source
Please refer to the PowerFile Specifications section before powering-on your PowerFile product.
Grounding the PowerFile
This product is grounded through the ground conductor of the power cord. To avoid the possibility
of electrical shock, plug the power cord into a properly wired and grounded receptacle before
operating the PowerFile. A protective ground connection, by way of the ground conductor in the
power cord, is essential for safe operation. A standard 3-pin IEC-type and in good operational
condition is the only acceptable cord that may be used to connect the PowerFile to a power source.
Do Not Use Extension Cords
To avoid safety hazards, use only the power cord (or similar) that was supplied with your unit. We
do not recommend that extension cords be used with this product. As with all electrical devices, do
not run power cords under rugs or carpets or place heavy objects on them. Damaged power cords
should be replaced immediately with cords meeting factory specifications.
Handle the AC Power Cord Gently
When disconnecting the power cord from an AC outlet, always pull the plug, never the cord. If you
do not intend to use the unit for any considerable length of time, disconnect the plug from the AC
outlet.
Removal of the PowerFile Cover or Front Panel
To avoid personal injury and to ensure proper operation, do not remove the PowerFile top cover,
bottom cover or front panel. Removal of the bottom cover will void the warranty. Do not operate this
unit without the covers and panels properly installed.
CAUTION!
The C200, R200 and R200S are Class 1 laser products. The visible laser beam could cause
hazardous radiation exposure if misdirected. Be sure to operate this player in accordance with the
instructions in this manual. Please read this Owners Manual carefully and retain it for future
reference.
To prevent direct exposure to the laser beam, do not open the cabinet enclosure or defeat any of
the safety mechanisms. DO NOT STARE INTO THE LASER BEAM OR PLACE YOUR EYES
CLOSE TO THE OPENING OF THE DISC TRAY OR OTHER OPENINGS TO LOOK INSIDE THE
PLAYER.
Important Information for the User
This equipment has been tested and found to comply with the limits for a Class-A digital device,
pursuant to Part 15 of the FCC Rules, and is for commercial use only. The limits are designed to
provide reasonable protection against harmful interference in a commercial installation. This
equipment can generate and radiate radio-frequency energy, and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communication.
However, there is no guarantee that harmful interference will not occur in a particular installation. If
PowerFile Safety Information
PowerFile MFX User Guide
4
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one of more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet circuit different from which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help
Installation Location
To ensure proper operation, and to avoid the potential for safely hazards, place the unit on a firm
and level surface. If the unit is operated on a tilted or unstable surface, the discs will not sit correctly
in the carousel, and problems with mounting and ejecting discs could occur. When placing the unit
on a shelf, be certain that the shelf and any mounting hardware can support the weight of the
product.
Make certain that proper space for ventilation is provided behind the unit - it is important that you do
not block the rear vents. If this product is to be installed in a cabinet or other enclosed area, make
certain that there is sufficient air movement within the cabinet, otherwise a fan may be required.
Do not place the unit directly on a carpeted surface.
Avoid installation in extremely hot or cold locations, or an area that is exposed to direct sunlight or
heating equipment.
The unit should be operated in a temperature range from 50 to 95° Fahrenheit (10° to 35° C).
Avoid moist or humid locations, as this may damage the optics of the DVD drives.
Cleaning
When the unit gets dirty, wipe it with a clean, soft, dry cloth. NEVER use benzene, aerosol cleaners,
thinner, alcohol, or any other volatile cleaning agent.
Moving or Shipping the Unit
Before moving the unit, be certain to disconnect any FireWire cables and to disconnect the unit
from the power outlet. It is safe to hand carry the unit, but care must be taken to ensure that the unit
remains relatively level (do not tilt the unit more than 30°). If a PowerFile is tilted while discs are in
the unit, the discs may become dislodged from the carousel. Dislodged discs will require the
removal of the top cover, and the unloading and reloading of all the discs in the unit.
Before shipping a PowerFile, it is very important that all discs be ejected prior to shipping.
Be sure that all discs are removed from the drives and the carousel, and ship the unit in the
original packaging.
PowerFile Introduction and Overview
PowerFile MFX User Guide
5
Introduction
Thank you for purchasing the PowerFile DVD/CD with MediaFinder X. The PowerFile is the most
innovative and cost-effective solution for the storage, retrieval, and sharing of data on digital media.
With unparalleled flexibility, a PowerFile is the storage management solution for Desktop
publishing, education, medical, legal, small office/home office, and a broad range of other
environments where digital data storage, archival and retrieval is needed.
Product Overview
The PowerFile holds up to 200 discs and additional Libraries may be daisy-chained to provide
increased disc storage. The MediaFinder X (MFX) software allows you to store, catalog, and
categorize all types of digital media easily, and provides quick access to those files on the host
computer or over a Local Area Network (LAN). With R200 or R200S Libraries, the MFX software
also allows writing to DVD-RAM discs for additional archive flexibility. MFX works seamlessly over
an IEEE 1394 (FireWire, iLINK) connection and Mac OS X or OS X Server.
