Pro FPP14206 Guida alla risoluzione dei problemi
50051987-003 A
User & Installation Guide FPP14206
DIGITAL TIMER
-DAY-CHANNEL
This product must be correctly installed and congured to work properly. If you are not
experienced in electrical wiring, we recommend professional installation to avoid possible
personal injury or equipment damage.
DISCONNECT ELECTRIC POWER BEFORE INSTALLATION: Can cause electrical shock or
equipment damage.
DISPOSAL AND RECYCLING: Waste electrical products should not be disposed of with
household waste. Please recycle where these facilities exist. Check with your local authority
or retailer for recycling advice.
3
About your Digital Timer
Features................................................... 4
Quick reference to controls...................... 5
Date/time settings .................................... 6
Operation and programming
Operating modes ..................................... 7
Cost-saving programme schedules ......... 8
To adjust programme schedules.............. 9
Special functions
Temporary schedule overrides .............. 10
Extra Hour ............................................. 11
Holiday mode......................................... 12
Advanced features................................. 13
Installation and setup
System installation................................. 14
Wall bracket installation .................... 15-16
System wiring ................................... 17-20
Installer setup ................................... 21-25
Appendix
Alternate programme schedules............ 25
In case of difficulty ................................. 26
Contents
User Manual
4
The Digital Timer is designed to work with your existing thermostat, heating and hot water. It can work
automatically, or you can adjust it manually to maintain a comfortable indoor environment while minimising
energy use and costs associated with heating both your home and the hot water you require.
Features
•Energy-saving design: Automatically activates or shuts down your heating and hot water up to six
times per day to t your lifestyle while saving energy costs. Each day of the week can be programmed
separately (see pages 8-12).
•One-touch comfort control: Allows you to override programmed settings at any time by turning your
heating or hot water on or off — or by extending an “on” period by up to three hours.
•Holiday button: Turns off your heating and hot water for up to 99 days while you are away, then resumes
normal operation when you return (see page 12).
•Seasonal clock change: Automatically adjusts the clock for seasonal changes in the spring and autumn
to adjust for standard time or daylight savings time.
•Lifetime memory: Saves your customised settings indenitely, even if the mains power supply fails.
About your Digital Timer
5
RUN
—+
—+
12:34
PM
mon tue wed thu fri sat sun
30/12/2021
cont
once
auto
off
cont
once
auto
off
on 1
off 1
on 2
off 2
on 3
off 3
Quick reference
Press to extend
hot water heating
(see page 11)
Line of
text area
Current
time
Current
day
Operating modes
(see page 7)
Daily programme
periods (see page 8)
Press to override hot
water (see page 10)
Light is on when hot
water heater is on
Press to programme
next day (see
page 9)
Press to copy a daily
programme schedule
(see page 9)
“Holiday” button (see
page 12)
Press to extend heating
time (see page 11)
Press to override
heating programme (see
page 10)
Light is on when heating
system is on
Slider (set to RUN
except during
programming)
Mode buttons
(see page 7)
Press to change time
or advance in menus
Press to save changes and
advance to next step
Remove cover to
use controls
Operation and Programming
6
Date/time settings
To change the date or time, set the slider to DAY/TIME.
Use the +or -buttons to set the correct day, then press the OK
button. Follow the same procedure to set month, year and time.
Date and time are set at the factory and should not need to be
changed unless you turn off the automatic daylight savings feature
(see pages 21-23).
RUN
TIP: While setting the time, press and hold the +/- buttons to change
the clock time more rapidly.
30
12
mon tue wed thu fri sat sun
SET THE DAY
SET THE MONTH
Set to DAY/TIME
Press +or -to change
Press OK to save
31
IS DAY OK?
7
Operating modes
Press the MODE button repeatedly to select an operating mode.You
can set the Hot Water and Heating modes separately, by pressing the
appropriate button as shown at left. Both work the same way:
Cont: Heating or Hot Water remains on continuously.
