Pro ceed PCD 3 Manuale utente

Table of contents

About Compact Disc Digital Audio… ....................................................... 2

Front panel ................................................................................................... 3

Display.......................................................................................................... 6

Remote Control ........................................................................................... 7

Rear panel, PCD 3 ....................................................................................... 8

Rear panel, PDT 3 ...................................................................................... 10

Unpacking ................................................................................................. 12

Set-up and installation .............................................................................. 13

Installing the spikes (optional) ................................................................ 13

Removing the transport screws ............................................................. 14

Location .................................................................................................... 15

A word about cables ..............................................................................15

A word about balanced output ........................................................... 15

Audio connections, PCD 3 ..................................................................... 15

Audio connections, PDT 3 ...................................................................... 16

Power supply connection ...................................................................... 16

master power switch ...............................................................................16

Installing batteries in the Remote Control ............................................ 16

Basic operation ......................................................................................... 17

Loading a CD .......................................................................................... 17

Playing all tracks on a CD ...................................................................... 17

Beginning play with a track other than the first track ......................... 17

Replaying a track .................................................................................... 18

Skipping to another track ....................................................................... 18

Searching for a passage on the CD ..................................................... 18

Beginning play in the middle of a track ............................................... 18

The "pause" function ............................................................................... 19

Repeating all tracks on the CD ............................................................. 19

Stopping play ........................................................................................... 19

Programming ............................................................................................. 20

Entering a program ................................................................................. 20

Replaying a selection in the program .................................................. 20

Skipping to another selection in the program ..................................... 21

Searching for a passage in the program ............................................. 21

The "pause" function ............................................................................... 21

Repeating all tracks in a program......................................................... 21

Stopping play ........................................................................................... 21

Care and maintenance ........................................................................... 22

Cleaning the PCD 3/PDT 3 ..................................................................... 22

Caring for the Remote Control .............................................................. 22

Caring for Compact Discs ...................................................................... 22

Specifications, PCD 3 ................................................................................ 23

Pin assignments, male XLR balanced analog output ......................... 23

Specifications, PDT 3 ................................................................................. 24

Pin assignments, male XLR digital output ............................................. 24

Troubleshooting ......................................................................................... 25

Service ....................................................................................................... 27

Direction the disc rotates

Direction the laser

pickup travels

About Compact Disc

Digital Audio…

To most people, a Compact Disc (CD) looks like a small, silver

phonograph record. In fact, there are some important differences

between records and CDs.

The information on a phonograph record is contained within its

grooves. This

analog

information is read by a stylus riding along in the

grooves and transmitted via a cartridge. The

digital

information on a

CD, though arranged in similar grooves, is read by a laser mechanism

(called a

pickup

). A phonograph's stylus

must be in contact with the record,

but a CD player's pickup never

touches the CD. The information

on the CD is transmitted via

complex decoder circuitry.

The CD rotates

counterclockwise, and the laser

pickup reads the underside of the

CD (the side opposite the label)

beginning at the center and

travelling toward the outer edge. As

the pickup moves away from the

center, the speed of rotation gradually

decreases from 500 to 200 revolutions per minute.

Programs on CDs are organized into

tracks

, usually corresponding to

songs or movements. This allows the user to easily and precisely select

a part of a program with virtually no wear and tear on the CD. There

may be as many

as 99 tracks on a

CD.

On some CDs,

tracks are further

broken down into

indexes

. These

"tracks within

tracks" allow even

more precise

selection and programming. A single track may have up to 99

indexes.

Lindsay's First Symphony

01 02 03 04 05 06 94 95 96 97 98 99

Index Numbers from Track 2

(Track 1) (Track 2) (Track 3)

First Movement Second Movement Third Movement

Front panel

playstop

pause

drawer

standby

index

progm repeat

error

11 14

127

6 5

2 43

TRACK INDEX MIN SEC

1 standby

When the master power switch on the rear panel is in the "|" (on)

position, pressing this button takes the PCD 3/PDT 3 out of

“standby”mode, turns the Display on, and makes the PCD 3/PDT 3

ready to play a CD. Pressing the button again puts the

PCD 3/PDT 3 in standby mode and clears any previously

programmed sequence of selections. (See "Rear panel" and "Set-

up and installation.")

2 play

After a CD is loaded into the drawer, pressing this button begins

play with the first track on the CD (or the first track in a

programmed sequence).

If you press play while the drawer is open, the drawer closes and

play starts beginning with the first track on the CD.

Pressing play while a CD is playing suspends play, returns to the

beginning of the current track, and replays that track.

3 stop

Pressing this button while a CD is playing stops play and clears any

previously programmed sequence of selections.

Pressing play after pressing stop begins play again with the first

track on the CD.

