Pro-face GP77R Series Manuale di istruzioni

Device/PLC Connection

About the Device/PLC Connection Manuals

Prior to reading these manuals and setting up your device, be sure to read the

"Important: Prior to reading the Device/PLC Connection manual" information. Also,

be sure to download the "Preface for Trademark Rights, List of Units Supported, How

to Read Manuals and Documentation Conventions" PDF file. Furthermore, be sure

to keep all manual-related data in a safe, easy-to-find location.

Manuals

Device Net - Slave I/O

GP-PRO/PBIII for Windows Device/PLC Connection Manual

CPU Link I/F Cable Diagram Link I/F GP

PLC units compatible

withDeviceNet Device Net

MasterUnit Cable Diagram 1 Device Net I/F

Unit

(GP070-DN41) GP Series *1

The following table shows the system structure for connecting the GP to PLCs

supportingDeviceNet.

For the cable used, refer to <10.2.2 Cable Diagram> 



List of Cables

Dedicated to DeviceNet.

*1When using GP2000/GLC2000 series units, a bus conversion unit (PSL-

CONV00) is required.

Product Name Unit

GP-470 Series GP-470E

GP-570S

GP-570T

GP-57JS

GP-570VM

GP-571 Series GP-571T

GP-675S

GP-675T

GP-870 Series GP-870VM

GP-477R Series GP-477RE

GP-577RS

GP-577RT

GP-2500L

GP-2500S

GP-2500T

GP-2501S

GP-2501T

GP-2600 Series GP-2600T

GP-2601 Series GP-2601T

GLC2500 Series GLC2500T

GLC2600 Series GLC2600T

DeviceNetUnit

(GP070-DN41) *1

GP70 Series

GP77R Series

GP-570 Series

GP-675 Series

GP-577R Series

GP-2501 Series

GLC2000 Series

GP2000 Series GP-2500 Series

SeriesName

*1 The following table lists the GP units that can be connected and used with

DeviceNet.

1System Structure

Device Net - Slave I/O

GP-PRO/PBIII for Windows Device/PLC Connection Manual

• Only the LS Area's User Area (from LS20 to LS1999) is used for this

communication.

• The System Area (from LS0 to LS19) and Reading Area settings cannot be

used for PLC communication.

• GP will be used as a slave unit.

• Explicit Message Communication is not supported.

•The Contents in System Area are programless.

Note:



Slave I/O

Slave I/O is the feature that converts I/O data automatically between the PLC in-

stalledwiththemasterunitandGPunit.

Slave I/O uses a special link method that does not allow a user to access a PLC

directly.

WhenusingDeviceNetConnectiontheGPseriesunitperformslikeanI/Oterminal

(Remoteterminal).TheGP'sLSareawillbeusedasa device which inputs/outputs

data with the host (PLC).

The master (host PLC) unit Output area is allocated to GP's Input area, and the

master's Input area is allocated to GP's Output area. The LS area's Input area is

followed in sequence by the Output area. (See below)

GP LS Area Master (host unit)

InputArea

OutputArea

Device Net - Slave I/O

GP-PRO/PBIII for Windows Device/PLC Connection Manual

DeviceNetCable

SetScrews

12345

Pin No. Wire Cover

Color Comment

1 Black Power Supply (V-)

2Blue

Communication Data

[Lowside] (CAN_L)

3 None Shield

4White

Communication Data

[High side] (CAN_H)

5 Red PowerSupply (V+)

Afterallconnectorwiresareattachedtothe connector,connecttheconnectortothe

Device Net I/F Unit (5-wire type).

BesuretoconnectTerminatingResistors(121Ω1/4W)tobothsidesof the cable.

DeviceNet I/F unit attachment

screwconnector

GP PLC or PC (Terminal) or Tap

Important



List Device Net Cables

There are two types of cable, thick and thin, for the Device Net unit.

Besure to use only cables that meet the Device Net specifications. The following

two cables are recommended.

• Rockwell(AllenBradley) Thick type 1485C-PI-A***

• Rockwell(AllenBradley) Thin type 1485C-PI-C***

2 Cable Diagrams

Device Net - Slave I/O

GP-PRO/PBIII for Windows Device/PLC Connection Manual

3 Environment Setup

EntertheGP'scommunicationsettingsviatheSETUPOPERATIONSURROUND-

INGSmenu.

< GP Example screen >

Input / Output area Settings

cTouchtheINITIALIZEselection.

TheINITIALIZEmenuwill

appear.

ThefollowinglistsDigital'srecommendedGPsettings.

Baud Rate and Node Number Settings



GP Unit

Forsetting the baudrate and thenode number,use the Dip Switch (8 positions)on

therearsideoftheDeviceNetexpansionunit(Model:GP070-DN41).Thenormal

SIOcommunicationsetting cannot beused. Node numberisavailable from0to63

on the GP.

12345678

Baud Rate NodeNumber

NodeNo.D3D4D5D6D7D8

0 000000

1 000001

2 000010

: ::::::

61 111101

62 111110

63 111111

Baud Rate DIPSW1 DIPSW2

125K 0 0

250K 0 1

500K 1 0

Reserved 1 1

OFF

PLC Unit

ForPLCsettings,refertoeachcompany'sDeviceNetcommunicationunit'smanual.

Device Net - Slave I/O

GP-PRO/PBIII for Windows Device/PLC Connection Manual

The Initialize screen's SET UP I/O area's settings disabled.

dTouch the PLCSETUP

selection.The SETUP

OPERATIONSURROUNDINGS

menuwillappear.



