Premier Hazard MDVR Series Manuale utente

INSTALLATION M-ALL MDVR-2012_Q2_Ver 1.0

1/30

Installation Manual

For

ALL MDVRs

Mobile Digital Video Recorder

INSTALLATION M-ALL MDVR-2012_Q2_Ver 1.0

2/30

Table of Content

NOTICE ................................................................................................................................................................. 3

Installation General Instruction ................................................................................................................................ 4

Part 1 MDVR Device Installation .......................................................................................................................... 5

1 Pre-Installation Pre aration .............................................................................................................................. 5

1.1 Technical Requirement........................................................................................................................... 5

1.2 Installer and Su ervisor Qualification ...................................................................................................... 5

1.3 Pre-installation Investigation and Installation Plan Making ........................................................................ 5

1.4 Reference Installation Tool ..................................................................................................................... 6

2 MDVR Device Installation ................................................................................................................................. 7

2.1 The Hard Disk Installation ...................................................................................................................... 8

2.2 Power Connection ................................................................................................................................. 8

2.2.1 Power Wire Requirement ............................................................................................................. 8

2.2.2 The Power Connection ................................................................................................................ 9

2.3 MDVR Device installation ....................................................................................................................... 9

2.4 How to Choose and Install Cameras ...................................................................................................... 11

2.5 Antenna (GPS/WIFI/3G) Connection ..................................................................................................... 15

2.6 Monitor Installation ............................................................................................................................. 17

2.7 How to connect the I/O Sensors ........................................................................................................... 17

2.8 How to Connect Alarm System ............................................................................................................ 19

2.9 How to Deal with the Connection for Cables and Wire ............................................................................ 21

Part 2 The Whole System Testing after Installation .............................................................................................. 21

1 MDVR Device Testing ..................................................................................................................................... 22

1.1 Ins ection before Power Connection ..................................................................................................... 22

1.2 Trial Testing after the System Gets the Power ........................................................................................ 22

1.3 Accessories Testing ............................................................................................................................. 23

1.4 MDVR Recording and Network Testing .................................................................................................. 23

1.4 1 MDVR Recording Testing ........................................................................................................... 23

1.4.2 I/O Sensor Testing .................................................................................................................... 24

1.4.3 Vehicle S eed and Pulse Testing ................................................................................................. 25

1.4.4 Wireless Network Testing .......................................................................................................... 25

1.4.5 Software U grade ...................................................................................................................... 27

1.4.6 Setu Machine Registration Information ...................................................................................... 28

1.4.7 Storage Format (HDD or SD Card) .............................................................................................. 28

A endix ............................................................................................................................................................. 28

Bus A lication ............................................................................................................................................ 29

The Table for Bandwidth and Frame Rate. ...................................................................................................... 30

INSTALLATION M-ALL MDVR-2012_Q2_Ver 1.0

3/30

NOTICE

Before you install the MDVR system in the vehicle, lease be familiar with this system and read this manual carefully.

Meanwhile the whole installation rocess must be guided by the rofessional ersons.

1. MDVR is electronic recording and storage system which must be delivered very carefully.

2. Use only a regular 12-volt DC or 24-volt DC (3 ~ 5 Am s) certified ower su ly for installation in vehicles. The

MDVR can su ort wide ower range from 8v ~36v DC. Please follow the installation and o erating instructions

rovided to ensure a steady and reliable installation. Handle all electric equi ments and connections ro erly to avoid

injuries.

3. Even though the recorder unit may not be turned on, live ower exists in the mounting assembly and recautions

should be taken to avoid shock or short circuit.

4. The MDVR installation and maintenance should be im lemented by the erson who is trained rofessionally.

5. Choose the right lace to install the recorder unit. The s ace must be big enough for ventilation. No any other

subjects around are allowed.

6. Install the MDVR in a dry location shielded from direct contact with excessive humidity and moisture, rain or other

sources of liquid s ills. Do not install on a recessed surface where liquids may accumulate or under surfaces where

liquids may dri .

7. Do not handle the MDVR with wet hands, while standing in water, or while in contact with other sources of water or

moisture that could create a shock hazard.

8. Install the MDVR out of direct sunlight and away from direct sources of heat, dust, vibration and high magnetic field

9. MDVR and accessories installation must be insulated with vehicle to avoid loo interference

10. Do not attach any external device (not recommended) to the recorder unit without s ecified or a roved by Vendor.

11. Attach the MDVR ground cable to the vehicle correctly to com lete the ower circuit.

12. Do not mount the unit to a surface subject to excessive vibration.

13. Do not take out or change any module when the MDVR is ower on.

14. Power su ly must connect to the vehicle battery ositive and negative olarity directly or UPS from vehicle. Any

other indirect ower connection is forbidden. In order to make sure the device and vehicle work fine, lease add a

fuse into the connection for rotection.