Auto: In this mode the Digital Timer follows a daily schedule for the
Hot Water or Heating, turning each on and off at preset times during
the day (see page 8).
Once: In this mode the Heating or Hot Water is turned on at the
rst programmed “On” time of the day, and remains on until the last
programmed “Off” time (see page 8).
Off: Heating or Hot Water remains off at all times.
HOT WATER HEATING
12:34
PM
mon tue wed thu fri sat sun
30/12/2021
cont
once
auto
off
cont
once
auto
off
on 1
off 1
on 2
off 2
on 3
off 3
Press to
change
hot water
operating
mode
Press to
change
heating
operating
mode
Operation and Programming
8
Cost-saving programme schedules
Monday-Friday ON 1 [off 1] ON 2 [off 2] ON 3 [off 3]
Heating 6:30am 8:30am 12:00pm 1:00pm 4:30pm 10:30pm
Hot water 6:30am 8:30am 12:00pm 1:00pm 4:30pm 10:30pm
Saturday-Sunday ON 1 [off 1] ON 2 [off 2] ON 3 [off 3]
Heating 6:30am 9:30am 12:00pm 1:00pm 4:30pm 11:00pm
Hot water 6:30am 9:30am 12:00pm 1:00pm 4:30pm 11:00pm
The Digital Timer is preset at the factory to turn off your home heating and hot water when they’re less likely
to be needed. The preset schedules are shown below. To change them, see pages 9-12. (See also two
alternate schedules on page 25).
To run this schedule (as shown below, or as you’ve modied it), leave the MODE buttons set to Auto. You can
make temporary adjustments at any time (without changing the schedule) by pressing the EXTRA HOUR or
OVERRIDE buttons (see pages 10-11).
Default
on/off times
(Schedule A)
TIP: To review your schedule quickly, move the slider to Hot Water or Heating, then press
the OK button repeatedly to see each on/off time period.
RUN
9
To adjust programme schedules
The Hot Water and Heating schedules must be programmed
independently, but the procedure is the same for both.
1 Move slider to HOT WATER or HEATING, then press +or -to
adjust the “On” time for Period 1 as shown at left.
2 Press OK to save, then press +or -to adjust the “Off” time for
Period 1. Repeat for all time periods.
3 After all Monday time periods are set, press the NEXT DAY button
to adjust settings for Tuesday. Repeat for all other days.
To stop programming at any time, move slider to RUN.
SHORTCUT: While programming, press the COPY DAY button to copy
settings for the current day and apply them to other days. For example,
you can apply Monday settings to other days of the week. After copying,
press the NEXT DAY button to select a target day, then press OK.
RUN
Set to HOT WATER
or HEATING
6:30
AM
6:40
AM
8:30
AM
mon tue wed thu fri sat sun
mon tue wed thu fri sat sun
mon tue wed thu fri sat sun
SET ON-TIME 1
ON-TIME 1 OK?
SET OFF-TIME 1
on 1
off 1
on 2
off 2
on 3
off 3
Press +or -to change time
Press OK
TIP: To delete an unwanted time period, set identical times for the
“On” and “Off” periods.
Special Functions
10
Temporary schedule overrides
The OVERRIDE buttons work like a simple “on/off” switch. If you
press the button when the system is on, it will turn off. If off, it
will turn on. The Hot Water and Heating override buttons work
independently. Neither affects the other system.
These buttons work only when the MODE is set to Auto or Once
(see page 7).
This change is temporary. It does not change the daily programme
schedule, which will resume at the next programmed “On” or “Off”
time period.
NOTE: See also temporary overrides for extra hours or holidays (see
pages 11-12).
Press to turn system on or off
Green light shows system
status (on or off)
12:34
PM
mon tue wed thu fri sat sun
SYSTEM OVERRIDE
cont
once
auto
off
cont
once
auto
off
on 1
off 1
on 2
off 2
on 3
off 3
Indice
Altri manuali Pro Timer