The PowerFile can be used in a single or multi-user environment. The IEEE 1394 interface
provides data transfer rates of up to 400 megabits per second, and multiple Libraries to be
connected together in a tree configuration for extremely large library applications.
MediaFinder X is a totally new software product, and is the first and only software package to
manage disc libraries within a native Mac OS X environment.
System Requirements
PowerFile MediaFinder X requires the following minimum systems:
Host computer:
• PowerMac, iMac, eMac, or PowerBook G3 or G4 computer capable of running Mac OS X 10.2
(Jaguar) or Mac OS X 10.3 (Panther) with built-in FireWire ports or a FireWire PCI or CardBus card
installed.
•!Mac OS X Client version 10.2.8 or later (for 10.2 users) or 10.3.4 or later (for 10.3 users)
OR
• Mac OS X Server version 10.2.8 or later (for 10.2 users) or 10.3.4 or later (for 10.3 users)
• Approximately 1GB of drive space is recommended, but not required.
Client computers:
Any of:
• Mac OS X (any version)
• Mac OS 9.2
• Microsoft Windows
• UNIX system with NFS client
• Any system with access to an FTP client
Unpacking the PowerFile
Check to see that you have the following items:
PowerFile Introduction and Overview
PowerFile MFX User Guide
6
PowerFile
Power cord
2-meter IEEE 1394 cable
Documentation including:
MediaFinder X User Guide
Software install and documentation CD-ROM
Registration Card
PowerFile Macintosh Users
PowerFile MFX User Guide
7
Terms Used in this Guide
Throughout this guide, several terms are used in reference to the moving of discs into and out of a
PowerFile, and into and out of the internal drives. The following definitions are used to address
those functions:
PowerFile: PowerFile C200, R200 or R200S
Load: Inserting a disc through the front panel and into the carousel of the PowerFile.
Mount: Directing a disc to move from a carousel slot to an available PowerFile drive.
Unmount: Directing a disc to move from a drive back into the carousel.
Unload: Moving a disc from the carousel and through the front panel, removing it from the
PowerFile.
These terms will be used throughout this manual, and will be seen as menu items in the software
interface. On the PowerFile front panel, there is a button labeled Eject, which performs the
"Unload" function of ejecting a disc from the PowerFile.
PowerFile Macintosh Users
PowerFile MFX User Guide
8
PowerFile Back Panel
PowerFile Front Panel (Overview)
The following is an explanation of the buttons and features on the front panel of the
PowerFile.
Load/Unload Slot
This is the front slot where discs are loaded into and unloaded from the PowerFile. Discs must be
loaded with the "data" side on the left, and the "label" side on the right.
Display Window
This two-line LCD readout displays unit status and messages.
Power Button:
Powers the PowerFile on or off.
Control Function Buttons
Many of the PowerFile functions can be accessed by using the following buttons:
Load/
Unload
Slot
Display
Window
Power
Plug the 1394 cable
into any of the 3 ports.
Note: Do not force the
cable in backwards!
PowerFile Macintosh Users
PowerFile MFX User Guide
9
LOAD
Opens the "gate" in the "Load/Unload" slot in the front panel, allowing discs to be loaded into the
PowerFile.
EJECT
Directs the PowerFile to lift a disc out of the unit and place it in the Load/Unload slot for removal.
MODE
Provides Administrative Functions on the PowerFile. Pressing this button scrolls through a series
of functions. These functions will be displayed in the Display Window in the following sequence:
Library by Label A-Z:
This window lists the discs currently in the PowerFile alphabetically. Use the scroll buttons to
scroll through the list. The window will identify which carousel slot the disc is in, and the name of
the disc.
Library by Slot 1-200:
This window lists the discs currently in the PowerFile by carousel slot number. Use the scroll
buttons to scroll through the list. The window will identify which slot in the carousel the disc is in,
and the name of the disc.
Display Drive Info:
Displays the above screen, then after a moments pause, will display which discs are currently
mounted in the drives:
PowerFile Macintosh Users
PowerFile MFX User Guide
10
Installing the MediaFinder X Software
Important!
Install MediaFinder X before connecting the PowerFile(s)!
Each PowerFile requires a separate MFX software activation code. An administrator name and
password is required for installation.
1. Open the MediaFinder X Installation CD icon and then launch the “MediaFinder X.pkg” file.
2. Follow the on-screen instructions and then restart at the prompt.
MediaFinder X Preference Pane Interface
Following installation, a MediaFinder X preference pane will appear in the System Preferences
under the ‘Other’ category.
Below is an example of the MediaFinder X preference pane when opened:
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali PowerFile Lettore CD
