6
66
6
TURN ON THE POWER
Intensity Control
Variation in fragrance intensity is achieved by interruption of power to the heating circuit, when power is
being supplied the intensity LED’s are illuminated and during periods when the power has been interrupted
the fragrance intensity LED’s flash.
By reference to the chart below and location conditions/requirements use the intensity control button to set
the fragrance intensity to the desired level. (Repeatedly pressing the intensity control button will cause the
intensity level to cycle from minimum through maximum back to minimum).
INTENSITY LEVEL INDICATOR INTENSITY LEVEL
Level 1 20%
Level 2 25%
Level 3 40%
Level 4 55%
Level 5 75%
Level 6 100%
NB: The life of the fragrance cartridge is directly related to the intensity setting – the higher the setting
the shorter the cartridge life.
Fan Speed Control
The fan speed determines the speed and extent of fragrance dispersal. Select low for small rooms
and medium or high for larger rooms. (Repeatedly pressing the Fan Speed Control button will cause the
fan speed to cycle from low through high back to low).
Day / Night / 24 Hour Selector
The unit can be programmed to operate 24 hours per day or only when dark or only when light.
This feature is designed to extend cartridge life when circumstances allow for day only / night only operation.
Use the control button to select the desired option. (Repeatedly pressing the Selector Control button will
cause the option selected to cycle from night through 24 hour and back to night only operation).
Cartridge Usage Indicator
Since each of the 3 “channels” can be operated independently, for ease of servicing the unit
incorporates a separate visual cartridge status indicator for each “channel”. When the Green L.E.D. is
illuminated the cartridge is less than 50% used. When the Yellow L.E.D. illuminates the cartridge is more
than 50% used. When the Red L.E.D. illuminates the cartridge is exhausted and should be changed.
When a new cartridge is inserted and the reset button pressed the Red L.E.D. will extinguish and the Green
L.E.D. will be illuminated signifying the status of the new cartridge.