15. Please do maintenance routine for MDVR and accessories to avoid any screw loose or bad video image.

ISTM-ALL MDVR-2012_Q2_Ver 1.0

4/30

Installation General Instruction

Before install the recorder system and accessories, the most im ortant is to know the vehicle construction es ecially for

ower. Please check following:

1) Which MDVR model and accessories will be installed?

2) In which art of the vehicle can install the MDVR? How big the size is?

3) Cables and installation tools (for exam le: electric drill, screw driver, screws, multimeters etc…)

4) Man ower distribution

5) General conce t for wiring

6) Draft the s ecific installation guide for s ecific vehicle

Rough Installation Steps as below:

Ste 1: Pre aration

Ste 2: Installing Point Test

Ste 3: Installing

Ste 4: Testing

Ste 5: Ins ection

Ste 6: Finish the installation

Ste 7: Maintenance

ISTM-ALL MDVR-2012_Q2_Ver 1.0

5/30

Part 1 MDVR Device Installation

1 Pre-Installation Preparation

1.1 Technical Requirement

Be familiar with the MDVR device functions and a lication

Be familiar with the whole MDVR solution

Be familiar with the vehicle electrical circuit, vehicle structure and installation skills.

1.2 Installer and Supervisor Qualification

Supervisor Qualification and responsibility

1. He must be familiar with the installation requirements, the whole MDVR system (including MDVR

device and the relative accessories and PC software).

2. Assign the task to the installers and guild them for the installation

3. Control the installation schedule, installation ins ection to make sure that installation is correct and safe.

Installer Qualification:

1. He must be trained and qualified for installation

2. He must com ly with safety rules and use the installation tools safely

3. He must be very familiar with the vehicle working rinci le and the internal electronic equi ment

1.3 Pre-installation Investigation and Installation Plan aking

Before installation, the installer must do the investigation to know more for the installation environment including:

1. He must know the vehicle which will be installed MDVR in

2. The oint for installation and how to rotect the MDVR and accessories.

3. Camera and some other accessories installation

4. He should re are the suitable cable (the material for the cable and the length for the cable) for MDVR

installation.

5. All the commonly-used materials should be listed to make sure the installation go fast

6. Some other that is hel ful for installation

ISTM-ALL MDVR-2012_Q2_Ver 1.0

6/30

1.4 Reference Installation Tool

Item Name Photo Specification Function Remark

1 Electric Drill

Drill the holes

2 Drill bit

12mm

To drill the hole in the

vehicle to get the

ower cable out getting

the ower for the

MDVR.

3 Drill bit

2.8mm

To drill the hole for

cameras, monitor

bracket etc…

Philli

screwdriver

for screwing manually

digital

multimeter

for voltage testing and

short- circuit

ower cable

and Extention

7 wire stri er

for cable s liting and

connecting

8 Ribbon

9 Thread

Forming

To fix the camera and

monitor bracket

10 Log Bolts

for fixing MDVR

machine and roection

box

ISTM-ALL MDVR-2012_Q2_Ver 1.0

7/30

11 Insulating

ta e

for wra ing u the

wires

12 soldering iron

for welding

13 Tin Bar

14 Diagonal

Pliers

for cable connecting

15 Crim ing

Pliers

for cable connecting

16 Scissors for shrinkable tube cut

Heat Gun

for shrinkable tube

enca sulation

18 Glass glue

gun

for hole sealing and

fixation.

2 MDVR Device Installation

The basic Installation rinci al is:

1. All arts installation com lies to the rinci al: same ty e vehicle, same installation oint

2. Kee the vehicle clean and safe

The MDVR installation is the most art. Please make sure that the MDVR unit is fully and carefully tested before

installation to guarantee the installation can be com eted fast and easier and more convenient for ost-installation

maintenance.

1) MDVR working environ ent

The installer must know that MDVR works in harsh environment everyday and they have high requirements for

the environment and installer’s skill.

ISTM-ALL MDVR-2012_Q2_Ver 1.0

8/30

a) Anti-vibration: The MDVR device must be installed the lace with week vibration (for exam le: behind the

driver’s seat). Installing the MDVR on the rear of the vehicle with strong vibration or closing to the engine

is forbidden.

b) Ventilation: The MDVR device must be far away for the heating source in the vehicle. The installation oint

should be ventilated.

c) Water roof and Moisture roof: The device must be away from water or some other liquid source. If

necessary the external rotection device is recommended (lock box or installation bracket)

d) Dust roof: The device must be installed on the oint with little dust

e) Installation oints size: horizontal installing for MDVR device is recommend as it is easier for installation

and maintenance. The installation oint size must be big enough and the MDVR device cannot be

surrounded with other subjects are it is not good for ventilation.

f) Electric: The MDVR device must be far away from electromagnetism environment to avoid the strong

interference.

g) Wiring: The cables should be hidden to kee the vehicle clean

2) MDVR Protection

If the MDVR has to be installed in the harsh environment (with much dust and high moisture or easily to be

damaged humanly), The lock box or installation bracket rovided by manufacturer are recommended.

