Prestel MFCP-6 Manuale utente
USER MANUAL
Prestel MFCP-6
Milti-function control panel
2
Operating Instruction
Thank you for purchasing this product. For optimum performance and
safety, please read these instructions carefully before connecting,
operating or adjusting this product. Please keep this manual for future
reference.
SURGE PROTECTION DEVICE RECOMMENDED
This product contains sensitive electrical components that may be
damaged by electrical spikes, surges, electric shock, lightning strikes,
etc. Use of surge protection systems is highly recommended in order to
protect and extend the life of your equipment.
3
Operating Instruction
Table of Contents
1. Features.....................................................................................4
2. Package Contents.....................................................................4
3. Specifications............................................................................4
4. Panel Descriptions....................................................................5
5. Connecting and Operating.......................................................7
6. Application Diagrams...............................................................7
7. Remote Control Description.....................................................8
8. RS232 Pin
A
ssi
g
nment.............................................................8
9. RS232 Control............................................................................9
9.1 Software Control.......................................................................9
9.2 Command Control...................................................................12
10. Web Control...........................................................................15
Warrant
y
Polic
y
............................................................................17
4
Operating Instruction
Dear Customer
Thank you for purchasing this product. For optimum performance and safety, please read
these instructions carefully before connecting, operating or adjusting this product. Please
keep this manual for future reference.
1. Features
Work with customized control APP
RS232, RS485, IR Control and Relay
Smart IR learning
Page, toggle, compare and delay setting
ID loop function multi-level cascade
USB firmware update
2. Package Contents
1). 1x Main Unit (HDBaseT Matrix)
2).1x Power Cable (for Main Unit and POC)
3). 1x Remote control
4). 1xIR Extension cable
5). 1x mounting kit
6). 1x CD for control software & user manual
3. Specifications
Operating Temperature Range -5 to +35°C(-41 to +95 °F)
Operating Humidity Range 5 to 90 % RH (no condensation)
Input Video Signal 0.5-1.0 volts p-p
Input DDC Signal 5 volts p-p (TTL)
Signaling Rate 3.0Gbit/s
Video Format Supported 4K@60,YUV420
4k@30/1080P/1080i/720P/576P/480P/576i/480i
HDCP Compliant HDCP2.2 and HDCP1.4
Output Video HDMI2.0 and HDMI 1.4 (over HDBaseT)
Audio Format Supported DTS-HD、Dolby trueHD
Power Consumption 9wtts (Max.)
Dimensions L86 x W86 x H40 mm
Mass (Main Unit) 0.12kg
5
Operating Instruction
4. Panel Descriptions
1LED ②USB Update ③Key(Button)
④IR in ⑤IR LED ⑥Knob
⑦Knob LED
①Ethernet ②IR-TX ③Relay 1
④Relay 2 ⑤RS232-1. ⑥RS232-2
⑦RS485 ⑧DC power 24V.
6
Operating Instruction
3.2 USB Driver installation
Before connecting the product, you need to copy "STM32 USB transfer serial Port Driver
Virtual COM Port Driver (V1.3.1", double-click the software running in the installation
package (as shown in figure 1 below), and install the Driver on the computer.
1) The above selection of the computer adaption-driven solution installation as follows.
2) Then pops up the following window:
7
Operating Instruction
3) Once again, click the next step, and the computer starts to install the driver. After the
installation, the instructions are as follows.
4) After the installation is completed, it will be used as the above prompt to access the
device manager to check the correct identification of the device.As shown in the figure
below.
8
Operating Instruction
3.3.0 Native mode introduction
1). LCD is divided into two parts, as below picture:
A) Left side show the information about the Trigger source and the action of the binding
execution. (S= Source; A=Action）
①S: Trigger source. External trigger: including key, infrared reception, RS232 reception,
etc
②A: Action. The reaction of device, including RS232 transmission, infrared emission, relay
control, etc.