Enter the following settings to begin I/O communication.

• In the DIO Start Address, enter a value from LS20-LS1999.

• In the Input Area Size, enter a value from 0-127 words.

Setthe wordarea size that is equalto theoutput area size of theDeviceNet master

unit.

< PLC Settings >

ForPLCsettings,refertoeachcompany'sDeviceNetcommunicationunit's manual.

The GP’s SYSTEM DATA AREA(LS0 to LS19) cannot be allocated.

• In the Output Area Size, enter a value from 0-127 words.

Set a word area size equal to the input area size of the DeviceNet master unit.

Device Net - Slave I/O

GP-PRO/PBIII for Windows Device/PLC Connection Manual

*2 Designate the DIO Start Address within the range shown below.

≤

DIO Start Address

≤

2000 - Input Area Size - Output Area Size

e.g: When Input Area Size =4, and Output Area Size =16,

the setting range of the DIO Start Address should be:

≤

DIO Start Address

≤

1980

PLC Series Input Area Size (word) Output Area Size (word)

Rockwell

SLC500 0 to 64 0 to 64

Rockwell

PLC-5 0 to 64 0 to 64

Rockwell

ControllLogix 5000 0 to 127 0 to 127

Rockwell

MicroLogix 1500 0 to 127 0 to 127

Omron

SYSMAC CS1 0 to 32 o to32

Omron

SYSMAC CJ 0 to 100 o to 100

Omron

SYSMAC CJ1M 0 to 100 o to 100

HITACHI

S10mini 0 to 127 0 to 127

HITACHI

S10V 0 to 127 0 to 127

YOKOGAWA

FA-M3 0 to 127 0 to 127

Word Address Remarks

Input Area Size (word) 0 to 127 *1

Output Area Size (word) 0 to 127 *1

DIO Start Address LS20 to LS1999 *2

L/H

*1 Though the Input /Output area size can be set from 0 to 127, the maximum I/O

size used per slave will differ depending on each company's master unit specifi-

cations.

The I/O size that each company supports is shown as below.

4 Supported Devices

Device Net - Slave I/O

GP-PRO/PBIII for Windows Device/PLC Connection Manual

Error Code Details Status

Unitis notproperly installed

UnitError

Communication Setting Error

Communication Line Error

Node No. is duplicated

14 No reply from the hardware

16 A communication error occurred

ThefollowinglistshowstheerrorcodesfortheDeviceNetconnection.Theseerror

codes will appear as "PLC COM.ERROR (02:**)" on the bottom left on the GP

screen. (** stands for an error code.)

5 Error Codes

Altri manuali per GP77R Series

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Pro-face Pannello touch

Pro-face

Pro-face FP-3710K Series Manuale utente

Pro-face

Pro-face GP3000 Series Istruzioni operative

Pro-face

Pro-face GP-2400 Series Manuale utente

Pro-face

Pro-face AGP3200-A1-D24 Manuale utente

Pro-face

Pro-face GP-4400 Series Manuale utente

Pro-face

Pro-face PS-3650A Series Manuale utente

Pro-face

Pro-face PL-6700 Series Manuale utente

Pro-face

Pro-face FP2600-T11 Manuale utente

Pro-face

Pro-face PS-A Series Manuale utente

Pro-face

Pro-face PS-4700 Series Manuale utente

Pro-face

Pro-face PL-6920 Series Manuale utente

Pro-face

Pro-face LogiTouch GLC150-BG41-RSFL-24V Manuale utente

Pro-face

Pro-face GP4000 SERIES Manuale utente

Pro-face

Pro-face GP-577R Series Manuale utente

Pro-face

Pro-face PS-4700 Series Manuale utente

Pro-face

Pro-face PFXGP4401TADR Manuale utente

Pro-face

Pro-face PS-3700A Manuale utente

Pro-face

Pro-face FP2600-T41 Manuale utente

Pro-face

Pro-face GP4104G1D Manuale utente

Pro-face

Pro-face PS-3710A Series Manuale utente

Pro-face

Pro-face GP377-LG Series Manuale elenco delle parti

Pro-face

Pro-face PS-G Manuale utente

Pro-face

Pro-face PL-7900 Series Manuale utente

Pro-face

Pro-face GP-2500 Series Manuale utente

Manuali Pannello touch popolari di altre marche

FlowLine

FlowLine Data loop Manuale utente

ALPEX

ALPEX AEx-8 P Series Manuale utente

Ltech

Ltech E5S Manuale utente

Harman

Harman AMX MODERO S MSD-701-L2 Manuale utente

Acnodes

Acnodes PC 1150 Manuale utente

AIS

AIS IP10IA99 series Manuale utente

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manuale utente

YASKAWA

YASKAWA TP 610C Manuale utente

B&R

B&R Power Panel C Series Manuale utente

Beijer Electronics

Beijer Electronics X2 control Manuale utente

AXIOMTEK

AXIOMTEK GOT321W-521 Manuale utente

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manuale utente

Qomo

Qomo QIT1386 Manuale utente

DFI

DFI KS104-CD Manuale utente

AMX

AMX AXP-PPC Guida

Sartorius

Sartorius X3 PR 5410 Manuale utente

AMX

AMX Modero X Series Manuale utente

Advantech

Advantech TPC-30 Series Manuale utente