Pro user PSI Series Manuale utente

PSI-SERIES

PURE SINE WAVE INVERTER WWW.PRO-USER.COM

OPERATING MANUAL P.2

BEDIENUNGSANLEITUNG P.22

GEBRUIKSAANWĲZING P.42

MODE D’EMPLOI P.62

PURE SINE WAVE INVERTER

SINUS WECHSELRICHTER

ZUIVERE SINUS OMVORMER

CONVERTISSEUR DE TENSION PUR SINUS

Rea this manual before using this pro uct.

Rea this manual before using this pro uct. Rea this manual before using this pro uct.

Rea this manual before using this pro uct.

Failure to o so can result in serious injury.

Failure to o so can result in serious injury.Failure to o so can result in serious injury.

Failure to o so can result in serious injury.

Intro uction P.3

Important safety instructions P.3

General instructions P.6

Package contents P.6

Technical escription P.7

Remote control P.10

Dipswitch settings (Hybri only) P.11

ECO/UPS function P.11

Installation & operation P.12

Wiring scheme P.13

Troubleshooting P.15

Technical speciﬁcations P.19

Maintenance P.21

Warranty P.21

CONTENTS

INTRODUCTION

The pure sine wave inverters are a member of the family of a vance mobile power inverters

manufacture by Pro-User Electronics. Your Pro-User Electronics pure sine wave inverter

enables you to generate a pure sine wave 230V AC 50Hz voltage from a 12V DC battery

wherever your travels take you. As a bonus we built-in 1 USB-Port for powering or charging

e.g. your sat nav, cell phone, tablet or any other USB evice. Because of the high quality pure

sine wave voltage an the excellent overloa capabilities, even sensitive electronics will

work ﬂawlessly.

The wire remote control enables you to monitor an control your inverter in a convenient

way.

We have taken numerous measures in quality control to ensure that your pro uct arrives in

top con ition an will perform to your satisfaction.

Please carefully rea an follow the safety an operating instructions. Not following

Please carefully rea an follow the safety an operating instructions. Not following Please carefully rea an follow the safety an operating instructions. Not following

Please carefully rea an follow the safety an operating instructions. Not following

these instructions may result in a serious acci ent, inclu ing amage property, serious

these instructions may result in a serious acci ent, inclu ing amage property, serious these instructions may result in a serious acci ent, inclu ing amage property, serious

these instructions may result in a serious acci ent, inclu ing amage property, serious

or even fatal injuries. If the evice is passe on to another person, this manual must

or even fatal injuries. If the evice is passe on to another person, this manual must or even fatal injuries. If the evice is passe on to another person, this manual must

or even fatal injuries. If the evice is passe on to another person, this manual must

also be han e over with it.

also be han e over with it.also be han e over with it.

also be han e over with it.

CAUTION: Please rea this instruction manual carefully before installing an

CAUTION: Please rea this instruction manual carefully before installing an CAUTION: Please rea this instruction manual carefully before installing an

CAUTION: Please rea this instruction manual carefully before installing an

starting up the evice. Do not operate the inverter unless you have fully rea

starting up the evice. Do not operate the inverter unless you have fully rea starting up the evice. Do not operate the inverter unless you have fully rea

starting up the evice. Do not operate the inverter unless you have fully rea

an un erstoo all the provi e information. If you are not conﬁ ent working

an un erstoo all the provi e information. If you are not conﬁ ent working an un erstoo all the provi e information. If you are not conﬁ ent working

an un erstoo all the provi e information. If you are not conﬁ ent working

with 12V DC voltage or are unsure of what you are oing, consi er to seek for

with 12V DC voltage or are unsure of what you are oing, consi er to seek for with 12V DC voltage or are unsure of what you are oing, consi er to seek for

with 12V DC voltage or are unsure of what you are oing, consi er to seek for

help by a professional installation service or your vehicle´s manufacturer.

help by a professional installation service or your vehicle´s manufacturer. help by a professional installation service or your vehicle´s manufacturer.

help by a professional installation service or your vehicle´s manufacturer.

Failure to observe these instructions may cause an electrical shock, fatal or

Failure to observe these instructions may cause an electrical shock, fatal or Failure to observe these instructions may cause an electrical shock, fatal or

Failure to observe these instructions may cause an electrical shock, fatal or

serious injury, material amage or impair the function of the inverter.

serious injury, material amage or impair the function of the inverter.serious injury, material amage or impair the function of the inverter.

serious injury, material amage or impair the function of the inverter.

Pro-User Electronics accepts no liability for irect or in irect amage cause by faulty

assembly or connection, a usage of amage or altere pro ucts, a usage for purposes other

than escribe an especially cause by failure to follow these instructions.

General:

• Electrical evices are not toys. Keep the pro uct away from chil ren.

• Only use the pro uct as inten e an for purposes escribe in the manual.

