PRO Light EclDisplay UNFC Manuale utente

USER MANUAL

REV.01-02/21 English version

EclDisplay DATFC

EclDisplay UNFC

40W RGB+WW LED gallery light

Thank you for choosing PROLIGHTS

Please note that every PROLIGHTS product has been designed in Italy to meet quality and performance requirements

for professionals and designed and manufactured for the use and application as shown in this document.

Any other use, if not expressly indicated, could compromise the good condition/operation of the product and/or be

a source of danger.

This product is meant for professional use. Therefore, commercial use of this equipment is subject to the respectively

applicable national accident prevention rules and regulations.

Features, specications and appearance are subject to change without notice. Music & Lights S.r.l. and all afliated

companies disclaim liability for any injury, damage, direct or indirect loss, consequential or economic loss or any other

loss occasioned by the use of, inability to use or reliance on the information contained in this document.

Product user manual can be downloaded from the website www.prolights.it , or can be inquired to the ofcial

PROLIGHTS distributors of your territory (https://www.prolights.it/sales_network.html).

Scanning the below QR Code, you will access the download area of the product page, where you can nd a broad

set of always updated technical documentation: specications, user manual, technical drawings, photometrics,

personalities, xture rmware updates.

The PROLIGHTS Logo, PROLIGHTS names and all other trademark in this document pertaining to PROLIGHTS services

or PROLIGHTS product are trademarks OWNED or licensed by Music & Lights S.r.l., its afliates, and subsidiaries.

04026 - Minturno (LT) ITALY

Visit the download area

of the product page

ECLDISPLAYUNFC ECLDISPLAYDATFC

PROLIGHTS - EclDisplay UNFC / EclDisplay DATFC 01

INDEX

SAFETY INFORMATION 02

1 - PACKAGING 05

PACKAGE CONTENT..................................................................................................... 05

2 - OPTIONAL ACCESSORIES 05

DEDICATED ACCESSORIES........................................................................................... 05

NORDIC ALUMINUM TRACK........................................................................................ 05

3 - TECHNICAL DRAWING 06

4 - TILT RANGE 08

5 - INSTALLATION 09

MOUNTING.................................................................................................................... 09

6 - CONNECTION TO THE MAINS SUPPLY 10

7 - START UP 13

CONNECT AND DISCONNECT POWER FROM THE PRODUCT.................................. 13

8 - PRODUCT OVERVIEW 13

9 - CONTROL PRIORITY ORDER 14

10 - RDM FUNCTIONS 15

11 - ERROR MESSAGES 19

12 - DMX CHARTS 20

13 - ACCESSORIES INSTALLATION 23

OPTIC (CODES ECLDISPWASHL1530 / ECLDISPWASHL2550 / ECLDISPPRZL2040 -

OPTIONAL)..................................................................................................................... 23

BARNDOOR AND FILTER FRAME (CODE ECLDISPBDNFFB - OPTIONAL) .................. 25

ANTI-GLARE LOUVRE (CODE ECLDISPLOUVRE - OPTIONAL)..................................... 26

GOBO HOLDER (CODE ECLDISPGOBOHIND - OPTIONAL)........................................ 27

HALF SNOOT, FULL SNOOT (CODES ECLDISPHSNOOT, ECLDISPFSNOOT -

OPTIONAL)..................................................................................................................... 28

CEILING ADAPTER KIT (CODES ECLDISPCEILKIT, ECLDISPCEILFLG - OPTIONAL) .... 29

14 - MAINTENANCE 32

MAINTENANCE AND CLEANING THE PRODUCT........................................................ 32

VISUAL CHECK OF PRODUCT HOUSING ..................................................................... 32

TROUBLESHOOTING..................................................................................................... 33

PROLIGHTS - EclDisplay UNFC / EclDisplay DATFC02

SAFETY INFORMATION

WARNING!

• Please read carefully the instruction reported in this section before installing, power-

ing, operating or servicing the product and observe the indications also for its future

handling.

This unit is not for household use, only professional applications.

Connection to mains supply

• The Connection to the mains supply must be carried out by a qualied electrical

installer.

• Use only AC supplies 100-240V 50-60 Hz, the xture must be electrically connected

to ground (earth).

• Select the cable cross section in according with the maximum current draw of the

product and the possible number of products connected at the same power line.

• The AC mains power distribution circuit must be equipped with magnetic+residual

current circuit breaker protection.

