CAUTION BEFORE USING
Due to shipment and/or handling air can be trapped in the hydraulic system, which can interfere
with the jacks lifting. To release air from the hydraulic system:
• Open release valve by turning the jack handle counterclockwise.
• Remove the oil filler plug from the cylinder.
• Rapidly pump jack handle through several full strokes.
• Replace the oil filler plug into the cylinder.
WARNING:
• USE ONLY ON HARD LEVEL SURFACES
• DO NOT GET UNDER A VEHICLE THAT IS ONLY
SUPPORT BY A TROLLY JACK
• USE SUPPORT STANDS
- 2 -
SAFE INSTRUCTIONS
INSTRUCTIONS
RECOMMENDATION FOR SAFE USAGE OF THE JACK
1. The hydraulic trolley jack should be used on a hard level surface and be free to roll during
lifting and lowering.
2. The unlifted wheels of the vehicle should be chocked.
3. The load should be centrally located on the head cap.
4. No person should remain in a vehicle that is being lifted.
5. The hydraulic trolley jack should be used for lifting and lowering only; the raised vehicle
should be supported on vehicle support stands.
6. No person should get bodily under a vehicle that is supported by a hydraulic trolley jack.
7. The vehicle manufacturer owner's manual should be consulted prior to the lifting of the
vehicle.
8. Make sure that lift point is stable and properly centered on jack saddle.
9. Vehicle should be clear of all passengers. Transmission should be in gear (or park for
automation transmission) and the emergency brake should be engaged.
10. Familiarize yourself thoroughly with this owner manual before operation to prevent damage
to jack and property, or personal injury.
This hydraulic trolley jack is designed to be used with a 100mm diameter head cap, and a handle
length of 1070mm length.
1. Before Each Use
Visual inspection should be made before each use of the garage service jack for abnormal
conditions such as cracked welds, leaks and damaged, loose, or missing parts.
2. After Each Use
Garage jack should be inspected immediately if the lift is believed to have been subjected to
an abnormal load or shock. It is recommended that inspection be made by manufacturer’s or
supplier’s authorized repair facility.
3. Annual Inspection
Annual inspection of the garage jack is recommended and shall be made by the
manufacturer’s or supplier’s nominated repair facility to ensure that your garage jack is in
optimum condition.