4 pause

While a CD is playing, pressing this button suspends play; pressing it

again resumes play at the point where pause was first pressed.

The LED above the pause button lights while play is suspended.

5 next

Pressing this button while a CD is playing suspends play, “skips”to

the next track on the CD (or the next track in a programmed

sequence), and begins playing that track.

Pressing next before play begins skips to the beginning of the next

track; pressing play begins playing that track.

6prev

Like the next button, pressing prev while a CD is playing suspends

play, “skips”to the previous track on the CD (or the previous track

in a programmed sequence), and begins playing that track.

Pressing prev before play begins skips to the beginning of the

previous track; pressing play begins playing that track.

7 progm

Pressing this button after making a selection (using next, prev, next

index, prev index, or the numbered buttons on the Remote

Control) enters it as part of a programmed sequence. (See

"Programming.")

The LED above the progm button will flash while you assemble a

program. This LED will remain lighted after an entry is made and

while a sequence is playing.

8>>

Holding this button down during play moves the laser pickup

toward the end of the CD.

During search, the pickup moves at three different speeds,

increasing in speed the longer you hold down the >> button. At

the first two search speeds, the volume is reduced; at the fastest

search speed, the volume is muted completely.

When you release >>, play resumes.

9<<

This button works in the same way as >>, except that it moves the

laser pickup toward the beginning of the CD.

10 next index

If the CD in play has indexes, pressing this button skips the laser

pickup to the next index on the CD, and the index number on the

Display will increase. (See "Display.")

11 prev index

This button works in the same way as next index, except that it

moves the laser pickup toward the beginning of the CD.

12 repeat

Pressing this button before or during play causes all tracks on the

CD (or all selections in a programmed sequence) to repeat

indefinitely. To cancel this function, press repeat again.

The LED above the repeat button lights while the repeat function is

active.

13 drawer

Pressing this button opens the drawer; pressing it again closes the

drawer.

Pressing drawer while a CD is playing stops play, clears any

previously programmed sequence of selections, and opens the

drawer.

NEVER hold onto the drawer while it's in motion (either opening or

closing). If you accidentally prevent the drawer from opening, wait

about three seconds, then press drawer twice to open it. If you

accidentally prevent the drawer from closing, it will open again

after about three seconds. Press drawer again to close it.

14 error

This LED will light when a function is entered incorrectly.

15 Display

This window displays information about track, index, and elapsed

time. (See "Display.")

16 Remote sensor window

This window receives the infrared signals from the Remote Control,

allowing remote operation. Make sure that this window is not

blocked. (See "Remote Control.")

17 Drawer

The drawer contains the tray that holds the CD during play. Its

operation is controlled by the drawer button.

PRECAUTION

Display

21 3

TRACK INDEX MIN SEC

1 TRACK

Before play begins, this part of the Display shows the total number

of tracks on the CD.

During play, this part of the Display shows the number of the track

in play.

While play is suspended using pause, it shows the track that was

playing when play was suspended.

2 INDEX

Before play, this part of the Display is blank.

If the CD in play has indexes, this part of the Display shows the

index on the CD beginning with “01”and increasing as the CD

plays.

If the CD in play has no indexes, this part of the Display shows “01”

throughout play.

3 MIN SEC

Before play, this part of the Display shows the total time for all

tracks on the CD.

During play, this part of the Display shows the elapsed time for the

track in play.

After you enter a selection into the memory (as part of a

program), the MIN part of the Display shows "P." (See

"Programming.")

TRACK INDEX

Remote Control

STOP/CM

PLAYPREV

>> PAUSE<<

231

564

897

0 PROGR

REPEAT

1 PLAY 6 PROGR

2 STOP/CM (STOP) 7<<

3 PAUSE 8 >>

4 NEXT 9 REPEAT

5 PREV

Each of these buttons (1 –9) performs the same function as its

counterpart on the front panel. (See “Front panel.”)

10 Numbered buttons

These buttons may be used to select tracks when programming a

sequence of tracks.

The numbered buttons may also be used to select a particular

track (instead of using the NEXT or PREV buttons). Pressing a track

number before play, the pressing PLAY, begins play with that track

and continues playing tracks on the CD in order.

Pressing a track number during play, then pressing PLAY,skips to

that track and begins play, then continues playing tracks on the

CD in order.

11 Projection lens

Infrared (IR) commands from the Remote Control to the

PCD 3/PDT 3 are transmitted through this lens.

Rear panel, PCD 3

master

power

digital

output

balanced

unbalanced

3 3

MADRIGAL AUDIO LABORATORIES, INC.

PROCEED®

COMPACT DISC PLAYER

MODEL NO:

SERIAL NO:

MANUFACTURED:

50-60 HZ

25 WATTS VOLTS

A, 250V

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR

MOISTURE.

