PROAIM Kite-22 Ultimate Package Guida rapida
PROAIM KITE-22 STARTER PACKAGE 2
At Proaim, our goal is to ensure 100% Customer sasfacon in all that
we do.
We back our sales with a 6-months warranty from the date of purchase
and work hard to resolve any problems in the unlikely event one should
arise.
With our commitment to connuous improvement and your Feedback,
building on our reputaon of providing aordable, quality products is
PRIORITY 1.
TABLE OF CONTENTS
Welcome 3
Introducon 3
What’s in the box 4-5
Assembling Instrucons 6
Installing the Hub Assembly 7
Installing the Jib secons 7-8
Assembling the Rear Frame 8
Installing the Rear Frame 10
Installing Head Plaorm 10
Installing the Stress Cables 11
Installing the Pan Tilt Head 11
Installing the Joysck Control 12
Balancing Tips 12
Installing Zoom Controller 14
Counterweights 15
Return Policy 16
Refund Policy 17
PROAIM KITE-22 STARTER PACKAGE 3
Dear Client
On behalf of all the people that work so hard to provide you with the most up to
date, exible and cost ecient producon gear, I would like to welcome you into
Proaim family. By purchasing your Proaim Kite-22 Starter Package, you have just
joined a host of designers, engineers, machinists, assembly, customer service and
oce sta that take great pride in all that they do. Our mantra of connuous
improvement has been the guiding principle of how we conduct our business
since day one. Once you have the opportunity to experience your new Proaim
Kite-22 Starter Package, I hope you will agree we cra quality products at a
compeve price. Products designed to meet and exceed the standards of
today’s real producon world. Standards set by you, our valued clients and
standards we strive to maintain. For they will always be
PROAIM KITE-22 STARTER PACKAGE 4
IT IS IMPORTANT THAT YOU READ AND UNDERSTAND THIS GUIDE BEFORE ATTEMPTING TO
ASSEMBLE OR USE YOUR PROAIM KITE-22 STARTER PACKAGE.
SHOULD YOU NEED ADDITIONAL INFORMATION, TECHNICAL ASSISTANCE IS AVAILABLE 'ON
LINE' BY CONTACTING YOUR SALES REPRESENTATIVE.
INTRODUCTION
A fully featured camera crane is the creave tool of choice for serious videographers and
semi-professionals. Our Proaim Kite-22 Starter package is designed for years of trouble-free oper-
aon and has the fastest setup and longest reach of any crane in its price category. With preci-
sion engineering and quality of manufacture, the Proaim Kite-22 Starter package is truly a profes-
sional tool that will expand a directors creave opportunies. The smooth-coated, corrosion re-
sistant cables are easy to handle and will last a lifeme.
WHAT’S IN THE BOX
Please inspect the contents of your shipped package to ensure you have received all that is
pictured and listed below. The grey foam shipping /storage container has been especially
designed to protect your purchase while in transit and is a good place to keep your Proaim
Kite-22 Starter package contents when not in use. You will receive this package in 4 boxes.
First Box includes
Jib Secons
Second Box includes
Jib Secons
Third Box includes
Accessories of Jib Crane
Fourth Box includes
Jib Stand
NOTE :
We send the Jib secons in two boxes. One box has the secons with
pipe packing and the other box (cardboard box) has the rest of the
secons. We only send one pipe packing for the jib secons.
1
3
4
PROAIM KITE-22 STARTER PACKAGE 5
Packaging Material of Jib Accessories Suitcase Box:
1. Spreader 10. Knobs for weight secon
2. Head Plaorm 11. Knobs for xing Hub Assembly
3. Weight rods 12. Locking pin for tripod legs
4. Joysck unit xing plate 13. Knobs for tripod legs
5. Hub Mounng 14. Locking pin for Jib arms
6. Stress Cable 15. Shank for weight secon
7. Shanks for Joining arms 16. Shank for Vercal Pivot Mounng
8. L-brackets for weight secon
9. LCD Monitor Adapter
ASSEMBLY INSTRUCTIONS
Open Tripod spreader. In order to extend legs of spreader, loosen the knob and extend it as
per your requirement and reghten the knob to secure.
Take out the Jib Stand from its case, spread and extend its legs.
PROAIM KITE-22 STARTER PACKAGE 6
Warning: We have provided double locking precauons on Jib Stand; Pin is the rst and pri-
mary locking, knob is the secondary locking, so rst lock the Pin to avoid slipping of stand.
Fix the tripod stand with Spreader and ghten the top ratchet knobs of stand to secure it in
place.
