Pro-face PS-2000B Series Manuale utente

Built-in Computer

PS-2000B Series

User Manual

When printing out this PDF manual, since the printer setting can effect the

quality of the printout, be sure your printer’s quality setting is set to “High”.

1. It is forbidden to copy the contents of this manual in whole, or in part,

without the permission of the Digital Electronics Corporation.

2. The information in this manual is subject to change without notice.

3. This manual was written with care; however, if you should find any errors or

omissions, please contact Pro-face and inform them of your findings.

4. Please be aware that Digital Electronics Corporation shall not be held liable

by the user for any damages, losses, or third party claims arising from the

uses of this product.

Product names used in this manual are the trademarks of their respective manufac-

turers.

Preface

Thank you for purchasing Pro-face's PS-2000B Series Built-in Computer, hereaf-

ter referred to as the "PS-B" or "PS-B unit". This unit, which utilizes Pro-face's

newest PC architecture, is equipped with a wide range of standard-equipment

interfaces and is designed for use in a wide variety of industrial applications.

Prior to using the PS-B unit, be sure to read this manual thoroughly to familiarize

yourself with the unit's operation procedures and functions.

< Note >

Preface

PS-2000B Series User Manual

TABLE OF CONTENTS

PREFACE................................................................................................................... 1

ESSENTIALSAFETYPRECAUTIONS ................................................................ 5

DOCUMENTATION CONVENTIONS ................................................................. 8

PACKAGECONTENTS .......................................................................................... 9

UL/C-UL (CSA) APPLICATION NOTES ............................................................ 10

CE MARKING NOTES ......................................................................................... 11

CHAPTER 1 PS-B UNIT BASICS

1.1 Prior to Operating the PS-B Unit ................................................................1-1

1.2 PS-B System Design.....................................................................................1-3

1.3 PS-B Part Names and Features ..................................................................1-5

1.4 Interfaces......................................................................................................1-7

1.4.1 RS-232C Interface (COM1/COM2/COM3/COM4).........................1-7

1.4.2 RAS Interface (RAS) ..........................................................................1-8

1.4.3 DVI-DInterface ................................................................................1-10

1.5 PS-B External Views and Dimensions...................................................... 1-11

1.5.1 PS-B Unit..........................................................................................1-11

1.5.2 With CD-ROM/FDD Unit Attached .................................................1-12

1.5.3 With RS-232C/RS-485 Conversion Unit Attached ..........................1-13

1.5.4 WithMounting BracketAttached ......................................................1-14

CHAPTER 2 HARDWARE INSTALLATION

2.1 Installing Optional Units and Expansion Boards ......................................2-1

2.2 Installing the PS-B Unit................................................................................2-6

2.2.1 PS-BUnitInstallationCautions...........................................................2-6

2.2.2 InstallationProcedures .......................................................................2-8

2.3 Wiring...........................................................................................................2-10

