3
A) Switch On
To start the device, short press the On/Off button once, you will see the green
LED light blink once, and then it blinks once more together with the blue LED
light. When blue LED light off, Green LED light on, device is then started and
ready for recording.
B) Switch Off
One short press of the On/off button will switch off the device.
C) Auto shut-off
If you leave the device without operation for 30 seconds, it will automatically shut
off for power saving. You need to restart it again if you want to do new recording.
D) Recording
1. Start to record
In power on mode, one short press of recording button, it will start recording.
Blue LED light starts blinking to show that device is working properly. This
lights can also be noticed by your peripheralvision when glasses worn on nose.
Caution: DO NOT record towards the sun or it will damage the camera.
2. Stop and Save
During recording, one short press of the recording button, device will stop
recording and start saving data to the memory. Blue LED will light on and get
off very quickly within half second. When blue light goes off, data saving
finished and device is ready for next recording.
A) The device has no in-built memory. A complimentary 4GB TF card will be
included in the standard kit for data storage. User can choose to have 8GB TF card
for bigger storage at his or her discretion.
B) The memory card slot can support max 8GB TF card.
C) When space is full, LED light will stop blinking and start data saving;
