Pro-Form 831.280182 Manuale utente

Model No. 831.280182

Serial No.

Serial Number Decal

EXERCISE

EO u I PM ENT

HELPLINE!

1-800-736-6879

SEARS, ROEBUCK AND CO.,

HOFFMAN ESTATES, IL 60179

CAUTION

Read all precautions and instruc-

tions in this manual before using

this equipment. Keep this manual

for future reference.

USER'S MANUAL

Visit our website at

www, proform,com

new products, prizes,

fitness tips, and much more!

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS ............................................................. 2

BEFORE YOU BEGIN ................................................................... 3

ASSEMBLY ........................................................................... 4

HOW TO USE THE RECUMBENT CYCLE .................................................... 9

RECUMBENT CYCLE EXERCISE GUIDELINES .............................................. 20

WEIGHT BENCH EXERCISE GUIDELINES .................................................. 20

MAINTENANCE AND TROUBLESHOOTING ................................................. 21

PART LIST ........................................................................... 22

EXPLODED DRAWING ................................................................. 23

HOW TO ORDER REPLACEMENT PARTS ........................................... Back Cover

FULL 90 DAY WARRANTY ....................................................... Back Cover

IMPORTANT PRECAUTIONS

_WARNING: To reduce the risk of serious injury, read the following important precau-

tions before using the crosstrainer.

1. Read all instructions in this manual before

using the crosstrainer, that could become caught on the crosstrain-

er, Always wear shoes for foot protection,

2. It is the responsibility of the owner to ensure 9. Before using the weight bench, always

that all users of the crosstrainer are ade-

quately informed of all precautions.

3. The crosstrainer is intended for home use

only. Do not use the crosstrainer in a com-

mercial, rental, or institutional setting.

4. Place the crosstrainer on a level surface,

adjust the seat to the farthest forward posi-

tion. Never sit on the backrest or the head-

rest; doing so could cause the crosstrainer

to tip, resulting in injury.

10, Keep your back straight when using the

crosstrainer; do not arch your back,

with a mat beneath it to protect the floor or 11. The crosstrainer includes three pairs of

carpet. Keep the crosstrainer indoors, away hand weights. Do not use other weights with

from moisture and dust. the crosstrainer.

5. Inspect and properly tighten all parts regu- 12, When you stop pedaling, allow the pedals to

lady. Replace any worn parts immediately. ............ a stop.

6. Keep children under age 12 and pets away 13. The pulse sensor is not a medical device.

from the crosstrainer at all times. Various factors may affect the accuracy of

heart rate readings. The pulse sensor is

7, The crosstrainer should not be used by per- intended only as an exercise aid in determin-

sons weighing more than 250 pounds, ing heart rate trends in general.

8, Wear appropriate exercise clothing when

using the crosstrainer; do not wear clothing 14. If you feel pain or dizziness while exercising,

stop immediately and begin cooling down.

WARNING: Before beginning this or any exercise program, consult your physician.

This is especially important for persons over the age of 35 or persons with pre-existing health prob-

lems. Read all instructions before using. SEARS assumes no responsibility for personal injury or

property damage sustained by or through the use of this product.

BEFORE YOU BEGIN

Congratulations for selecting the new PROFORM _

970 crosstrainer. The unique PROFORM ®970 com-

bines a comfortable recumbent cycle with a conve-

nient weight bench to let you enjoy both aerobic exer-

cise and strength training exercise in the convenience

of your home.

For your benefit, read this manual carefully before

you use the crosstrainer, tf you have questions after

reading the manual, please call our toll-free

HELPLINE at 1-800-736-6879, Monday through

Saturday, 7 a.m. until 7 p.m. Central Time (excluding

holidays). To help us assist you, please note the prod-

uct model number and serial number before calling.

The model number is 831.280182. The serial number

can be found on a decal attached to the crosstrainer

(see the front cover of this manual for the location of

the decal).

Before reading further, please familiarize yourself with

the parts that are labeled in the drawing below.