• Do not connect it to a dimmer system; doing so may damage the product.

Protection and Warning against electrical shock

• Do not remove any cover from the product, always disconnect the product from AC

power before servicing.

• Ensure that the xture is electrically connected to ground (earth). And use only a

source of AC power that complies with local building and electrical codes and has

both overload and ground-fault (earth-fault) protection.

• Before using the xture, check that all power distribution equipment and cables are

in perfect condition and rated for the current requirements of all connected devices.

• Isolate the xture from power immediately if the power plug or any seal, cover, ca-

ble, or other components are damaged, defective, deformed or showing signs of

overheating.

• Do not reapply power until repairs have been completed.

• Refer any service operation not described in this manual to PROLIGHTS Service team

or an authorized PROLIGHTS service center.

Installation

• Make sure that all visible parts of the product are in good visible condition before its

use or installation.

• Make sure the point of anchorage is stable before positioning the projector.

• When suspending the xture above ground level, secure it against failure of primary

attachments by attaching a safety cable that is approved as a safety attachment for

the weight of the xture to the attachment point on the main frame of the product. ln

case the safety cable, enter in action, it needs to be replaced with a new one.

• Install the product only in well ventilated places.

• For non temporary installations, ensure that the xture is securely fastened to a load-

bearing surface with suitable corrosionresistant hardware.

• For a temporary installation with clamps, ensure that the quarter-turn fastener and/or

screws are turned fully, and secured with a suitable safety cable.

0,2 m Minimum distance of illuminated objects

• The projector needs to be positioned so that the objects hit by the beam of light are

at least 0.2 meters (0.65 ft) from the lens of the projector.

PROLIGHTS - EclDisplay UNFC / EclDisplay DATFC 03

T 45°C

Max operating ambient temperature (Ta)

• Do not operate the xture if the ambient temperature (Ta) exceeds 45 °C (113 °F).

-10°

Minimum operating ambient temperature (Ta)

• Do not operate the xture if the ambient temperature (Ta) is below -10 °C (14 °F).

Protection from burns and re

• The exterior of the xture becomes hot during use. Avoid contact by persons and

materials.

• Ensure that there is free and unobstructed airow around the xture.

• Keep ammable materials well away from the xture

• Do not expose the front glass to sunlight or any other strong light source from any an-

gle. Lenses can focus the sun’s rays inside the xture, creating a potential re hazard.

• Do not attempt to bypass thermostatic switches or fuses.

Indoor use

• This product is designed for indoor and dry environments.

• Do not use in wet location and do not expose the xture to rain or moisture.

• Never use the xture in places subject to vibrations or bumps.

• Make certain that no inammable liquids, water or metal objects enter the xture.

• Excessive dust, smoke uid, and particle build up degrades performance, causes

overheating and will damage the xture.

• Damages caused by inadequate cleaning or maintenance are not covered by the

product warranty.

65°

Temperature of the external surface

• The surface of the xture can reach up to 65 °C (149 °F) during operation. Avoid

contact with people and materials.

Photobiological safety

• This device emits potentially dangerous optical radiation and is identied in the cat-

egory of Risk Group 1 according to EN 62471.

Maintenance

• Warning! Disconnect the xture from AC mains power and allow to cool for at least

10 minutes before handling.

• Only technicians who are authorized by PROLIGHTS or Authorised service partners

are permitted to open the xture.

• Users may carry out external cleaning, following the warnings and instructions pro-

vided, but any service operation not described in this manual must be referred to a

qualied service technician.

• Important! Excessive dust, smoke uid, and particle build up degrades performance,

causes overheating and will damage the xture. Damages caused by inadequate

cleaning or maintenance is not covered by the product warranty.

Do not stare at the operating light source

• Do not look directly at the LED source during operation. It can be harmful to the eyes

and skin.

• During Installation, operation and maintenance, be prepared for the xture to light

and move suddenly when connected to power.

PROLIGHTS - EclDisplay UNFC / EclDisplay DATFC04

Disposal

• This product is supplied in compliance with European Directive 2012/19/EU – Waste

Electrical and Electronic Equipment

• (WEEE). To preserve the environment please dispose/ recycle this product at the end

of its life according to the local regulation.

The products to which this manual refers comply with:

• 2014/35/EU - Safety of electrical equipment supplied at low voltage (LVD);

• 2014/30/EU - Electromagnetic Compatibility (EMC);

• 2011/65/EU - Restriction of the use of certain hazardous substances (RoHS).

