Powerfix Profi ST10A Manuale utente
IAN 78526
MOTION SENSOR
MOTION SENSOR
Operation and Safety Notes
RÖRELSEDETEKTOR
Bruksanvisning och
säkerhetsanvisningar
BEVÆGELSESSENSOR
Brugs- og sikkerhedsanvisninger
BEWEGUNGSMELDER
Bedienungs- und Sicherheitshinweise
Before reading, unfold the page containing the illustrations and
familiarise yourself with all functions of the device.
Vik ut bildsidan och ha den till hands när du läser igenom
anvisningarna och gör dig bekant med apparatens/maskinens
funktioner.
Før du læser, vend siden med billeder frem og bliv bekendt med
alle apparatets funktioner.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus
und machen Sie sich anschließend mit allen Funktionen des
Gerätes vertraut.
GB/IE Operation and Safety Notes Page 5
SE Bruksanvisning och säkerhetsanvisningar Sidan 13
DK Brugs- og sikkerhedsanvisninger Side 23
DE/AT/CH Bedienungs- und Sicherheitshinweise Seite 31
MOTION SENSOR
a
1
b3
2
SENS TIME LUX
D
4
5
6 7 8
PIR
A (RED)
N (BLUE)
L (BROWN)
INPUT∼
L N
NOMINAL
LOAD
OUTPUT∼
A (ROT)
N (BLAU)
L (BRAUN) LAST
EINGANG∼
AUSGANG∼
C3
5GB/IE
Table of contents
Introduction
Intended use......................................................Page 6
Technical Data ..................................................Page 6
Parts description................................................Page 7
Safety...............................................................Page 7
Mounting
Select a suitable place for installation.............Page 8
Installation .........................................................Page 9
Start-up
Setting the detection range ..............................Page 9
Setting the light sensitivity.................................Page 10
Setting the lighting duration of the device.......Page 10
Error Analysis............................................Page 10
Cleaning and Care.................................Page 11
Disposal..........................................................Page 11
Warranty and Service
Service address.................................................Page 12
Manufacturer.....................................................Page 12
6 GB/IE
Introduction/SafetyIntroduction
Motion Sensor
Introduction
Congratulations on the purchase of your new
device. You have selected a high quality prod-
uct. The instructions for use are a part of this
product. They contain important information about safety,
use and disposal. Before using the product please, famil-
iarise yourself with all the operating and safety instruc-
tions. Only use the product as instructed and only for the
specified applications. When passing this product on to
others please be sure to also include all its documentation.
Intended use
The motion detector is intended for the automatic control
of light sources. The product turns on, respectively turns
off sources of light if persons move within the sensor de-
tection area. Other uses or changes to the product consti-
tute improper use and carry serious risks of accidents. The
manufacturer is not liable for any damages due to improper
use. The product is not intended for commercial use.
Technical Data
Type: 10174
Model No.: ST10A
Rated voltage: 220–240V∼ 50 Hz
Nominal load: max. 1200 watt (for light
bulb lighting material)
max. 300 watt (for en-
ergy saving lighting
material)
Protection class: II/
Delay time min.: 10 sec. - +/- 3 sec.
Delay time max.: 7 min. +/- 2 min.
Surrounding light: 3–2000 Lux (can be set)
Range: min. 5 m, max. 12 m
(can be set)
Coverage area: max. 180°
Operating temperature: -20–40°C
Operating humidity: < 93% rF
7GB/IE
Introduction/SafetyIntroduction
Recommended
installation height: 1.8–2.5 m
Parts description
1Sensor
2Scew with screw anchor (ø approx. 6 mm)
3Screw terminal
4Base plate
5Cable opening
6Control dial SENS („Coverage area“)
7Control dial TIME („Time“)
8Control dial LUX („Light sensitivity“)
Safety
Please read all the safety information and instructions.
Failure to observe the safety information and instructions
can result in electric shock, fire and/or serious injury.
The manufacturer is not liable for cases of material dam-
age or personal injury caused by incorrect handling or
non-compliance with the safety instructions. In such
cases, the warantee is voided.
PLEASE KEEP ALL SAFETY INSTRUCTIONS AND
INSTRUCTIONS FOR USE FOR FUTURE REFERENCE!
Avoid the danger of death
from electric shock!
Before installation, check the motion detector, as well
as connection cords to ensure that these are intact. A
defective product and defective cords increase the
risk of electrical shock.
DANGER TO LIFE BY ELECTRIC
SHOCK! Before installation or performing any work
on the lamp, switch off the electrical circuit at the cir-
cuit breaker box or remove the fuse from the fuse box.
Only install the motion detector while wearing dry
clothing and preferably, shoes with rubber soles or
while using an insulation mat.
If not working properly, only allow the sensor 1to
be repaired by an electrician.
