MAINTENANCE AND CLEANING
PERIODIC CLEANING AND PROPER MAINTENANCE WILL
EXTENDTHE LIFE OFYOUR ICE MAKER, ENSURE MAXIMUM
EFFICIENCY AND DELIVER BETTER TASTING ICE TO YOUR
CUSTOMER.
WARNING
DISCONNECT THE MACHINE FROM THE MAINS
ELECTRICITY BEFORE PERFORMING ANY CLEANING
OR MAINTENANCE
WARNING
INSPECTION, DE-SCALING AND SERVICING SHOULD
ONLY BE UNDERTAKEN BY A QUALIFIED ENGINEER
WARNING
NEVER CLEAN THE ICEMAKER WITH A PRESSURE
WASHER OR BY SPRAYING WATER
WARNING
NEVER USE ACIDIC OR ABRASIVE DETERGENTS, THESE
TYPES OF CLEANERS MAY TRANSFER TASTE AND
ODOUR TO THE MACHINE AND THE ICE. THIS TYPE
OF CLEANER MAY ALSO DAMAGE OR DISCOLOUR THE
ICE MAKER.
WARNING
NEVER CLEAN STAINLESS STEEL WITH A BLEACH
BASED CLEANER AS THIS MAY CAUSE CORROSION ON
THE STAINLESS STEEL.
EXTERIOR CLEANING
ALWAYS CLEAN THE EXTERIOR STAINLESS STEEL PARTS
OF THE ICE MAKER WITH A MICRO-FIBRE CLOTH AND OR
A SPONGE. ALWAYS CLEAN IN THE DIRECTION OF THE
GRAIN OF THE STAINLESS STEEL.
DO NOT USE ABRASIVE OR METALLIC PRODUCTS (WIRE
WOOL) WHICH COULD SCRATCH AND DAMAGE THE
SATIN FINISH OF THE ICE MAKER PERMANENTLY.
USING A METALLIC CLEANING PRODUCT SUCH AS
WIRE WOOL WILL DEPOSIT IRON PARTICLES INTO THE
STAINLESS STEEL WHICH COULD CAUSE CORROSION OF
THE STAINLESS STEEL FINISH.
INTERIOR CLEANING
CLEAN THE INTERIOR OF THE ICE BIN AND ALL
REMOVABLE PARTS BYWASHING THEM WITH A SOLUTION
OF LUKEWARM WATER AND A SMALL AMOUNT OF DISH-
WASHING LIQUID. RINSE AND DRY IMMEDIATELY.
WARNING
THE ICE STORAGE BIN IS FOR STORAGE OF ICE ONLY,
NEVER STORE ANYTHING OTHER THAN ICE IN THE
STORAGE BIN AS THIS IS A HEALTH HAZARD.
AIR FILTER
THE ICE MAKER IS EQUIPPED WITH AN AIR FILTER TO
PREVENT DIRT AND DUST ENTERING THE CONDENSER.
IT IS IMPORTANT THAT THE AIR FILTER IS CLEANED TWICE
A MONTH TO ENSURE EFFICIENT OPERATION OF THE ICE
MAKER.
TO CLEAN YOUR AIR FILTER SLIDE THE FILTER OUT FROM
THE FRONT GRILL AND REMOVE ANY DUST OR DIRT
USING A SOFT BRUSH AND A VACUUM CLEANER. IF THE
AIR FILTER IS HEAVILY BLOCKED WE RECOMMEND USING
WATER AND A MILD DETERGENT TO CLEAN THE FILTER.
IMPORTANT: AIR FILTER MUST BE CLEAN AND DRY
BEFORE REPLACING INTO THE MACHINE.
IMPORTANT: DO NOT OPERATE YOUR ICE MAKER
WITHOUT THE AIR FILTER IN PLACE
WARNING
FAILURE TO CLEAN YOUR AIR FILTER COULD CAUSE
COMPONENT FAILURE AND WILL INVALIDATE YOUR
WARRANTY.
CONDENSER CLEANING
A DIRTY OR CLOGGED CONDENSER WILL PREVENT
PROPER AIR FLOW. THIS WILL LEAD TO REDUCED
EFFICIENCY, REDUCED ICE PRODUCTION AND AN
INCREASE IN OPERATING TEMPERATURE WHICH MAY
LEAD TO COMPONENT FAILURE. WE RECOMMEND
THE CONDENSER IS CLEANED EVERY SIX MONTHS BY
A QUALIFIED ENGINEER. TO CLEAN THE CONDENSER
DISCONNECT THE ICE MAKER FROM THE MAINS
ELECTRICITY. REMOVE THE SCREWS FROM THE
BOTTOM PANEL AND GENTLY REMOVE THE GRILL.
REMOVE DIRT AND DUST FROM THE CONDENSER FINS
WITH A SOFT BRUSH AND VACUUM CLEANER. REATTACH
THE FRONT GRILL AND RECONNECT POWER TO THE
MACHINE.
WARNING
CONDENSER CLEANING MUST BE CARRIED OUT BY A
QUALIFIED ENGINEER
WARNING
FAILURE TO CLEAN YOUR CONDENSER COULD CAUSE
COMPONENT FAILURE AND WILL INVALIDATE YOUR
WARRANTY.
3CL161019SM Rev 1.0
PART II