2.3.1 Connecting the Power Cord.............................................................2-10

2.3.2 Power Supply Precautions.................................................................2-12

2.3.3 GroundingPrecautions .....................................................................2-13

2.3.4 PrecautionsWhen ConnectingI/OSignal Lines ................................2-14

PS-2000B Series User Manual 3

Preface

CHAPTER 3 SYSTEM SETUP

3.1 Setup Procedures ..........................................................................................3-1

3.2 System Parameters.......................................................................................3-2

3.2.1 Standard CMOS Features ..................................................................3-2

3.2.2 IDE HDD Auto-Detection...................................................................3-4

3.2.3 Advanced BIOS Features ...................................................................3-5

3.2.4 Advanced Chipset Features ................................................................3-8

3.2.5 IntegratedPeripherals........................................................................3-10

3.2.6 Power Management Setup ................................................................3-13

3.2.7 PnP/PCIConfigurations ....................................................................3-15

3.2.8 IRQ Resources..................................................................................3-16

3.2.9 DMA Resources................................................................................3-17

3.2.10 SystemMonitorSetup.......................................................................3-18

3.2.11 Frequency/VoltageControl................................................................3-20

3.2.12 LoadFail-Safe Defaults.....................................................................3-21

3.2.13 LoadOptimizedDefaults...................................................................3-21

3.2.14 Set Supervisor Password ..................................................................3-21

3.2.15 Set User Password............................................................................3-22

3.2.16 Save & Exit Setup .............................................................................3-22

3.2.17 ExitWithoutSaving ...........................................................................3-22

CHAPTER 4 SETTING UP YOUR PS-B UNIT

4.1 CD-ROM Contents.......................................................................................4-1

4.1.1 Software ..............................................................................................4-1

4.2 Setting up Your PS-B Unit............................................................................4-2

4.2.1 Setup Procedures ................................................................................4-2

4.2.2 Setting Up an HDD with Pre-installed OS ..........................................4-4

4.3 Installing Drivers ..........................................................................................4-6

4.4 Special Application Program Features .......................................................4-7

4.4.1 UninstallingUtilitySoftware.................................................................4-8

4.5 WhenUsingWindows®2000/Windows®XP .................................................4-8

4.5.1 Automatic System Log-on Setup.........................................................4-8

4.5.2 Uninterrupted Power Supply System (UPS) .......................................4-9

4.5.3 ChangingSystemSettings....................................................................4-9

4.5.4 NTFS File System Conversion..........................................................4-10

Preface

PS-2000B Series User Manual

CHAPTER 5 MONITORING FEATURES

5.1 RAS Features................................................................................................5-1

5.1.1 PS-B RAS Features ............................................................................5-1

5.1.2 RAS Feature Details............................................................................5-2

5.1.3 RAS Feature Overview .......................................................................5-5

5.2 System Monitor/RAS Features...................................................................5-6

5.2.1 Setup Procedures ................................................................................5-6

5.2.2 SystemMonitoringProperty Settings(PSB_Wps.exe) .......................5-7

5.2.3 SystemMonitoringOperation(PSB_Smon.exe).................................5-8

5.2.4 Error Messages .................................................................................5-10

5.2.5 ErrorDisplaysWhenUsing EventViewer.........................................5-11

5.3 Remote RAS................................................................................................5-13

5.3.1 SystemConfiguration........................................................................5-13

5.3.2 InstallationProcedures ......................................................................5-13

5.3.3 Setup and Preparation of the Remote RAS Feature..........................5-14

5.3.4 Read and Write of the System Monitor/RAS Feature .......................5-15

5.3.5 Restrictions........................................................................................5-18

5.4 Remote Shutdown Feature.........................................................................5-19

CHAPTER 6 MAINTENANCE AND INSPECTION

6.1 Cleaning the Fan Filter................................................................................6-1

6.2 Periodic Maintenance Points.......................................................................6-2

CHAPTER 7 SPECIFICATIONS

7.1 General Specifications .................................................................................7-1

7.1.1 ElectricalSpecifications.......................................................................7-1

7.1.2 EnvironmentalSpecifications ...............................................................7-2

7.1.3 ExternalSpecifications.........................................................................7-2

7.2 Performance Specifications .........................................................................7-3

7.2.1 PerformanceSpecifications .................................................................7-3

7.2.2 ExpansionSlots ...................................................................................7-4

7.2.3 Clock Accuracy...................................................................................7-4

APPENDICES

A.1 HardwareConfiguration.............................................................................. A-1

A.1.1 I/O Map .............................................................................................A-1

A.1.2 Memory Map .....................................................................................A-2

A.1.3 Interrupt Map .....................................................................................A-3

A.2 List of Optional Devices ............................................................................. A-4

PS-2000B Series User Manual 5

Preface

•To prevent an electric shock, be sure to connect the power

cord terminals to the PS-B unit's terminal block before con-

necting the power cord to the main power supply.

•Be sure to use only the specified voltage with the PS-B unit. A

fire or electrical shock may occur if voltages used that are

beyond the specified range.

•Be sure to turn the unit's power switch OFF before removing

the PS-B unit's cover. This is because the PS-B unit's internal

parts carry high voltages.

•Do not modify the PS-B unit in any way. Modifying the unit

can cause a fire or create an electrical hazard.

•Be sure to immediately turn the unit's power switch OFF, dis-

connect the power cord, and contact your local Pro-face dis-

tributor if metal particles, water or other types of liquids con-

tact any of the PS-B unit's internal parts.

•Be sure to read and understand Chapter 2 "Hardware Installa-

tion" thoroughly in order to select an appropriate installation

location for the PS-B unit.

WARNING

CAUTION

Essential Safety Precautions

This manual includes the following cautions concerning procedures that must be

followed to operate the PS-B unit correctly and safely. Prior to operating the PS-B,

be sure to read this manual and any related materials thoroughly to understand the

correct operation and functions of this unit.



Safety Icons

To explain the correct and safe usage of the PS-B unit, throughout this manual the

following icons are provided next to actions requiring special attention. These

icons indicate the following situations:

Indicates situations where severe bodily

injury, death or major equipment damage

may occur.

Indicates situations where slight bodily

injury or machine damage can occur.

WARNINGS

Preface

PS-2000B Series User Manual

•Be sure to turn the PS-B unit's power switch OFF Before ei-

ther connecting or disconnecting a board or interface con-

nector.

•Do not install the PS-B unit in areas containing flammable

gases.

•Do not use the PS-B unit with aircraft control devices, aero-

space equipment, central trunk data transmission (communi-

cation) devices, nuclear power control devices, or medical

life support equipment, due to these devices' inherent require-

ments of extremely high levels of safety and reliability.

