PROAIM Mitchell-Euro Manuale utente
1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Assembly Manual
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Mul Adapter Kit (Mitchell-Euro/Elemac-Bowl) (P-MLAK-01)
1 x Mitchell plate 1 x Adapter Plate
1 x Bowl adapter
Size: 100 mm
1 x Euro Flange
1 x Mitchell
Lock
1x Euro Adapter
Clamping
knob
4 x Distance Rods
1 x Spanner (Size:13)
2 x L-Type Allen Key
(Size:5mm & 6mm)
1 x Bowl adapter
Size: 150 mm
Allen Bolts
(8 x 50mm=3pc)
(6 x 25mm=12pc) Allen Bolts
(6 x 12mm=6pc) Allen Bolts
2
Mul Adapter Kit Setup
• Attach the Euro Flange by matching it with the
thread of the Adapter Plate and then insert
the bolt.
• Secure all the bolts by tightening them using
the Allen Key.
• Attach the Distance Rods by matching them
with the side thread on the Adapter Plate and
then secure them using the Allen Key.
• Attach all the Distance Rods on the Adapter
Plate, as shown in the image. Place the
100mm bowl adapter by matching it with the
threads of the Rods.
Hard Case
Bowl-Euro
3
• After placing the 100mm bowl adapter on the
rods, then match the thread and insert the
bolts.
• Tighten the bolt using the Allen Key, so that
bowl euro can be attached properly.
Mitchell-Euro
• Attach the distance rods at equal distance
from each other, as shown in the image.
NOTE: You can aach rods on the mulple
threads of the Adapter Plate according to your
setup requirement.
• Attach the Distance Rods on the Adapter Plate
at equal distance from each other according
to your requirement and then secure them
with the help of the bolt.
• Place the Mitchell Plate by matching it with
the thread of the Distance Rods and then
insert the bolt by matching it with the thread
hole.
• Properly tighten the bolt of the Mitchell Plate
using the Allen Key.
4
Euro Flange Detach
• Attach the Mitchell Lock by matching it with
the threads from the bottom part of the
Adapter Plate.
• Loosen the bolts to remove the Euro Flange
from the Adapter Plate and then remove
them using the Allen Key, as shown in the
image.
• Insert the bolt after matching the Mitchell
Lock with the threads of the Adapter Plate
and then properly tighten it with the Allen
Key.
• Then Mitchell-Mitchell plate is ready to use.
• Attach the Mitchell Lock by matching it with
the bolt thread of the Adapter Plate.
Mitchell-Euro Adapter
• Insert the bolts from the back side of the
Adapter Plate, and then properly tighten
them using the Allen Key.
Mitchell-Bowl
5
• Aer placing the Bowl Adapter on the Rods,
insert the bolt by matching it with the Rod
thread.
• Remove the castle nut from the Mitchell Lock,
as shown in the image.
• Properly ghten the all bolts using the Allen
Key. then Michell-bowl adapter is ready to
use.
• Place the bowl adapter (150mm) plate on the
rods.
• Aer inserng the bolts, ghten them
properly using the Allen Key.
• Place the Euro Adapter on the Adapter Plate
by matching it with the thread of the Plate
and then insert the bolts.
Mitchell-Bowl Adapter
6
• Properly secure the Fluid Head (150mm bowl)
(Not Included) using the Fluid Head knob.
• Aer properly mounng the Fluid Head
(150mm bowl) (Not Included), remove the
Plate by pulling the provided knob.
• Aach the Plate to the boom part of the
Camera (Not Included) and then mount the
Camera (Not Included) by pulling the knob of
the Fluid Head.
• Mount the Bowl-Mitchell on the tripod stand.
(Not Included).
• Secure the Bowl-Mitchell using the castle nut
from the boom of the Tripod Stand
(Not Included).
• Mount 150mm uid head (Not Included) &
insert it into the bowl through the screw.
7
NOTE: It with Camera, Dolly, Bazooka, Tripod,
Slider, Jib & more, as it is compable with
almost every operaon.
• Then properly secure the Euro Mitchell with
the help of the provided ratchet knob.
• Mount the Fluid Head (Not Included) onto the
Euro Mitchell.
• Properly secure the Fluid Head (Not Included)
using the castle ring.
• The Camera (Not Included) has been properly
aached to the Fluid head.
• Mount the Euro Mitchell on the Bazooka
(Not Included).
Euro-Mitchell Setup
8
• Mount the Camera (Not Included) by sliding it
onto the Fluid Head, as shown in the image.
• Remove the Plate by pushing the knob of the
Fluid Head (Not Included).
• Aach the plate of the Fluid Head
(Not Included) to the boom of the Camera
(Not Included) and then properly ghten it
using the screw driver.
• Tighten the knob of the Fluid Head by pulling
it to secure the Camera (Not Included).
NOTE: It is a full-edged kit that includes all necessary adapters and tools, created with a goal to be
adaptable with every mount and with as few items as possible. Quickly adapt from Bowl to Euro, Bowl to
Mitchell, Euro to Bowl, Euro to Mitchell, Mitchell to Bowl, Mitchell to Euro, truly one soluon for every
situaon.
9
YOUR PROAIM MULTI ADAPTER KIT (MITCHELL-EURO/ELEMAC-BOWL)
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our utmost
support and care unl you use our product.
Questo manuale è adatto per i seguenti modelli
2
Altri manuali PROAIM Accessori per fotocamere
PROAIM
PROAIM VI-252-00 Manuale utente
PROAIM
PROAIM P-LTCP-01 Manuale utente
PROAIM
PROAIM PTZ-10 Manuale utente
PROAIM
PROAIM RS-1 Manuale utente
PROAIM
PROAIM FDL-250 Manuale utente
PROAIM
PROAIM Camtree Camshade Manuale utente
PROAIM
PROAIM P-UTRA-01 Manuale utente
PROAIM
PROAIM FF-WRLS-DR-ONE Manuale utente
PROAIM
PROAIM P-FK-BL Manuale utente
PROAIM
PROAIM P-LLBT-100 Manuale utente
PROAIM
PROAIM SnapRig CA202 Manuale utente
PROAIM
PROAIM CINEMA Series Manuale utente
PROAIM
PROAIM P-TP-100-B Manuale utente
PROAIM
PROAIM TRK-16-25 Manuale utente
PROAIM
PROAIM P-WV-2PL-SD Manuale utente
PROAIM
PROAIM SnapRig Cage CG215 Manuale utente
PROAIM
PROAIM CINEMA Series Manuale utente
PROAIM
PROAIM CH-FS7-TBK Manuale utente
PROAIM
PROAIM CINEMA Series Manuale utente
PROAIM
PROAIM Cinema Ceries Airwave 15 Manuale utente