8 GB/IE
Mounting/Start-upSafety/Mounting
Never take the product apart under any circum-
stances.
How to avoid personal injury and
damage to the product!
RISK OF FATAL
INJURY AND ACCIDENT HAZARD
FOR INFANTS AND SMALL CHIL-
DREN! Never leave children unattended with the
packaging material or the product. The packaging
material poses a suffocation hazard, and there is a
risk of fatal injury by electric shock. Children often
underestimate dangers. Please keep children away
from the device at all times.
Children or persons who lack the knowledge or ex-
perience to use the device or whose physical, sen-
sory or intellectual capacities are limited, must never
be allowed to use the device without supervision or
instruction by a person responsible for their safety.
Children must be supervised at all times so that they
do not play with the device.
CAUTION! EXPLOSION HAZARD! Do not op-
erate the motion detector in potentially explosive en-
vironments containing flammable vapours, gases or
dusts.
Never exceed the maximum rated supply voltage of
240V∼.
Avoid extreme temperature fluctuations. Use the
product only if the ambient temperatures are accept-
able.
We recommend that installation be performed by a
professional.
Never take the product apart.
Mounting
Select a suitable place for
installation
Ensure that
– the motion detector will not be functionally inhibited at
the desired place of installation due to obstacles or
constantly moving objects.
9GB/IE
Mounting/Start-upSafety/Mounting
– the motion detector is not installed where there are
strong temperature fluctuations, e.g. due to heating
devices or air conditioners.
Installation
DANGER TO LIFE BY ELECTRIC
SHOCK! Before installation, switch off the electrical
circuit at the circuit breaker box or remove the fuse
from the fuse box.
Note: The recommended installation height is be-
tween 1.8 and 2.5 m.
Note: Before installation, ensure an optimal direc-
tion of motion. The motion detector reacts more sensi-
tively to movement from the side than to motion from
the front (see Ill. A). Therefore, we recommend install-
ing the motion detector 1to the side of the direc-
tion of movement.
Note: To attach the base plate 4it is necessary to
drill two holes. We recommend a drill with a 6 mm
diameter.
Remove the screws 2from the cover of the connec-
tion area by screwing them in the direction of
rotation (see Ill. B).
Insert the cable through the cable opening 5of the
base plate 4.
Screw the base plate 4to the desired position.
Connect the cable to the screw terminal 3of the
motion detector as depicted in Ill. C.
Attach the cover of the connection area back to the
base plate 4by screwing the screws 2in the
direction of rotation .
Start-up
Turn the electricity back on. The device is now ready
for use.
Setting the detection range (Ill. D)
Note: the sensor range is max. 12 m (depending on the
surrounding temperature).
10 GB/IE
Error Analysis/Cleaning and Care/DisposalStart-up/Error Analysis
Turn the control knob SENS 6in the direction „-” in
order to reduce the sensor range 1to 5 m.
Turn the control knob SENS 6in the direction „+”
in order to increase the sensor range 1.
Setting the light sensitivity (Ill. D)
Turn the control knob LUX 8in the direction „ “.
The sensor 1is in the night operation mode and
does not react to light values below 3 Lux.
Turn the control knob LUX 8in the direction „ “.
The sensor 1is in the night and day operation mode.
Note: the intermediate range is for various light
values.
Setting the lighting duration
of the device (Ill. D)
Note: the lighting duration of the device can be set from
min. 10 sec. to max 7 min.
Turn the contol knob TIME 7in the direction „-” in
order to decrease the lighting duration of the device.
Turn the control knob TIME 7in the direction „+“ in
order to increase the lighting duration of the device.
Note: The lighting duration is always calculated based on
the respective last movement recorded by the sensor 1.
Error Analysis
Note: The function of the device is dependent on on the
outside temperature. Functional errors may occur due to
strong temperature fluctuations.
Problem Solution
The connected
lighting does
not illuminate.
a) Check to ensure that the elec-
trical cord and the device are
connected correctly.
b) Replace defective lighting
material.
c) Check the setting of the light
sensitivity.
Questo manuale è adatto per i seguenti modelli
1
Indice
Lingue:
Altri manuali Powerfix Profi Accessori
Powerfix Profi
Powerfix Profi 101006 Manuale utente
Powerfix Profi
Powerfix Profi 292045 Manuale utente
Powerfix Profi
Powerfix Profi 289710 Specifiche tecniche
Powerfix Profi
Powerfix Profi 270249 Manuale utente
Powerfix Profi
Powerfix Profi 56731 Manuale utente
Powerfix Profi
Powerfix Profi 279891 Manuale utente
Powerfix Profi
Powerfix Profi 270249 Manuale utente
Powerfix Profi
Powerfix Profi PMT 1.1 A1 Manuale del proprietario
