IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE INSTALLATION, OPERATION, OR MAINTENANCE OF PRODUCT.
Some of the following information may not apply to your particular product model; however, as with any electronic
product, precautions should be observed during installation, operation, and maintenance.
lInstallation must conform to state or local building codes and ordinances.
lInstallation or maintenance should be performed only by qualified personnel as defined in the Local Electrical
Code.
lMount in location where device will not readily be subject to tampering.
lAny wiring instructions must be followed precisely. Failure to do so could cause permanent equipment damage.
lTo avoid possible electric shock or damage to the device, disconnect power source before installation or
servicing.
lDo not install or use device near water. To reduce the risk of electrical shock, do not expose device to rain or
moisture. Device must not be exposed to dripping or splashing and no objects filled with liquids, such as vases,
must be placed on the device.
lDevice is designed for indoor use only. Operating outdoors, or in wet areas, is an electrical hazard and may
damage the equipment while nullifying the warranty.
lDevice is cleanable with a cloth moistened with water or a common disinfectant. Be sure to test any cleaning
solutions on a small area of the clock before using it on the entire device.
lFor healthcare facilities, devices are not intended for patient use and must not be installed within 6ft (2m) of
patient contact.
AC-Power Pluggable Clock/Timer Models
lAC main power supply must be disconnected while installing or performing maintenance of any device. To
completely disconnect the power input, the main plug should be disconnected from the main socket outlet
completely.
lThe main socket outlet must provide a protective earthing connection where the outlet has a protective earth
(ground) connection.
lMain plug is used as disconnect device and it should remain readily operable during intended use.
AC-Power Hardwired Clock/Timer Models
lAC power must be supplied from a circuit that has a resettable circuit breaker.
lAC mains power supply must be disconnected while installing or performing maintenance of any device. Open
the circuit breaker supplying the device before attempting installation, maintenance, or repairs.
Primex Wireless XR Classic Series Digital Clock/Timers Installation Guide 6
