Powerfix KH 4055 Manuale utente
WHEEL NUT WRENCH KH4055
Powerfix
IB_KH4055_0706_UK.qxd 18.09.2006 14:11 Uhr Seite 1
2
Intended use
The wheel nut wrench KH4055 is intended for
loosening and tightening of wheel nuts / bolts
during a tyre change.
Technical data
Length: 350 mm - 530 mm
Wrench widths: 17 mm and 19 mm
Using the wheel nut wrench
• Park the vehicle on a level surface, put it in
a low gear and set the hand break.
• Also secure the vehicle against rolling with
appropriate equipment.
Important:
Follow the safety / operating instructions in the
operating manual for your vehicle.
• Loosen the wheel nuts / bolts of the wheel to
be changed in an alternating cross pattern before
lifting the vehicle with the jack.
IB_KH4055_0706_UK.qxd 18.09.2006 14:11 Uhr Seite 2
3
• Lift the vehicle until the wheel to be changed is
no longer in contact with the floor.
• Remove the wheel nuts / bolts in an alternating
cross pattern and remove the wheel.
• Put the replacement wheel in position and tightly
screw in the wheel nuts / bolts.
• Lower the vehicle and retighten the wheel nuts
in an alternating cross pattern with the wheel
nut wrench.
Important:
After changing the wheel, check the air pressure
in all tyres.
The wheel nuts / bolts must be inspected again
and retightened after approximately 50 km.
Do not perform any work under the vehicle while
it is lifted up with the jack.
IB_KH4055_0706_UK.qxd 18.09.2006 14:11 Uhr Seite 3
Kompernaß GmbH
Burgstrasse 21
D-44867 Bochum
www.kompernass.com
ID No.: KH4055_0706_V1
UK
IB_KH4055_0706_UK.qxd 18.09.2006 14:11 Uhr Seite 4
Indice
Altri manuali Powerfix Utensili elettrici
Powerfix
Powerfix PAWSO A1 Manuale utente
Powerfix
Powerfix PLPRS A1 Manuale utente
Powerfix
Powerfix PBMP 30 A1 Manuale utente
Powerfix
Powerfix PDS 45 A1 Manuale utente
Powerfix
Powerfix POWERFIX KH4055 Manuale utente
Powerfix
Powerfix Profi 114470 Manuale utente
Powerfix
Powerfix Profi+ 102693 Manuale utente
Powerfix
Powerfix PPR 4 A1 Manuale utente
Powerfix
Powerfix Profi+ PAWSO A1 Manuale utente