• After opening the package, examine all parts for visible amage. If you have foun any

amage, please contact the company you purchase this unit from.

• Always isconnect the power supply (inclu ing the connection to the battery an an optional

solar panel) when working on the evice.

IMPORTANT SAFETY INSTRUCTIONS

• Use only approve accessories (especially all cables) or parts fully consistent with the

requirements. The installer is responsible for ensuring that the correct cable an fuse sizes

are use .

• The surface temperature can reach up to 65°C. Power-o an stop using the evice

imme iately, if the unit is smoking or is showing any abnormal behaviour.

• This appliance is not inten e for use by persons (inclu ing chil ren) with re uce physical,

sensory or mental capabilities, or lack of experience an knowle ge, unless they are

supervise or have been instructe on how to use the appliance by a person responsible for

their safety. Chil ren shoul be supervise to ensure that they o not play with the

appliance.

• Installing the evice, maintenance an repair work may only be carrie out by qualiﬁe

person who are familiar with the risks involve , the relevant regulations an with the

gui elines an safety precautions to be applie .

• Do not isassemble the inverter, the internal circuit contains hazar ous voltages.

Attempting to service the unit yourself may result in electric shock or ﬁre an will voi the

unit warranty.

• Always keep metal objects or other materials that can short circuit the terminals of the

battery or the inverter securely away. A resulting spark or short-circuit may not only amage

the evice, but also cause an explosion an potentially pro uce a current high enough to

wel a ring or the like to metal. Remove personal metal items such as rings, bracelets,

necklaces an watches when working on the evice or the battery.

• Operate the inverter only, if all cables an the housing are un amage an all connections

are tight an clean. Loose or irty connections coul result in overheating, electrical sparks

an ﬁre.

• Do not connect AC output terminals of the inverter to an incoming AC source (or the gri ).

• Do not connect DC input terminals of the inverter to an incoming AC source.

• Never use the inverter on vehicles where the positive terminal of the battery is connecte to

the chassis.

• Never connect cables in reverse polarity or short-circuit connecte cables. This may blow

internal fuses an may amage the inverter permanently.

• A fuse shoul be provi e at a istance of max. 30 cm from the battery´s positive terminal.

Failure to o so, may cause amage to the cabling or battery if a fault (e.g. over-current or

short circuit) occurs. Only use high quality copper cable an keep the cable length short.

• Do not operate appliances that may fee AC main power back into the inverter. This might

amage the inverter.

• Ensure the evice is stan ing ﬁrmly. The evice must be set up an fastene in such a way

that it cannot tip over or fall own.

• Never connect evices that have a higher power requirement than the peak output power of

the inverter. Note that some evices may require more starting current than the type plate of

the evice in icates.

Working with Batteries

Working with BatteriesWorking with Batteries

Working with Batteries

• Batteries can store large amounts of energy an improper han ling can be angerous. Never

connect to a battery with an unsuite voltage or other unsuitable or amage batteries.

• Keep chil ren away from batteries an aci .

• Avoi getting electrolyte on your skin or clothes. It is aci ic an can cause burns. If battery

aci contacts skin or clothing, wash imme iately with water. Baking so a neutralizes lea

aci battery electrolyte. If electrolyte gets into your eyes, imme iately ﬂoo your eyes with

running col water for at least 20 minutes an get me ical attention imme iately. Eye

protection is therefore recommen e .

• Always keep metal objects or other materials that can short circuit the terminals of the

battery or the inverter securely away.

• Power-o the evice before making or breaking the connections to the battery.

• Observe technical instructions of the seller or the manufacturer of your battery.

• Check if all connections are tight an clean. Loose or irty connections coul result in

overheating, electrical sparks an ﬁre. Use terminal grease where require .

• Never smoke or allow a spark or ﬂame in vicinity of the battery.

• Never try to charge a amage or frozen battery.

• Do not place the evice irectly on top of the battery or vice versa or on a surface

constructe from combustible material.

• Rea your car´s owner's manual. Some vehicle manufacturers may have special requirements

before charging or ischarging the vehicle´s battery (e.g. fuses that have to be remove or

certain security eman s).

Environment

EnvironmentEnvironment

Environment

• Only use the pro uct in environments from 0°C ~ 45°C.

• Do not operate the pro uct in amp, wet or usty environments: Never expose the inverter

to rain or snow. Doing so may result in amage to the inverter or other equipment installe in

the system or result in electric shock or ﬁre. Do not operate the unit in explosive

atmospheres, such as in the presence of ﬂammable liqui s, gases or ust. Do not put

batteries, or anything that shoul be protecte from sparks aroun the inverter. Doing so

may result in ﬁre or explosion.

• To avoi heat accumulation, o not cover the evice. To prevent overheating , ensure that air

inlets an ventilation is not obstructe . Do not expose the evice to a heat source (such as

irect sunlight or heating). Avoi a itional heating of the evice in this way.

