Prokit’s SS-257B Manuale utente
SS-257
LCD Smart Soldering Iron Station
User’s Manual
1st Edition,2018
© 2018 Copy Right by Prokit’s Industries Co., Ltd.
1
Thank you for purchasing the SS-257 LCD Smart Soldering
Iron Station. Please read this manual before operating the SS-257.
Please store the manual in a safe, easily accessible place for future
reference.
Features
• Large screen with backlight, LCD contrast and brightness are
adjustable.
• Designed with functional manual and shuffle knob for easy setting,
more convenient and user friendly.
•Comes with high end quad-wire heating element for heat fast recovery.
• Microprocessor controlled provide best performance and accurate
temperature control.
• Temperature calibration function.
• Auto sleep and wake up function, system lock, tip calibration and low
consumption.
•3 data memories store and recall frequently used temperature values.
•Built-in DC 5V/1A USB port for power supply.
• Complies with CE and ESD standard, conform to RoHS.
• Comes with UL Certified Wires.
• Silicone handpiece cord wire heat-resistant up to 200°C.
• Resettable fuse protection design.
Packing List
Please check the contents of the soldering station package and confirm
that all the items listed below are included.
Soldering Station………..……………1
Iron Holder with cleaning sponge .1
Soldering Iron…………………………1
Power Cord…………………..….……1
Alligator Clip Grounding Wire….…....1
User’s Manual……………...…………1
Precautions
In this instruction manual, "caution" are defined as follows.
2
CAUTION:
Misuse may potentially cause injury to the user or physical damage to
the objects involved.
For your own safety, be sure to comply with these precautions.
When the power is on, the tip temperature is between 30°C/86°F and
500°C/ 932°F. Since mishandling may lead to burns or fire, be sure to
comply with the following precautions.
Do not touch the metallic parts near the tip.
Do not use the product near flammable items.
Advise other people in the work area that the unit can reach a very
high temperature and should be considered potentially dangerous.
Turn the power off while taking breaks and when finished using the
unit.
Before replacing parts or storing the unit, turn the power off and allow
the unit to cool to room temperature.
To prevent damage to the unit and ensure a safe working environment,
be sure to comply with the following precautions.
Do not use the unit for applications other than soldering.
Do not rap the soldering iron otherwise subject the iron to severe
shocks.
Do not modify the unit.
Use only genuine replacement parts.
Do not wet the unit or use the unit when your hands are wet.
The soldering process will produce smoke, so make sure the area is
well ventilated.
While using the unit, don't do anything which may cause bodily harm
or physical damage.
3
Specifications
Model No.
SS-257E/
SS-257EU
SS-257B/
SS-257H
SS-257C
Input Voltage
110-120V~
60Hz
220-240V~
50Hz
240V~
50Hz
Control system
Microprocessor-controlled
Power consumption
75W
Output voltage
26VAC
LCD Display
73mmX40mm，240X120 dot. Backlight
Temperature range
30~500°C±10°C /86~932°F±50°F
Temperature calibration
0~699℃(32~1290℉)，Adjustment
Temperature stability
±2℃/±36℉(no load)
Heating element
High end quad-wire heater
Plug
E
B
H
C
Sleep mode
OFF & 1~360min adjustment
Temperature of sleep
mode
30~400℃/86~752℉
USB port output
DC 5V/1A
Memory setting
3set
Temperature lock
function
yes
Replacement heater
9SS-257-HT
Replacement soldering
iron
9SS-257-SI
Tip-to-ground resistance
potential
≦2Ω/≦2mV
Size (mm)
180 x 150 x 106mm
Weight
2.36kg
Package
Color Box
4
Replacement Tips:
Soldering
Iron
5V/1A
USB port
Soldering
Iron Port
Shuffle Knob
Power
Soldering
Iron Holder
Sponge
5
Main menu
LCD Display function description
1. Temperature of sleep mode 2.Seeting temperature
3.LCD brightness ratio 4. LCD screen contrast ratio
5. CH1 temperature memory setting
6. CH2 temperature memory setting
7. CH3 temperature memory setting
8. Current temperature
9. Temperature unit 10. Current sleep mode
11. Temperature lock 12. Current beep on or off
Function setting menu
Press knob for 3 sec., it will enter the function setting menu.