CAUTION:

TO REDUCE THE RISK OF ELECTRICAL

SHOCK, DO NOT REMOVE COVER. NO USER-

SERVICEABLE PARTS INSIDE. REFER SERVICING TO

QUALIFIED PERSONNEL.

CAUTION:

FOR CONTINUED

PROTECTION AGAINST RISK OF

FIRE, REPLACE ONLY WITH THE

SAME TYPE OF FUSE:

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

right-channel output

balanced

unbalanced

left-channel output

PROCEED®PCD 3

made in u.s.a.

1 master power

This switch turns the PCD 3 on and off. The switch must be in the "|"

(on) position for the PCD 3 to operate. (See "Set-up and

installation.")

NEVER operate the master power switch without first making sure

that power is turned off to your receiver, integrated amplifier, or

preamplifier/power amplifier.

2 unbalanced outputs

These outputs provide single-ended analog audio (via cables

equipped with RCA-type connectors) to a receiver, integrated

amplifier, or preamplifier equipped with single-ended inputs. Most

components accept this type of output. (See "Set-up and

installation.")

3 balanced outputs

These outputs provide balanced analog audio (via cables

equipped with XLR-type connectors) to a preamplifier, integrated

amplifier, or receiver equipped with balanced inputs. (See "Set-up

and installation.")

4 RCA (SPDIF) digital output

This output provides digital audio (via a cable equipped with RCA-

type connectors) to the digital input of a receiver, integrated

amplifier, preamplifier, or digital processor. (See "Set-up and

installation.")

PRECAUTION

5 AC power cord

This cord supplies AC power to the PCD 3. (See "Set-up and

installation.")

6 Fuse

This holder contains the main fuse for the PCD 3. If the fuse ever

needs to be replaced, contact your Proceed dealer.

543

MADRIGAL AUDIO LABORATORIES, INC.

PROCEED®COMPACT DISC PLAYER

MODEL NO:

SERIAL NO:

MANUFACTURED:

50-60 HZ

25 WATTS VOLTS

A, 250V

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR

MOISTURE.

CAUTION:

TO REDUCE THE RISK OF ELECTRICAL

SHOCK, DO NOT REMOVE COVER. NO USER-

SERVICEABLE PARTS INSIDE. REFER SERVICING TO

QUALIFIED PERSONNEL.

CAUTION:

FOR CONTINUED

PROTECTION AGAINST RISK OF

FIRE, REPLACE ONLY WITH THE

SAME TYPE OF FUSE:

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

master

power

PROCEED®PDT 3

made in u.s.a.

digital

outputs

spdif aes/ebu st eiaj

Rear panel, PDT 3

1 master power

This switch turns the PDT 3 on and off. The switch must be in the "|"

(on) position for the PDT 3 to function. (See "Set-up and

installation.")

NEVER operate the master power switch without first making sure

that power is turned off to your receiver, integrated amplifier, or

preamplifier/power amplifier.

2 spdif (RCA) digital output

This output provides digital audio (via a cable equipped with RCA-

type connectors) to the digital input of a receiver, integrated

amplifier, preamplifier, or digital processor. (See "Set-up and

installation.")

3 aes/ebu (XLR) digital output

This output provides digital audio (via a cable equipped with XLR-

type connectors) to the digital input of a receiver, integrated

amplifier, preamplifier, or digital processor. (See "Set-up and

installation.")

4 st (AT&T) digital output

This output provides digital audio (via an optical cable equipped

with ST-type connectors) to the optical digital input of a receiver,

integrated amplifier, preamplifier, or digital processor. (See "Set-up

and installation.")

PRECAUTION

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Pro ceed Lettore CD

Pro ceed

Pro ceed Disk processor Manuale utente

Manuali Lettore CD popolari di altre marche

RCA

RCA RP-7923 Manuale utente

Pioneer

Pioneer DEH-P3550MP XM Manuale utente

Philips

Philips AZ1207 Manuale utente

Philips

Philips CD582 Manuale utente

Philips

Philips AZ 6821 Manuale utente

Lasonic

Lasonic MSU-2020 Manuale utente

THOMSON

THOMSON RCD150 Manuale utente

Denon

Denon DCD-1420 Manuale utente

Panasonic

Panasonic SJ-MR100 Manuale utente

Onkyo

Onkyo DX-7210 Manuale utente

Sony

Sony MZ-R3 Manuale utente

Denon

Denon DVM-4800 Manuale utente

JBL

JBL MR-32 Manuale utente

RCA

RCA RCD152 Manuale utente

Technics

Technics SL-PS770A Manuale utente

Clarion

Clarion compact disc Manuale utente

Sony

Sony MZ-M10 Manuale utente

Philips

Philips Expanium AZ 1538 Manuale utente