2
Thank you for purchasing product. The SS-956 SS-968 LCD Smart Hot Air Rework
Station has been designed to meet high quality standards .Please properly use and take care of
your product for prolonging service life. Please store the manual in a safe, easily accessible place
for future reference.
SAFETY INSTRUCTIONS
WARNING
Warnings and cautions are placed at critical points in this manual to direct the
operator's attention to significant items. They are defined as follows:
WARNING: Failure to comply with a WARNING may result in serious injury or
death.
CAUTION: Failure to comply with a CAUTION may result in injury to the operator, or
damage to the items involved. Two examples are given below.
NOTE: A NOTE indicates a procedure or point that is important to the process being
described.
EXAMPLE: AN EXAMPLE is given to demonstrate a particular procedure, point or
process.
Be sure to comply with following WARNINGS and CAUTIONS for your safety.
WARNING
When the power is ON, the temperature of the hot air and the nozzle ranges from
indoor temperature to 480°C ( 896°F).
To avoid injury to personnel or damage to items in the work area, observe the
following:
Do not direct the hot air toward personnel or touch the metal parts near the nozzle.
Do not use the product near combustible gases or flammable materials.
Advise those in the work area that the unit can reach very high temperatures and
should be considered potentially dangerous.
Turn the power OFF when no longer using the Pro’sKit SS-956/SS-968 or when
leaving it unattended.
Before replacing parts or storing the unit, allow the unit to cool and then turn the
power OFF.
To prevent accidents and failures, be sure to take the following precautions:
Do not strike the hand piece against hard surfaces or otherwise subject it to
physical shock.
Be sure the unit is grounded. Always connect power to a grounded receptacle.
Do not disassemble the pump.
Do not modify the unit.
Use only genuine Pro’sKit replacement parts.
Do not wet the unit or use the unit with wet hands.
Remove power cord by holding the plug –not the wires.
Make sure the work area is well ventilated.
The SS-956/SS-968 is not intended for use by children or infirm persons
without supervision.
Children should be supervised to ensure that they do not play with the
SS-956/SS-968.
