4. There are two holes on each plastic Handle and also on each side of the metal
Body. Join each plastic Handle onto the metal Body at each end by threading
four ST2.9 screws into each of the four holes (two at each end). The two
Handles are now attached to the Body.
5. Place the Zinc Plate onto the Body. Insert the straight metal pipe through 2 holes
of Zinc Plate and body on two sides.
Also, align the bottom holes in the Zinc Plate and the Body, and thread the M4
Screw though the holes. Use the M4 Nut to fasten the Zinc Plate to the Body.