PROLIGHTS - EclDisplay UNFC / EclDisplay DATFC 05

1 - PACKAGING

PACKAGE CONTENT

• 1x ECLDISPLAYUNFC or 1x ECLDISPLAYDATFC;

• User Manual.

2 - OPTIONAL ACCESSORIES

DEDICATED ACCESSORIES

• ECLDISPWASHL1530B/W: zoomable Wash Lens 15-30° for EclDisplay, black/white housing;

• ECLDISPWASHL2550B/W: zoomable Wash Lens 25-50° for EclDisplay, black/white housing;

• ECLDISPPRZL2040B/W: zoomable Prole Lens 20-40°, with 4 framing shutters, for EclDisplay, black/white housing;

• ECLDISPCEILKIT: ceiling adapter kit for EclDisplay, black/white ange;

• ECLDISPHSNOOTB/W: half snoot for EclDisplay, black/white housing;

• ECLDISPFSNOOTB/W: full snoot for EclDisplay, black/white housing;

• ECLDISPLOUVREB/W: anti-glare louvre for EclDisplay, black/white housing;

• ECLDISPBDNFFB/W: barndoor and lter frame (compatible with Wash Lenses) for EclDisplay, black/white housing;

• ECLDISPGOBOHINDB/W: gobo holder for EclDisplay with manual adjustable index position system, black/white housing;

• ECLDISPCEILFLGB/W: ange to complete the EclDisplay ceiling adapter kit, black/white;

• PLCPW93075: power PVC cable H05VV-F 3G0,75;

• PLCDX53D5: 120ohm DMX cable, 2 twisted poles, external sheath with reduced diameter;

• PLCPD7501P14D: power & DMX 120 Ohm;

• C6002: slim aluminium clamp, 200 kg loading, 48-51 mm tubes, M10 bolt;

• RSR0630A/B: steel security cable for hanging bodies, inox steel shackle, L=60 cm, silver/black;

• UPBOX1U: rmware uploader kit, USB IN, 3p XLR DMX OUT.

NORDIC ALUMINUM TRACK

NOTE: the nal terms "2" and "3" in the codes indicate the corresponding color variant in black and white respectively.

• NAXTSA682/3: global Pulse 3-Circuit MULTI Adapter, 10A 100N Slot connection, black/white;

• NAGAC6002/3: global Pulse DALI 3-Circuit Adapters, 10A 100N Slot connection, black/white;

• NAXTSA57129: global Pulse Rotating Nipples 3-Circuit Adapters, M10, H 12MM;

• NAXTSA55129: global Pulse Rotating Nipples 3-Circuit Adapters, M13, H 12mm, D 9mm;

• NAGAM109: global Pulse Nut M10 for NAXTSA57129;

• NAGAM139: global Pulse Nut M13 for NAXTSA55129;

• NAXTSC61002/3: global Pulse XTSC Lighting Track, 3 circuit DALI, 1000mm, black/white;

• NAXTSC62002/3: global Pulse XTSC Lighting Track, 3 circuit DALI, 2000mm, black/white;

• NAXTSC63002/3: global Pulse XTSC Lighting Track, 3 circuit DALI, 3000mm, black/white;

• NAXTSC64002/3: global Pulse XTSC Lighting Track, 3 circuit DALI, 4000mm, black/white;

• NAXTSC6112/3: global Pulse XTS Connector 3-CCT DALI end feed, earth right, black/white;

• NAXTSC6122/3: global Pulse XTS Connector 3-CCT DALI end feed, earth left, black/white;

• NAXTSC6142/3: global Pulse XTS Connector 3-CCT DALI middle feed, black/white;

• NAXTSC6232/3: global Pulse XTS Connector 3-CCT DALI exible corner connector, black/white;

• NAXTSNC6342/3: global Pulse XTSN Connector 3-CCT DALI L connector, earth right, black/white;

• NAXTSNC6352/3: global Pulse XTSN Connector 3-CCT DALI L connector, earth left, black/white;

• NAXTSNC6362/3: global Pulse XTSN Connector 3-CCT DALI T connector, earth right/right, black/white;

• NAXTSNC6372/3: global Pulse XTSN Connector 3-CCT DALI T connector, earth left/left, black/white;

• NAXTSNC6382/3: global Pulse XTSN Connector 3-CCT DALI X connector, black/white;