Headrest

Water Bottle Holder

Bookrack

Console

CAUTION Decal 1

Backrest

Seat

CAUTION

Decal 3

Handgrip Pulse Sensor

Adjustment Knob

Seat Handle

Adjustment Pin

CAUTION

Decal 2 Leveling Foot

Pedal/Strap

Adjustment Knob

Hand Weig

Note: The 1

decals are

not shown at

actual size.

CAUTION: The decals shown below are found on the cross-

trainer in the locations indicated above. If a decal is missing or

illegible, call our toll-free HELPLINE at 1-800-736-6879 to order a

free replacement decal. Apply the decal in the location shown.

Do not sit on seat-

back or headrest.

The machine could

tip over,causing injury.

liThe bench should bell

II used only with the li

tweights provided. J

CAUTION

Always position

the seat adjustment

in the full forward

setting before using

the bench.

ASSEMBLY

Assembly requires two persons. Place all parts of the crosstrainer in a cleared area and remove the packing

materials. Do not dispose of the packing materials until assembly is completed. In addition to the included

allen wrenches, assembly requires a phillips screwdriver _T_, an adjustable wrench

and a rubber mallet _-L- _L: -t_ "

As you assemble the crosstrainer, use the drawings below to identify the small parts used in assembly. The

number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on page

22. The second number refers to the quantity used in assembly. Note: Some small parts may have been pre-

assembled for shipping. If a part is not in the parts bag, check to see if it has been pre-assembled.

M6 Flat

Washer(71)-3 MIO Zinc Split

Washer (85)-2 MIO Black Split

Washer(77)-3 MIO Nylon Black

Locknut(63)-2 M10 Zinc Nylon

Locknut (66)-2

M4 x 16mm M6 x 16mm

Screw (73)-1 Screw (64)-5 M6 x 50mm Screw

(69)-3 M6 x 25.4mm Button

Screw (79)-1

M10 x 27mm Button

Screw (76)-3 MIO x 45mm Button

Screw (74)-2 M10 x 52mm Button Bolt (68)-2

MIO x 112mm Carriage Bolt (65)-2

1/2" Nylon

Locknut (52)-1

1. While another person lifts the front of the Frame (1)

slightly, attach the Front Stabilizer (2) to the Frame

with two M10 x 112mm Carriage Bolts (65) and two

M10 Nylon Black Locknuts (63). Make sure that the

Front Stabilizer is turned so the Wheels (30) are

not touching the floor.

2. Orient the Frame Rail (3) as shown, with the hexago-

nal holes in the indicated position. Insert the end of the

Frame Rail into the Rear Stabilizer Covers (7, 8) as

shown. Attach the Rear Stabilizer Covers with two M10

x 45mm Button Screws (74).

3. Locate the Knob (not shown) on the Seat Carriage (4).

Turn the Knob counterclockwise two or three turns to

loosen it. Next, pull the Knob, slide the Seat Carriage

onto the Frame Rail (3), and then release the Knob.

Make sure that the Seat Carriage is oriented as shown.

Move the Seat Carriage back and forth slightly until

it locks into position. Then, tighten the Knob.

Slide the Frame Rail (3) onto the indicated round tubes

on the Frame (1). Attach the Frame Rail with two M10

x 52mm Button Bolts (68), two M10 Zinc Split Washers

(85), and two M10 Zinc Nylon Locknuts (66).

Set the six Hand Weights (not shown) on the Rear

Stabilizer Covers (7, 8) as shown on page 3.

4. With the help of a second person, slide the Backrest

Frame (5) onto the top of the Seat Carriage (4). Next,

slide the bracket on the Seat Frame (6) over the

rounded brackets on the Backrest Frame. Align the

indicated holes in the Seat Frame, the Backrest

Frame, and the Seat Carriage, and insert the 1/2" x

70mm Bolt (51) into the holes. Then, tighten the 1/2"

Nylon Locknut (52) onto the Bolt.

Pivot the Backrest Frame (5) up until it is nearly vertical.

Insert the Adjustment Pin (29) into the lowest hole in

the rounded brackets on the Backrest Frame and

through the corresponding hole in the Seat Carriage (4).

