PUMP WATCH™EXPRESS
UPGRADE
User Instructions
Failure to follow these precautions could result in serious injury or death.
Keep these instructions with warranty after installation. This product must be
installed in accordance with National Electrical Code, ANSI/NFPA 70 so as to
prevent moisture from entering or accumulating within the controller housing.
ELECTRICAL SHOCK HAZARD
A qualified service person must install and service this product
according to applicable codes and electrical schematics.
Disconnect power prior to servicing an equipment with the
Pump Watch™Express.
EXPLOSION OR FIRE HAZARD
Do not use this product with flammable liquids. Do not install in
hazardous locations as defined by National Electrical Code,
ANSI/NFPA 70.
• Do not connect power to this equipment if it has been damaged or has
any missing parts.
• Do not install in areas with: excessive or conductive dust, corrosive or
flammable gas, moisture or rain, excessive heat, regular impact shocks,
or excessive vibration.
PRIMEX®1 Pump Watch™Express Upgrade User Manual
1. Introduction:
Verizon CDMA cellular service is going to end December 31st, 2019. All Pump Watch™ Express units
must be upgraded to 4G LTE units for continued service. It is worth noting that in some areas, Verizon
has already begun the process of removing CDMA transmitters and replacing them with 4G LTE.
2. Ordering Pump Watch Express Upgrade/Replacement Part Numbers:
PART# DESCRIPTION
1062214 PWE, LIGHT, RTU REPLACEMENT UNIT 4G, LTE VZ, PRIX
1062215 PWE, PREMIUM, RTU REPLACEMENT UNIT 4G, LTE VZ, PRIX
1062216 PWE, GATEWAY, RTU REPLACEMENT UNIT 4G, LTE VZ, PRIX