•Be sure to design redundant and/or failsafe systems to en-

sure the proper degree of reliability and safety when using

the PS-B unit with transportation vehicles (trains, cars and

ships), disaster and crime prevention devices, various types

of safety equipment, non-life support related medical devices,

etc.

WARNINGS

PS-2000B Series User Manual 7

Preface

WARNINGS

CAUTIONS

• Do not expose the PS-B to, or operating the PS-B in direct

sunlight, high temperatures and humidity, and in areas that

have excessive dust and vibration.

• Do not use the PS-B unit in areas where sudden, extreme

changes in temperature can occur. These sudden changes

may cause condensation to form inside the unit, possibly

leading to an accident.

• Be sure the PS-B unit's air circulation vents are clear and

clean to prevent the PS-B unit from overheating, and keep

the PS-B unit's operation area well ventilated.

• Do not operate or store the PS-B unit near chemicals, or

where chemicals can come into contact with the unit.

When PS-B Unit's Hard Disk (HDD) data is lost:

• The Digital Electronics Corporation cannot be held respon-

sible or provide any compensation for damage(s) caused

by the loss of data stored in the PS-B unit's hard disk drive

(HDD). It is therefore strongly suggested that all important

data and software be backed up regularly to an external

data backup device.

• Please be aware that the Digital Electronics Corporation

bears no responsibility for any damages resulting from the

customer's application of this unit's hardware or software.

• Since the PS-B unit's hard disk drive (HDD) is a consum-

able item, i.e. it has a finite usage lifetime, be sure to back

up its data regularly and prepare a spare HDD unit.

• To prevent file data damage, be sure to shut down the PS-

B unit's OS before turning the power switch OFF.

• After turning OFF the PS-B unit's power, wait until the in-

ternal HDD stops spinning before turning on the power

again (approx. 5 seconds).

Preface

PS-2000B Series User Manual

Symbol Meaning

Indicates important information or procedures that must be followed

for correct and risk-free software/device operation.

Provides useful or important supplemental information.

*1 Indicates useful or important footnote information.

Refers to useful or important supplemental information.

1) , 2) Indicates steps in a procedure. Be sure to perform these steps in

the order given.

PS-B/PS-B Unit Abbreviation for the PS-2000B Series of Built-in Computers.

FP Abbreviation for FP-2500 and FP-2600TFT color touch panel display.

Documentation Conventions

The list below describes the documentation conventions used in this manual.

PS-2000B Series User Manual 9

Preface

Package Contents

The PS-B unit's packing box contains the items listed below. Please check to

confirm that all items shown below have been included.



PS-B Unit (1) 



Installation Brackets (2) (1 set) 



Power Cord (1)

Attachment Screws (4)



CD-ROM (PS2000B User Manual 



Installation Guide

and Driver CD) (1) (Japanese/English) (1)

• Be careful when handling the PS-B unit not to damage the built-in HDD.

• This cord is designed only for AC100V/AC115V use. Any other volt-

age will require a different cord.

• The CD-ROM included in this package contains a User

Manual, RAS-API Reference Manual, and PS-B Series Util-

ity and Driver files.

Chapter 4 - Setting Up Your PS-B unit

• When you order a PS-B unit built to your specifications, that

PS-B package should include each optional items' Installa-

tion Guide. Please use that guide to check the contents of

each optional items' package.

Installation

Guide



Expansion Board Stays (3) 



USB Cable Bracket (1)

Attachment Screws (6) Clamps (2)

Clamp Screws (2)

Indice

Altri manuali Pro-face Scrivania

Pro-face

Pro-face PS-3701A Manuale utente

Pro-face

Pro-face PL-5700 Series Manuale utente

Pro-face

Pro-face PL-6930-T41 Manuale utente

Pro-face

Pro-face PL-5910 Series Manuale utente

Manuali Scrivania popolari di altre marche

HP m9060n - Pavilion - Elite Scheda tecnica

Asus

Asus E210 Series Manuale utente

Dell

Dell Inspiron 600m Manuale utente

Dell

Dell Inspiron 3662 Manuale utente

TotalFlow

TotalFlow uFLO Manuale utente

HP Presario SV7000 - Desktop PC Manuale utente

HP ProDesk 400 G5 Manuale

Logitech

Logitech MK320 Manuale utente

Dell

Dell XPS 730 H2C Manuale utente

Sony

Sony Vaio Series Manuale utente

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Manuale utente

Alto

Alto MD 250 Manuale utente

Lenovo

Lenovo ThinkCentre Edge 72 Manuale

Lenovo

Lenovo ThinkStation D20 Manuale

Arbor Technology

Arbor Technology FPC-7800 Series Manuale utente

Sony

Sony VAIO VGX-TP1 Series Manuale utente

Asus

Asus Eee Box B204 Manuale utente

Dell

Dell Optiplex 9010 All In One Manuale utente