130

Hexagonal

Holes

368

Alig

Knob

5. AttachtheSeat(12)totheSeatFrame(6)withthree

M6x 16mmScrews(64).

6. AttachtheBackrest(10)totheBackrestFrame(5)

withtwoM6x 16mmScrews(64),anM6x50mm

Screw(69),andanM6FlatWasher(71).

AttachtheHeadrest(11)totheBackrestFrame(5)

withtwoM6x50mmScrews(69)andtwoM6Flat

Washers(71).

7. WhileanotherpersonholdstheUpright(13)inthe

positionshown,connecttheUpperWireHarness(35)

totheLowerWireHarness(36).Carefullypullthe

upperendof theUpperWireHarnessto remove

anyslackfromtheWireHarnesses.

TurntheKnob(notshown)ontherightsideofthe

Frame(1)counterclockwisetwoorthreeturnstoloosen

it.Next,pulltheKnob,inserttheUpright(13)intothe

Frame,andthenreleasetheKnob.MovetheUpright

upanddownslightlyuntilit locksintoposition.Be

carefulto avoidpinchingtheWireHarnesses(35,

36).TightentheindicatedM6x25.4mmButtonScrew

(79)intotheslotinthesideoftheUpright.

8. ConnectthewireharnessontheHandgripPulse

Sensor(15)totheindicatedwireharnessonthe

Console(16).Insertbothwireharnessesintotheopen-

inginthebottomoftheConsole.Then,insertthemetal

tubeontheHandgripPulseSensorintotheopeningin

thebottomoftheConsole.Becarefulnotto pinchthe

wireharnesses.

Refertotheinsetdrawing.TightenanM4x16mmScrew

(73)intotheindicatedbracketontheConsole(16)and

intothemetaltubeontheHandgripPulseSensor(15).

SnapthebookrackontotheConsole(16)intheindicated

location. 73

12 ...............

Slot

Bookrack

Metal

Tube

9. The Console (16) requires four "D" batteries (not

included); alkaline batteries are recommended. Press

the tab on the battery cover, and lift off the battery

cover. Insert four batteries into the battery compart-

ment. Make sure that the batteries are oriented as

shown by the diagram inside the battery compart-

ment. Reattach the battery cover.

10. While another person holds the Console (16) in the

position shown, connect the wire harness on the

Console to the Upper Wire Harness (35). Insert the

excess wire harness into the Upright (13).

Attach the Console (16) to the Upright (13) with three

M10 x 27mm Button Screws (76) and three M10

Black Split Washers (77). Be careful to avoid pinch-

ing the wire harnesses.

11. Identify the Left Pedal (24), which is marked with an

"L." Using an adjustable wrench, firmly tighten the

Left Pedal counterclockwise into the Left Crank Arm

(42). Tighten the Right Pedal (not shown) clockwise

into the Right Crank Arm (not shown) in the same

way. Important: Tighten both Pedals as firmly as

possible. After using the crosstrainer for one

week, retighten the Pedals. For the best perfor-

mance, the Pedals must be kept properly tightened.

Adjust the Left Pedal Strap (25) to the desired position

and press the end of the Strap onto the tab on the Left

Pedal (24). Adjust the Right Pedal Strap (not shown)

in the same way.

Battery /__ Tab

Cover __

Batteries,

Wi_ Harness

12. Make sure that all parts of the crosstrainer are properly tightened. Note: Some hardware may be left

over after assembly is completed. To protect the floor or carpet from damage, place a mat under the

crosstrainer.

INSTALLINGTHERECEIVERFORTHEOPTIONALCHESTPULSESENSOR

Ifyoupurchasetheoptionalchestpulsesensor(refertopage18),followthestepsbelowtoinstallthereceiver

andtheshortjumperwireincludedwiththechestpulsesensor.

