Prince Castle 164-a Manuale utente

OPERATING

INSTRUCTIONS

Manual Grill Tool Sharpener

Model No. 164-A

355 East Kehoe Blvd. l Carol Stream, IL 60188

Tel: (630) 62-8800 l Fax: (630) 62-1 60

Toll Free: 1-800-PCASTLE

Printed in September 1997

Prince Castle Inc. 164-504

SPECIFICATION

164-A Dimensions

Length 17 (43.18 cm)

Wi th 8 (20.32 cm)

Height 7 (17.78 cm)

Shipping Weight 22lbs. (10 kg.)

The Prince Castle manual grill tool sharpener gives a

quick sharpene straight e ge to scrapers an

spatulas. Sharp spatulas pick up grille meat

cleanly without tearing the seare surface. Natural

juices are kept in foo for more flavor, an a more

appetizing appearance. With precision e ges

cleanup is quick an easy without scratching. Plus,

compact size of the manual grill tool sharpener

saves valuable counter space.

LIMITED WARRANTY

This pro uct is warrante to be free from efects in

material an /or workmanship for a perio of one

year from ate of original installation, not to excee

18 months from ate of shipment from our factory.

Any component which proves to be faulty in material

an /or workmanship will be replace or repaire (at

the option of Prince Castle, Inc.) without cost to the

customer for parts or labor.

This warranty is subject to the following exceptions/

con itions:

lUse of any non-genuine Prince Castle parts

voi s this warranty. All genuine Prince Castle

replacement spare parts are warrante for ninety

(90) ays from ate of purchase.

lDamage cause by carelessness, neglect, an /

or abuse (e.g., ropping, tampering or altering

parts), equipment amage in shipment, by fire,

floo or an act of Go is not covere un er this

warranty.

lThis unit is portable, charges for on location

service (i.e. trip charges, mileage) are not in-

clu e in the provisions of the warranty.

TABLE OF CONTENTS PAGE

Installation..................................................................... 2

Operating ....................................................................... 2

Parts List....................................................................... 3

Troubleshooting ............................................................ 4

Non-sche ule Maintenance ....................................... 4

INSTALLATION

1. After you have remove the sharpener from the

carton, inspect the unit for signs of amage. If there

is amage to the unit:

lNotify carrier within 24 hours after elivery.

lSave carton an packing materials for inspection

purposes.

lContact the Prince Castle Customer Sales

Department at 1-800-722-7853 to arrange for

a replacement to be sent.

2. Verify that all parts have been receive .

3. Clean spatulas an scraper bla es with soap an

water. Dry thoroughly before sharpening.

4. Assemble knob (item A in figure 1) to back frame of

sharpener.

IMPORTANT: The knob can be assemble to either

si e of back frame epen ing if operator is left or right

han e .

OPERATION

5. Turn carriage knob (item C in figure 1) counter-

clockwise to open jaws.

6. Lift carriage assembly (item B in figure 1) by large

knob (item C in figure 1) upwar until it stops. Hol

in this position.

8. Press gauge stop bar (item D in figure 1) tab

ownwar until it makes contact with stop pin (item

E in figure 1).

9. Insert meat spatula or grill scraper bla e squarely

against gauge stop bar (item D in figure 1).

IMPORTANT: Center spatula in carriage.

10. Tighten jaws by turning carriage knob (item C in

figure 1) clockwise while hol ing carriage in the up

position.

11. Lift gauge bar (item D in figure 1) upwar over

etent pin locate on the si e of the carriage. This

pin hol s the gauge bar up.

12. Lower carriage assembly (item B in figure 1) with

tool to rest on the file.

13. While hol ing carriage knob (item C in figure 1) with

one han an knob (item A in figure 1) with the

other, sli e carriage back an forth on file, applying

mo erate pressure. Continue until spatula has

goo sharp e ge.

14. Remove sharpene tool an burn from back si e by

sli ing along file.

15. Roun corners by using a curve motion against the

e ge of the file. Use the bar as a gui e.

16. Wash tool, sanitize an ry.

CAUTION: Handle ool carefully o avoid

ge ing cu .

TO SHARPEN REDI-GRIL BLADES

1. Place bla e in special hol er over pins with bevele

si e up. See figure 2.

2. Hol bla e with fingers an turn hol er over.

3. Insert tool in carriage assembly against gauge

stop.

