Clean the inside of the appliance with water & detergent with a non-abrasive
sponge.
DO NOT use metal scouring pads.
Ensure that the appliance is completely dry before use and standing at an upright
position for at least an hour before switching on the appliance.
Upon switching on the appliance for the first time, turn the Temperature Control
Dial to between 3~4. After half an hour, the temperature inside the appliance
should already be cool, and gradually getting colder.
Check that the Indicator Light, Compressor and Ventilation Fan are all working
smoothly. Let the Compressor operate for a period of at least 2 – 3 hours.
Always wear protective, insulated gloves when inserting or removing frozen
items from the appliance, especially if contact with the frozen items is prolonged.
The Freezer Door is heavy; please hold the Freezer Door Handle until the Freezer
Door is completely shut again. DO NOT let the Freezer Door fall by itself without
support.
Switch off the appliance and unplug the socket from the electric mains during
cleaning or performing any maintenance operation. Make sure at least 5 minutes
have elapsed before switching the appliance back on in order to protect the
compressor and the refrigeration system.
cover the appliance during functioning;
obstruct totally nor partially the air vents;
insert objects or body parts inside the protection cover of the appliance;
turn the Temperature Control Dial from 5 to 1;
use sharp objects to scrape the frost from the interior surfaces when defrosting;
put oversized foods or large amounts of food into the appliance at the same time;
store containers made of glass or canned items in the appliance;
store medicine or medical products in the appliance;
use any electrical appliances inside the Freezer;
use any mechanical devices such as fans, hair dryers, heaters, radiators, etc. to
accelerate the defrosting process;
move the appliance by the door handle.
11.
12.
13.
14.
15.
16.
Before use, check the integrity of the appliance and power cable. In case you are not
sure, contact a qualified person. If the power cable is damaged, it must be replaced
by the manufacturer or its service agent or a qualified technician in order to avoid a
shock hazard.
Before powering the appliance make sure the rating (voltage and frequency)
corresponding to the grid and the socket is suitable for the plug of the appliance,
and that the wall socket is properly grounded.
DO NOT power the appliance using multiple sockets. If possible, avoid the use of
adapters and/or extension cables; if their use is absolutely necessary, use only
materials in compliance with the current safety regulations and according to the
electrical parameters of the adapters.
The appliance must NOT be switched on using external timers and/or other remote
control appliances which are not specified in this manual.
Any accessories NOT recommended by the manufacturer may cause injuries to
persons.
If you are using the appliance for the first time, you should:
a.
b.
c.
d.
e.
f.
g.
Make sure to remove any label or protective sheet which may prevent its proper
functioning.
DO NOT:
•
•
•
•
•
•
•
•
•
•
•
3
