Using your Dream Player LITE
3.2 Audio Output Connector
The Dream Player LITE will drive any audio amplifier or powered speakers or media
speakers that are typically used on a computer. A very nifty feature of The Dream Player
LITE is that it can directly drive non-powered or conventional speakers without an
amplifier, headphones or ear buds for example.
Prices of media speakers are quite reasonable and you may obtain then from practically
every computer store and electronic outlet. Depending on the quality and volume you are
trying to achieve, these speakers can be
purchased anywhere from $15-$50, or as
high as $100+. We have found that
many of the $35-$50 speakers sound
terrific for any application and meet
most of our customer‟s needs just fine,
and some of them are quite small and
easy to conceal. Choose your speakers
wisely as the best audio you can get is
often times limited by the quality of the
speakers you choose. If you are at a loss
for what speakers to get, we offer some
reviews of speakers we have purchased
on-line with some links to how you may
purchase them. Please visit
www.pricom.com
To connect the speakers to the Dream
Player LITE, you simply plug-in the
stereo plug from the speakers into the
Audio Output jack on the Dream Player.
You can insert as many extensions as
needed to accomplish your wiring. These
extensions are 1/8” stereo cables, and
sometimes are sold as headphone
extension cables. Again many electronic
stores will sell this item.
To avoid „blowing something up‟ set the volume on the speakers‟ pretty low to start with,
and then adjust as appropriate for your sounds and speaker setup. All sounds are clearly
not created and mixed on equal levels, and we would hate for you for blow a good set of
speakers after start-up. To state the obvious, start low and work your way up from there.