• NAXTSNC6392/3: global Pulse XTSN Connector 3-CCT DALI T connector, earth right/left, black/white;

• NAXTSNC6402/3: global Pulse XTSN Connector 3-CCT DALI T connector, earth left/right, black/white;

• NAXTS412/3: global Pulse XTS Connector 3-CCT DALI END cap, black/white;

• NASPW12SK215M: global Pulse Track clip wire suspension set 1.5m, 150N, black;

• NASPW12SK25M: global Pulse Track clip wire suspension set 5m, 150N, black;

• NASPW12SK315M: global Pulse Track clip wire suspension set 1.5m, 150N, white;

• NASPW12SK35M: global Pulse Track clip wire suspension set 5m, 150N, white;

• NASKB122/3: global Pulse Track Mounting Clamp for Rod and Wire, 200N, black/white.

PROLIGHTS - EclDisplay UNFC / EclDisplay DATFC06

3 - TECHNICAL DRAWING

200 mm [7.9 in]

124 mm [4.9 in]

228 mm [9.0 in]148 mm [5.8 in]

270 mm [10.6 in]

Weight: 2.01 kg - 4.43 lbs ECLDISPLAYUNFC with ECLDISPWASHL1530

145 mm [5.7 in]

200 mm [7.9 in]

219 mm [8.6 in]

124 mm [4.9 in]

260 mm [10.3 in]

Weight: 2.00 kg - 4.41 lbs ECLDISPLAYUNFC with ECLDISPWASHL2550

229 mm [9.0 in]

184 mm [7.2 in] 303 mm [11.9 in]

160 mm [6.3 in]

345 mm [13.6 in]

Weight: 2.18 kg - 4.80 lbs ECLDISPLAYUNFC with ECLDISPPRZL2040

Dimensions are in mm / in - Fig. 01

PROLIGHTS - EclDisplay UNFC / EclDisplay DATFC 07

138 mm [5.4 in]

200 mm [7.9 in]

228 mm [9.0 in]

105 mm [4.1 in]

270 mm [10.6 in]

Weight: 1.78 kg - 3.92 lbs ECLDISPLAYDATFC with ECLDISPWASHL1530

138 mm [5.4 in]

200 mm [7.9 in]

218 mm [8.6 in]

105 mm [4.1 in]

260 mm [10.3 in]

Weight: 1.77 kg - 3.90 lbs ECLDISPLAYDATFC with ECLDISPWASHL2550

177 mm [7.0 in]

229 mm [9.0 in]

303 mm [11.9 in]

160 mm [6.3 in]

345 mm [13.6 in]

Weight: 1.95 kg - 4.29 lbs ECLDISPLAYDATFC with ECLDISPPRZL2040

Dimensions are in mm / in - Fig. 02

PROLIGHTS - EclDisplay UNFC / EclDisplay DATFC08

4 - TILT RANGE

135°

Fig. 03

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali PRO Light Riflettore

PRO Light

PRO Light PAR64 Manuale utente

PRO Light

PRO Light PAR56 Manuale utente

Manuali Riflettore popolari di altre marche

Guangzhou Yinhe Lighting&Sound Equipment Factory

Guangzhou Yinhe Lighting&Sound Equipment Factory NE-204 Manuale utente

LIVARNO home

LIVARNO home 375304 2101 Istruzioni originali

Cameo

Cameo CLQS40WW Manuale utente

Leviton

Leviton Ellipsoid 5/50 Manuale utente

Monacor

Monacor img Stage Line PARL-56PDX/CR Manuale utente

Vector

Vector SL3AKV Manuale utente

Quantum

Quantum Q262 Manuale operativo

Philips

Philips Vari-lite VL3015LT Manuale utente

EUROSPOT

EUROSPOT C51 Manuale utente

DTS

DTS MINI BRICK ARC Manuale utente

Federal Signal Corporation

Federal Signal Corporation VISIBEAM II Manuale

ACME

ACME LED-MS350B Manuale utente

EuroLite

EuroLite Akku flat light 1 Manuale utente

Commercial Electric

Commercial Electric SPTM-1401 Manuale utente

Vision & Control

Vision & Control SLB-500-W5K7-P-SL Manuale utente

Teknik

Teknik FLEXI Manuale utente

Craftsman

Craftsman CMXLSB10 Manuale utente

EuroLite

EuroLite LED SLS-144 UV Floor Spot Manuale utente