3) Installation

a) The MDVR must be installed horizontally (es ecially for the hard disk unit must be installed by this way)

b) The MDVR and accessories must be fix firmly to avoid strong vibration

c) The IR receiver and the LED should (on the front anel of the MDVR) be toward to the direction with easy

o eration

2.1 The Hard Disk Installation

Each MDVR is shi ed with the hard disk installation manual. Please read it very carefully. The wrong installation will

shorten the life of the hard disk.

2.2 Power Connection

2.2.1 Power Wire Requirement

Power wire material: according to the MDVR device maximum load, power cable should be 1.5mm 2.5mm

diameter BVV cable or with protection tube to ensure the wires are not frazzled and damaged easily.

ISTM-ALL MDVR-2012_Q2_Ver 1.0

9/30

2.2.2 The Power Connection

The ower su ly is the basic and critical for MDVR device working. The connection and wiring is very rigid for

installation.

1) The MDVR ower must be rovided by the battery of the vehicle. It must be connected with the ositive and

negative olarity of the battery directly (Below left diagram). Or the ower connects the vehicle ower control

box (Below right diagram). Any other ways for connection are forbidden as this will cause the unstable ower

su ly and affect MDVR working.

2) The ower extension should be a little bit longer to leave some s ace for movement during the vehicle is running.

The external rotection tube (fire resistant PVC bellow) are recommended. The diameter for the cable is

required to be from 1.5mm to 2.5mm. Even for the bigger ower consum tion MDVR device or 12V vehicle with

the long distance wiring requires that the cable diameter should be 2.0mm co er material inside.

The ower cable wiring should be vertical with the other cable wiring to avoid the equidirectional interference.

Security setting: safety device (like fuse) must be added between the device and battery.

2.3 DVR Device installation

The installation diagram

ISTM-ALL MDVR-2012_Q2_Ver 1.0

10/30

1. The MDVR cannot be installed on the vehicle floor directly. MDVR housing must be insulated with the

body of the vehicle. External rotection ca or box is necessary for water roof and dust roof.

2. Horizontal installation is recommended by manufacturer

3. The LED light on the MDVR front anel should be outward for each checking the MDVR working status and

receiving the IR signal.

4. Some ti s for installation:

（1） 12V natural gas anti-interference isolation

When install the MDVR in 12V natural gas vehicles, the MDVR device must be insulated with the body of the

vehicle. Get ower for the MDVR from vehicle battery directly and make sure to install the ower rotector and

security device between the MDVR device and battery.

（2） Pay attention to the olarity of electric ower switch control ( olarity test method: disconnect control

switch, take a wire from battery negative olarity, test it with digital multimeter. Connect this wire by

black en on the multimeter, then connect vehicle body with red en. If the circuit is working, this means that

vehicle ower switch control is ositive. If not, it is negative. If the vehicle switch is negative, it is

necessary to deal with the insulation between MDVR device and the accessories.

（3） It is very necessary for 12V battery- owered vehicles to deal with the insulation between the MDVR device and

the accessories of MDVR.

Positive

olarit

Negative olarity

Fuse

Vehicle Battery

Device to control the ignition of vehicle

MDVR ower in ut negative olarity

MDVR ower in ut ositive olarity(red)

Mobile VR

The lock for removable hard

disk case (lock it before booting

u the MDVR)

The ACC

signal cable

(yellow).

The voltage

is ≥7.5V

Indice

Altri manuali Premier Hazard Registratore digitale

Premier Hazard

Premier Hazard DVR208 SERIES Manuale utente

Manuali Registratore digitale popolari di altre marche

FLIR

FLIR M3100E Series Manuale utente

VTRACKPRO

VTRACKPRO FPRO300 Manuale utente

Swann

Swann NVR-7085 models Manuale utente

XtendLan

XtendLan DVR-1670C Manuale utente

urmet domus

urmet domus 1093/004AHD Manuale utente

Holux

Holux M1 Manuale utente

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Manuale utente

Whistler

Whistler D16VRS Manuale utente

Defender Security

Defender Security 82-20235 Manuale utente

MISUMI

MISUMI MP-WF100M Manuale utente

Speco

Speco D8HU Manuale utente

UST

UST DDR-E04AA Istruzioni per l’uso

Consolidated

Consolidated Digital Video Recorder Manuale utente

Mace

Mace DVR0404RW Guida rapida

RCA

RCA RTD315W Manuale utente

FSM

FSM Colibri Grande PRO Manuale utente

Hauppauge

Hauppauge HD PVR 2 Manuale utente

Identivision

Identivision ICR-PH161i PIONEER Manuale utente