Electrical Cables

Electrical CablesElectrical Cables

Electrical Cables

• If cables have to be fe through metal holes or other walls with sharp e ges, use ucts or

cable bushings to prevent amage.

• Do not lay cables which are loose or bent next to electrically con uctive material (metal).

• Do not pull on the cables.

• Avoi to lay 230 V AC mains cable an 12 V DC cables in the same uct.

• Prevent all cables from being steppe on, trippe over, or being amage by e.g. sharp e ges

or hot surfaces.

GENERAL INSTRUCTIONS

Inten e use

Inten e useInten e use

Inten e use

The Pro-User Electronics pure sine wave inverter converts a 12V irect current voltage

(e.g. a battery or another 12V source that can eliver the require current) into 200-240V

50Hz AC pure sine wave voltage. The built-in USB-port is inten e to power or charge 5V

USB evices (the maximum current elivery has to be kept in min ). The wire remote control

enables the user to monitor an control the inverter in a convenient way.

Packaging materials

Packaging materialsPackaging materials

Packaging materials

To avoi anger of suocation, o not let chil ren play with foils or other packaging

materials. Remove all protective coverings before putting the evice in operation.

Storage

StorageStorage

Storage

When not in use, store the inverter in a ry environment. Store the evice in a safe place out

of the reach of chil ren. Protect the unit from irect sunlight, heat an moisture.

• 1x Pro-User Electronics pure sine wave inverter

• 1x Remote control (600/1000/1500/2000/3000W)

• 1x Remote control wiring (600/1000/1500/2000/3000W)

• 1x Remote control surface mounting frame (600/1000/1500/2000/3000W)

• 1x Battery wiring set

• 1x 230V connection cable (1000/1500/2000W)

• 1x Operating manual

PACKAGE CONTENTS

TECHNICAL DESCRIPTION

A) Incoming 230V AC connection (1000W / 1500W / 2000W)

B) Output 230V AC socket

C) ECO mo e in ication le (1000W / 1500W / 2000W / 3000W)

D) Power switch

E) Remote control wiring connection

F) UPS in ication le (1000W / 1500W / 2000W / 3000W)

G) Inverter function in ication le

H) Fault in ication le

I) AC incoming in ication le

J) USB output

K) BY-Pass in ication le

TECHNICAL DESCRIPTION

A B

A) Positive battery terminal ( re / + )

B) Negative battery terminal ( black / - )

C) Cooling vents

TECHNICAL DESCRIPTION 3000W & HYBRID PSI-SERIES

B C

A) Solar panel input (MC4 Hybri only)

B) Output 230V AC connections

C) Input 230V AC connection

D) Battery setup ipswitches (Hybri only)

E) ECO mo e in ication le

F) Power switch

G) Remote control wiring connection

H) UPS in ication le

I) Solar charge function in ication le (Hybri only)

J) Inverter function in ication le

K) 230V AC charge function in ication le (Hybri only)

L) Fault in ication le

M) AC incoming in ication le

N) USB output

O) BY-Pass in ication le

REMOTE CONTROL DISPLAY INVERTER MODE

A) Battery In ication

B) Battery voltage

C) AC output running

D) Power consumption

E) AC output voltage

F) Inverter operating

REMOTE CONTROL DISPLAY TRANSFERSWITCH MODE (1000W / 1500W /2000W /3000W)

A) Battery In ication

B) Battery voltage

C) AC output running

D) Power consumption

E) AC output voltage

F) Mains connecte (transferswitch/By-pass)

Questo manuale è adatto per i seguenti modelli

Indice

Lingue:

Altri manuali pro user Invertitore

pro user

pro user PSI600 Manuale utente

pro user

pro user PSI200 Manuale utente

pro user

pro user INV150 Manuale utente

pro user

pro user PSI600 Manuale utente

Manuali Invertitore popolari di altre marche

Fourgroup

Fourgroup Easy Manuale utente

Velleman

Velleman PI300M Manuale utente

Sungrow

Sungrow SG350HX-US Manuale utente

WilTec

WilTec 61897 Manuale utente

SMA

SMA SUNNY BOY STORAGE 2.5 Manuale utente

Simplicity

Simplicity LANDLORD 316 Manuale utente

Santak

Santak SMAX 3000 Manuale utente

ATON

ATON RA.Store-3 Manuale utente

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Manuale utente

Tektronix

Tektronix CFG250 Manuale utente

Champion

Champion 200989 Manuale utente

Vanner

Vanner 20-500 Series Manuale utente

GE GEP Manuale utente

Astrel Group

Astrel Group Power Reducer Guida rapida

MULTIQUIP

MULTIQUIP GDP-5H Guida

GoWISE

GoWISE PS1007 Manuale utente

Promate

Promate PM13500D ES Manuale utente

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Manuale utente

pro user PSI Series Manuale utente

Manuali Invertitore popolari di altre marche