1.Removethetwoshortscrewsandthetwolongscrews

fromthebackoftheConsole(16).Liftoffthefrontof

theConsole. 116\

Short

Screws

Long

Here

2. Plugtheshortjumperwire(A)intotheindicatedjackon

theConsole(16).Connecttheotherendoftheshort

jumperwiretothewireonthereceiver(B).Note:Any

otherwiresincludedwiththechestpulsesensorcanbe

discarded.

Next,peelthepaperofftheadhesivepadontheback

ofthereceiver(B).Orientthereceiverasshown,and

pressitontotheConsole(16)intheindicatedlocation.

Refertostep1above.Reattachthefrontofthe

Console(16)withtheshortandlongscrews.Make

sure that no wires are pinched.

B \1

HOW TO USE THE RECUMBENT CYCLE

The crosstrainer features a recumbent cycle for aerobic exercise, and a convenient weight bench for strength

training exercise. To use the recumbent cycle, refer to pages 9 to 19. To use the weight bench, refer to page 20.

HOW TO ADJUST THE BACKREST HOW TO ADJUST THE UPRIGHT

When the recum-

bent cycle is used,

the backrest should

be in the upright

position. To adjust

the backrest, first

pull out the adjust-

ment pin. Raise the

backrest until it is

nearly vertical, and

then insert the

adjustment pin into

the indicated hole

in the rounded

brackets and the

corresponding hole

in the seat carriage.

HOW TO ADJUST THE SEAT

The upright can be

adjusted to the

height that is the

most comfortable for

you. To adjust the

upright, first turn the

indicated adjust-

ment knob counter-

clockwise two or

three turns to

loosen it (if the knob

Knob

Upright---__

J /-

is not loosened enough, it may scratch the upright).

Next, pull the knob, slide the upright to the desired

height, and then release the knob. Move the upright

up and down slightly until it locks into position.

Then, turn the knob clockwise until it is tight. IMPOR-

TANT: After you adjust the upright, make sure that

your knees will not touch the handgrip pulse sen-

sor when you pedal.

For effective exer-

cise, the seat

should be in the

proper position. As

you pedal, there

should be a slight

bend in your knees

when the pedals

are in the farthest

position. To adjust

the seat, first turn

the indicated Seat

adjustment knob Carriage

counterclockwise

two or three turns

to loosen it (if the knob is not loosened enough, it may

scratch the rail). Next, pull the knob, slide the seat car-

riage to the desired position, and then release the

knob. Move the seat carriage back and forth slightly

until it locks into position. Then, turn the knob clock-

wise until it is tight.

HOW TO ADJUST THE PEDAL STRAPS

To adjust the pedal

straps, first pull the

ends of the straps

off the tabs on the

pedals. Adjust the

straps to the

desired positions,

and then press the

ends of the straps

back onto the tabs.

HOW TO USE THE HAND WEIGHTS

The included hand weights can be used for a variety

of strength training exercises with the weight bench

(refer to page 20). In addition, the hand weights can

be used with the recumbent cycle. As you pedal, press

the hand weights over your head, raise the hand

weights out to your sides until your hands are level

with your shoulders, or do arm curls with the hand

weights.

press ON/RESET

_WARNING :TOreduce

risk of serious injury, read and

understand the user's manual,

all instructions, and warnings

before using this equipment.

Keep children away,

iGH

B C

Scan

Time

IECOACH

F .........

SILENT MAGNETIC RESISTANCE

j.- I

i sma tP

RESISTANCE & PACE PROGRAMS

FEATURES OF THE CONSOLE

The advanced console offers a selection of features

designed to make your workouts more enjoyable and

effective. When the manual mode of the console is

selected, the resistance of the crosstrainer can be

adjusted with a touch of a button. As you exercise, the

console will provide continuous exercise feedback.

You can even measure your heart rate using the built-

in handgrip pulse sensor. (For information about an

optional chest pulse sensor, refer to page 18.)

The console also offers eight Smart workout programs.

Each program automatically changes the resistance of

the crosstrainer and prompts you to increase or

decrease your pace as it guides you through an effec-

tive workout.

