6
The cord cross section should be at least 1.0 mm 2. Unwind the cord completely from the drum before using it. Check the cable for The cord cross section should be at least 1.0 mm 2. Unwind the cord completely from the drum before using it. Check the cable for The cord cross section should be at least 1.0 mm 2. Unwind the cord completely from the drum before using it. Check the cable for
damage.
• Route the cable away from the work area and remember to be behind the person operating the device.
• Use the strain relief provided for this purpose to attach the extension cable.
• Damaged cables, connectors, plugs and non-compliant connecting cables must not be used. If the power cord is damaged or cut,
immediately remove the plug from the socket.
• Do not use the device if the switch cannot be turned on or off. Damaged switches must be replaced at a customer service center.
• Do not overload the device. Work only within the specified power range. Do not use low power machines for heavy work. Use your
device only for its intended purpose.
IN SAFETY INSTRUCTIONS FOR WORKING WITH THE TRIMMERIN SAFETY INSTRUCTIONS FOR WORKING WITH THE TRIMMER
• The device may not be used by children. It is also forbidden to work with this device also for people who have not become fully
acquainted with the instructions for using the device. Laws and local regulations may provide for a minimum age for those who are
allowed to operate such devices.
• Do not allow other people to touch the device or the extension cable. Keep people away from this device, especially children and
pets. Keep a safe distance around you of 15 m. Stop work if someone is nearby.
•Familiarize yourself with your surroundings and watch out for possible dangers that you may not hear under certain circumstances when
working.
•Carefully examine the section to be cut and remove any wires and other foreign matter.
• Wear appropriate work clothing, i.e. strong footwear with non-slip soles, strong long pants, work gloves and safety glasses. Do not
wear voluminous clothing or jewelry as they can get caught in moving parts. Do not use the device if you are barefoot or wear open
sandals.
•Keep a stable posture during work. Avoid abnormal body posture. Always drive the machine with both hands. Be particularly careful when
working on sloping ground. Before switching on, make sure that the device does not come into contact with other objects. Turn off the device
before putting it away.
• Do not perform work on this device if you are tired or distracted or after drinking alcohol or taking pills. Take breaks at the right time.
Get to work with caution.
• Do not use the device during rain, adverse weather conditions, in humid surroundings, or cut wet hedges with it. Work only in good
lighting.
• Do not carry out work with a damaged, incomplete or modified device without the consent of the manufacturer. Never use the device
if its protective equipment is damaged. Check the device's safety status before use, especially the power cord as well as the switch
and the protective cover.
• Use the device only when all handles and protective devices are properly installed.
• Before use, check that the cutting element, trimmer head works properly, does not jam and is not damaged or badly worn. Only
carry out work when the cutting accessories are functional.
D ADDITIONAL TIPS FOR BATTERIES AND CHARGERSD ADDITIONAL TIPS FOR BATTERIES AND CHARGERS
Use only batteries and chargers compatible with you.
BATTERIES
• Never try to open for any reason.
• Do not store in places where the temperature may exceed 40 ° C.
•Charge only at an ambient temperature of 4 ° C to 40 ° C.
• When disposing of batteries, follow the instructions in the section "DISPOSAL OF USED DEVICES".
• Do not cause short circuits. In the case of a direct connection of the positive (+) and negative (-) poles or as a result of accidental
contact with metal objects, the battery is short-circuited and the intense current will generate heat, which may cause housing
breakage or fire.
• Do not heat. If the batteries are heated to a temperature above 100 ° C, sealing and insulation separators and other polymer
components may be damaged, which may