4. Repeat steps three through 13 un er operation.

figure 1

figure 2

ITEM PART NO. DESCRIPTION

1 164-33 Side Frame

2 164-32 Side Frame Support

3 164-31 File Support

4 164-27 File

5 164-70 Large File Clamp

6 164-71 Small File Clamp

7 164-60 Knob Assembl

8 164-28 File Cleaner Bracket

9 89-057 File Cleaner

10 164-62 Foot Kit (Pkg. of 4)

12 164-34 Rt. Hd. Bearing Bracket

13 164-35 Lt. Hd. Bearing Bracket

14 164-26 Carriage Shaft

15 164-39 Carriage Bumper

16 62-016 Flange Bearing Plastic

17 164-48 ASlide Locking Plate

18 578-294 Mounting Bar Assembl

18a 578-239 Clamping Handle Stem

18b 578-255 Locking Jaw Mounting Bar

18c 89-305 Basic External Retaining Ring

19 164-58S Knob

20 76-384 Set Screw

21 68-003 Roll Pin

22 89-582 Spring Plunger

23 164-38 Gauge Stop

24 164-43 Spacer

EXPLODED VIEW

ITEM PART NO. DESCRIPTION

25 578-282S Scraper Holder Assembl

(optional)

26 578-259 Scraper Holder

27 152-45 Handle

A 76-509 Screw Hex Head Cap

68/16 X 7/8

79-077 Washer, Flat 3/8 I.D.

B 76-311 Screw Hex Head

1/4-20 X 1

79-032 Washer, Flat 3/8 I.D.

C 76-506 Screw Soc. Head Cap

10-24 X 1/2

(Part of 164-62)

D 76-021 Screw Rd. Hd.

6-32 X 1/4

E 76-261 Screw Soc. Head Cap

1/4-20 X 7/8

73-022 Nut, Hex, 1/4-20

F 76-508 Screw Soc. Head Cap

5/16-18 X 3/4

H 76-507S Screw Soc. Head Cap

10-24 X 3/4 (Pkg. of 12)

J 76-061 Screw Hex Head

1/4-20 X 3/4

79-032 Washer, Flat .281 I.D.

K 73-086 Nut

79-028 Washer

PARTS LIST

TROUBLESHOOTING GUIDE

NON-SCHEDULED MAINTENANCE

Un er normal con itions with proper use an cleaning,

very little non-sche ule maintenance is require for

this unit. However, this section provi es proce ures for

checking an replacement of the various parts use

within the cabinet in the event that it becomes neces-

sary. Before replacement of any parts, refer to the

troubleshooting gui e above. This gui e will assist in

etermining the cause of any malfunction to insure

maintenance is require .

To change file or change to new position on existing

file:

A. Remove (2) screws. See item A in figure 3.

B. Turn file 180 egrees.

C. Tighten screws.

D. To use other positions of file, reverse file clamps.

See item B in figure 3.

figure 3

PROBLEM

Tool e ge not Tool not line up properly in carriage Reposition tool in carriage hol er.

parallel. against gauge stop.

File worn. Reposition file to new surface.

IMPORTANT: The file can be turne to four

positions.

PROBABLE CAUSE CORRECTIVE ACTION

Indice

Altri manuali Prince Castle Utensili elettrici

Prince Castle

Prince Castle Redi-Gril 164-B Manuale utente

Manuali Utensili elettrici popolari di altre marche

AEG

AEG OMNI-JS Manuale utente

SIP

SIP 01533 Manuale utente

Ribimex

Ribimex PRS499 Manuale utente

3M Fiber Optic Connector Crimp Tool Manuale utente

Ryobi

Ryobi P524 Manuale utente

ROJEK

ROJEK FSN 300A Manuale utente

Kemper

Kemper 1740PRO Manuale utente

WABCO

WABCO OptiTire Manuale utente

EINHELL

EINHELL TE-MS 18/210 Li Manuale utente

Orgapack

Orgapack OR-T 85 Guida rapida

TOUGHCUT

TOUGHCUT Diamond 400 Manuale utente

Yaros

Yaros PB-3603 Manuale utente

Fein

Fein BSS 2.0 E Guida all'installazione

Baileigh Industrial

Baileigh Industrial SS-2725 Manuale utente

Milwaukee

Milwaukee 2674-20 Manuale utente

Fein

Fein BLs 1.6 Manuale utente

Princess

Princess Electric Multi Sharpener Manuale utente

FOREDOM

FOREDOM K.1050 Manuale