The console also features new iFIT.com interactive

technology. IFIT.com technology is like having a per-

sonal trainer right in your home. Using a stereo audio

cable (available at electronics stores), you can connect

the crosstrainer to your home stereo, portable stereo,

or computer and play special iFIT.com CD programs

(CD's are available separately). IFIT.com CD programs

automatically control the resistance of the crosstrainer

and prompt you to vary your pace as a personal train-

er coaches you through every step of your workout.

High-energy music provides added motivation. Each

CD features two programs designed by certified per-

sonal trainers.

In addition, you can connect the crosstrainer to your

VCR and TV and play iFIT.com video programs (video-

cassettes are available separately). Video programs

offer the same benefits as iFIT.com CD programs, but

add the excitement of working out with a class and an

instructor.

With the crosstrainer connected to your computer, you

can also go to our new Web site at www.iFIT.com and

access audio programs and video programs directly

from the internet.

To purchase iFIT.com CDs and videocassettes, call

toll-free 1-800-735-0768.

Questo manuale è adatto per i seguenti modelli

Altri manuali Pro-Form Ellittica

Pro-Form

Pro-Form 675 Manuale utente

Pro-Form

Pro-Form PFEL03010 Manuale utente

Pro-Form

Pro-Form 485 P Elliptical Manuale utente

Pro-Form

Pro-Form 380 Razor Elliptical Manuale del sistema

Pro-Form

Pro-Form 310 E Elliptical Guida utente

Pro-Form

Pro-Form PFEL51016.1 Manuale utente

Pro-Form

Pro-Form Comfort Stride Manuale utente

Pro-Form

Pro-Form PFEL6905.1 Manuale utente

Pro-Form

Pro-Form 831.285732 Manuale utente

Pro-Form

Pro-Form 831.23744.1 Manuale utente

Pro-Form

Pro-Form 720 Zle Elliptical Manuale utente

Pro-Form

Pro-Form 831.23744.0 Manuale utente

Pro-Form

Pro-Form PFEVEL34020 Manuale utente

Pro-Form

Pro-Form PFEVEL80717.0 Manuale utente

Pro-Form

Pro-Form HYBRID TRAINER Manuale utente

Pro-Form

Pro-Form ENDURANCE 520 E Manuale utente

Pro-Form

Pro-Form 405 CE READ DRIVE Manuale utente

Pro-Form

Pro-Form 420 Zle Elliptical Guida all'installazione

Pro-Form

Pro-Form 831.285872 Manuale utente

Pro-Form

Pro-Form PFEL89720-INT.0 Manuale utente

Pro-Form

Pro-Form 530e Manuale utente

Pro-Form

Pro-Form 764hr Bike Guida rapida

Pro-Form

Pro-Form 465S Manuale operativo e di manutenzione

Pro-Form

Pro-Form RAZOR 400 ES Manuale utente

Manuali Ellittica popolari di altre marche

Weslo

Weslo Momentum 4.0 Elliptical Manuale operativo e di manutenzione

Progear Fitness

Progear Fitness Air elliptical pro 1307 Manuale utente

Torque Fitness

Torque Fitness XPLLP Manuale utente

Octane Fitness

Octane Fitness PRO3700C Manuale utente

Xterra

Xterra FS5.8e Manuale utente

Bodyguard

Bodyguard E-40 Manuale utente

Bonn Germany

Bonn Germany Concept 2.2 Manuale utente

Precor

Precor Resolute RSL 620 Manuale utente

NordicTrack

NordicTrack E 9.2 Elliptical Manuale utente

Vision Fitness

Vision Fitness X6600iNetTV Manuale utente

Matrix

Matrix MX-A5x Manuale utente

SportsArt Fitness

SportsArt Fitness ECO-NATURAL Elite E874 Manuale utente

Sears

Sears FREE SPIRIT C249 30737 0 Manuale utente

True

True FS-64 Manuale utente

Sport-thieme

Sport-thieme ST 310 Manuale utente

VIRTUFIT

VIRTUFIT CTR 1.1 Manuale utente

Kettler

Kettler GIRO C 1 Manuale utente

CIRCLE FITNESS

CIRCLE FITNESS E7 Manuale utente