B). Right side show the mode description and some basic Settings information
2). Introduction of the Right Side:
A). M0: Main mode (divided into: run; ctrl; set; study)
B). M1: Auxiliary mode (divided into: normal; extend0; extend1; studyuse)
C). Action count: (The action count currently being performed/Total action number )
D). L0: LED brightness level (0=off; 4=max)
E). L1: LCD back light’s brightness level (0=off; 4=max)
F).ID0:LocalID
G). ID1: Remote ID
H). B0: RS232’s baud rate (include: 115200-57600-38400-19200-14400-9600)
I). B1: RS232’s baud rate (include: 115200-57600-38400-19200-14400-9600)
J). B2: RS485’s baud rate (include: 115200-57600-38400-19200-14400-9600)
3.3.1: Main mode introduction
1). Long press Rotating encoder: can switch the main mode in sequence
A). Run = Execution mode, in this mode, auxiliary mode + trigger source can generate
triggering events, and device performs binding actions
B). Ctrl = Mapping mode, If more than one device access to a local area net by UTP
cables, then device mapping can be done. When a device enters this mode, All of the
triggering event through the device (host) can be forwarded to the corresponding device’s
remote ID , so as to achieve the remote mapping. In this mode, device, as the host, will no
longer execute the trigger event, only a forwarding action.
C). Set = Setting mode, device includes RS232, RS485, Infrared emission, etc., with some
adjustable Settings. In the Setting mode, there are two pages, and the second page
displays some information such as IP.
Note: under the second page of this mode, the long press KEY1 will be soft restart device
to facilitate users to continuously upgrade the firmware
9
Operating Instruction
D). Study = Infrared Study Mode
1). Under this mode, the auxiliary mode does not work and cannot be switched
2). Under this mode, the trigger source fails, only the infrared waveform can be captured
and the waveform is stored locally.
2). Short press Rotating encoder: The auxiliary mode can be switched in turn
Note:
A). Auxiliary mode only works in the main mode: run and ctrl
B). Auxiliary mode is divided into normal, extend0, extend1, studyuse.
C). When the main mode is CTRL
The trigger event, including the auxiliary mode, is packaged and forwarded to other
device, which no longer performs the action that triggers the binding event.
D). When the main mode is run
The auxiliary mode is studyuse. When the trigger event occurs, if the action has infrared
emission, then the waveform of infrared emission is the waveform learned by the main
mode “study”
E). Auxiliary mode is normal, extend0, extend1, so when the trigger event occurs, if the
action has infrared emission, then the waveform of infrared emission is the key value
waveform of matching remote control.
3). Double-Click The Rotating encoder: Page up and down and execution mode.
*The above mode, Rotating encoder's short press, double click, long press to be occupied,
used as function button, unprogrammable.
3.3.2: Main mode Notice
Open device's TOOL:
1). When the Main mode switches to “run”, the auxiliary mode's function and
attention matters, as shown in the following table:
10
Operating Instruction
Auxiliary mode Normal Extend0 Extend1 Studyuse
Trigger
source
KEY Short/long press
RS232
Receive Data length<1024bytes
RS485
Receive Data length<1024bytes
Rotating
encoder 20 steps
IR Receive Remote control
LAN
Receive Receive specific protocol data
Action
RS232 Send Data length<1024bytes
RS485 Send Data length<1024bytes
Relay On/off Switchable
LED On/off Switchable
Buzzer On/off Switchable
IR Send Remote control
Send the
learning
remote
signal
2). When the Main mode switches to “set”
A). K1S (KEY 1 short press): In turn to adjust “L0”
B). K2S (KEY 2 short press): In turn to adjust “L1”
C). K3S (KEY 3 short press): In turn to adjust “B0”
D). K4S (KEY 4 short press): In turn to adjust “B1”
E). K5S (KEY 5 short press): In turn to adjust “B2”
F). K6S (KEY 6 short press): The cursor jumps between ID0, ID1, IR0FREQ, IR1FREQ.
①ID0: Adjustable: 0-99
②ID1: Adjustable: 0-99. 0 have a special function: When the Host ID1 set to 0, the Host
will open the broadcast map, and under the CRTL mode, the Host forwards the trigger
event to all device.
③IR0FREQ: Adjustable: 20000-60000
④IR1FREQ: Adjustable: 20000-60000
G). K6L (KEY 6 Long press): Save the setting to Local
H). On the basis of “F)”, Rotate the encoder to the left to reduce the value of the cursor
I). On the basis of “F)”, Rotate the encoder to the right to add the value of the cursor
J). Under Set Mode. Double-click the rotary encoder to turn to page 2.
Indice