Temperature setting
Calibration of temp.
Sleep temperature setting
Sleep time setting
Temperature unit
Beep setting
LCD brightness setting
6
Setting up & operating the Soldering Station
1.Iron holder
Before using the unit, dampen the sponge with the water and squeeze it
dry.
2. Connections
1. Connect the soldering iron cord into the receptacle.
2. Place the soldering iron on the iron holder.
3. Plug the power cord into the power supply. Be sure to ground the
unit.
CAUTION: Be sure to turn off the power before connecting or
disconnecting the soldering iron. Failure to do so may damage the
P.W.B.
3.Start to use
Turn on the soldering station, LCD screen will display main menu after
three seconds, last set temperature will display.
4. Temperature setting
In the main menu, press lower part of shuffle knob, move cursor to
the ”SET” mode (as follow picture)，rotate around the shuffle knob in
clockwise direction to increase temperature，counter clockwise direction
to decrease temperature.
LCD contrast ratio setting
Temperature passcode
7
CAUTION: The soldering iron must be placed on the iron holder
when not in use.
CAUTION: It will withdraw form main menu automatically when not
set any function.
5. Temperature memory choose
In the main menu, press the center of shuffle knob twice, cursor will
move to the CH1/CH2/CH3(see fig.1) ，press the left or right position
of shuffle knob, choose the temperature needed.
Temperature memory setting
Press 3 seconds of shuffle knob into the function setting menu. Press
knob and move cursor to the ”Set. Temp.” mode, press knob again to
the temperature setting (see fig 2.), rotate around the shuffle knob in
clockwise direction to increase temperature, counter clockwise direction
to decrease temperature. Press knob to the next menu, choose the
“Save & Exit” save the temperature and exit the menu.
Fig.1 Fig.2
CAUTION: 3 seconds without making any settings, it will
automatically exit the menu.
8
6. Temperature Calibration Set
The soldering iron should be recalibrated after changing the iron, or
replacing the heating element or tip.
6.1 In the function setting menu, move cursor to the “Cal. Status.”
mode then press the knob. Move cursor to the ”Real Temp” , input the
real temperature, move cursor to the “OK” (see fig 3) then press knob
confirm it. Press knob to the next menu, choose the “Save & Exit” save
the temperature and exit menu.
Fig.3 Fig.4
6.2. Calibrating the iron temperature
Setting the soldering iron station temperature to 350℃, when the
temperature stabilizes, use soldering iron tip thermometer
measurement and record tip real temperature, follow the procedure
6.1 input real temperature (see Fig.4), soldering iron station will
calculate temperature.
6.3 Cal. Status description
6.3.1. When Cal. status display “----“(see Fig 5)，it means
temperature have not calibration.
Fig.5 Fig.6
9
6.3.2. When Cal. status display “>>>>” (see Fig 6.)，it means “Real
Temp.” has calibrated and increase temperature.
For example :“set.Temp”is 350℃, "Real Temp.”is 320℃, after
temperature calibration as Fig 4.,temperature will rise to 350℃.
6.3.3.When Cal. status display “<<<<” (see Fig 7.)，it means “Real
Temp.” has calibrated and decrease temperature.
6.3.4. When Cal. status display “》》》” (see Fig 8.)，it means “Real
Temp.” has calibrated to max. temperature, can not increase anymore,
but it can decrease temperature.
Fig.7 Fig.8
6.3.5. When Cal. status display “《《《” (see Fig 9.)，it means “Real
Temp.” has calibrated to minimum temperature, can not decrease
anymore, but it can increase temperature.
Fig.9
7. Auto sleep temperature and Timer setting
7.1 In the function setting menu, move cursor to the “Sleep Temp.”
mode, press knob to the setting, temperature range is 30~400℃
(86~752℉), after setting, press knob to the next menu, choose the
“Save & Exit” save the temperature and exit the menu.
7.2 In the function setting menu, move cursor to the ”Sleep Timer”
mode, press knob to the setting, sleep timer is adjustable from
1~360 minutes or setting “OFF” stop sleep mode activate, after
Questo manuale è adatto per i seguenti modelli
5