Install the Hub Assembly by sliding the boom of the hub assembly
into the stand’s Mount opening.
Warning: This is the Pan Fricon Knob. Never pan the Jib with this knob
ghtened.
If this knob turns while panning, it is too ght. Only ghten while parking
the jib !
INSTALLING THE HUB ASSEMBLY
Note : The Hub Assembly has several mounng holes. You can mount LCD
Monitor or Joysck box to this assembly if you want.
INSTALLING THE JIB SECTIONS
Install the Secon 7 & 6 (largest diameter secon to the rear) to the vercal pivot point with the
long bolt, washers and nut. Tighten the nut properly to secure the secon.
Match the holes of the boom leg secon with the upper leg secon to secure the tripod
stand with the Steel locking Pins and ghten the knobs.
Knob
Pin
PROAIM KITE-22 STARTER PACKAGE 7
Slide Secon 5 into Secon 6 and join with ring pin.
Install the pin at the rst join holes of the secons and bolt, washers and nut from side at
the second holes of secon.
First hole
Second Hole
This Ring Pin is to avoid the play in Jib.
This knob is for ghtening the Jib secons.
IMPORTANT
ASSEMBLING THE REAR FRAME
Take the two 16mm thick rods and two 25mm thick rods.
Aach these rods altogether so that it makes a rectangle
and for this insert the 16mm rods into slots of 25mm rods.
Aach the Allen bolts by screwing in with hand and ghten with Allen key at all the four
points to secure properly.
Similarly insert all the secons one by one (small to the big) and install the pin and bolt ,
washers and nut to secure each secon.
PROAIM KITE-22 STARTER PACKAGE 8
Align the threads of joysck plate with the threads of the 1mm rods and ghten the Allen
bolts with Allen key.
Take out the two black tubes from the weight rod.
Insert one L-Bracket and then the central black tube with washers at both ends into the
weight rod.
Insert the second L-Bracket & the third black tube at the end of the weight rod.
Detach the top screw from the frame from both sides.
Aach the rod with L-Brackets with the rectangular frame and ghten the top screw. Then
screw-in the knobs at both ends.
PROAIM KITE-22 STARTER PACKAGE 9
Aach the bigger weight rod with L-Brackets, for this insert the rod into one L-Bracket then
add the black tube with white washers at both the sides, insert the rod into the other L-
Bracket and then add the black tube. Tighten the nut and then aach the knob at the end.
INSTALLING THE REAR FRAME
To mount the Rear secon, align the Assembly’s ‘L’ brackets to the tail of jib secon and in-
sert the bolt with washers through one end of the secon to the other. Slide the bolt
through and hand ghten.
Add weights (Not Included) to the rear weight secon at both sides and ghten the weight
closer knobs to secure properly.
INSTALLING THE HEAD PLATFORM
Install the Head Plaorm assembly (leveling arm up) to the end of the smallest secon with
the provided bolt, sha collars, washers and nut. Tighten all the Allen bolts and nuts to se-
cure properly.
NOTE: Add white washers as per requirement on both sides of jib secon so that there is no
play in between head plate & Jib secon.
PROAIM KITE-22 STARTER PACKAGE 10
Connect the Head Plaorm Leveling Cable by hooking the turnbuckle ends .
INSTALLING THE STRESS CABLE
INSTALLING THE PAN TILT HEAD
Aach the Pan Tilt Head with the Jib. There are 4
mounng holes on the pan lt as well as the jib plate.
Align the holes and aach it with the screws. Tighten the
wing nuts to secure properly.
Adjust the mounng extension so that the pan motor is in the rear facing posion before
mounng.
Install your cable starng at the camera end; leaving enough cable slack for the camera for
full pan & lt movement, you may need to add Velcro to loop the cable around the jib arm.
INSTALLING THE JOYSTICK CONTROL
Install and hookup the pan & tilt joystick box on Jib Frame. Connect the wires with the Joy-
stick Control Box.
CABLES & CONTROL BOX
Install the 12 volt DC power (4 pin XLR) in rear of Joysck Box.
Note: Any 12 volt baery may operate the PROAIM™ SR PAN TILT HEAD as long as the
connector mates and is #1 pin Negave and #4 pin Posive.
CAUTION: DO NOT USE A UNREGULATED POWER SUPPLY! IF USING A REGULATED POWER SUP-
PLY IT MUST PRODUCE LESS THAN 12 VOLTS. MORE THAN 24 VOLTS MAY CAUSE PERMANENT
DAMAGE.
Altri manuali per Kite-22 Ultimate Package
6
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali PROAIM Controllori
