ProLights RA2000PROFILEHB Manuale utente
USER MANUAL
RA2000PROFILEHB
LED MOVING PROFILE
EN
All rights reserved by Music & Lights S.r.l. No part of this instruction manual may be
reproduced in any form or by any means for any commercial use.
In order to improve the quality of products, Music&Lights S.r.l. reserves the right to modify the
characteristics stated in this instruction manual at any time and without prior notice.
All revisions and updates are available in the ‘manuals’ section on site www.musiclights.it
REV .01-12/19
1
RA2000PROFILEHB
Packing content • RA2000PROFILEHB
• Power cable
• OS25 (2 pcs)
• Safety cable
• User manual
TABLE OF CONTENTS Safety
General instructions
Warnings and installation precautions
1 Introduction
1. 1 Description
1. 2 Operating elements and connections
2 Installation
2. 1 Mounting
3 Functions and settings
3. 1 Operation
3. 2 Basic
3. 3 Menu structure
3. 4 Linking
3. 5 DMX addressing conguration
3. 6 DMX mode conguration
3. 7 DMX addressing
3. 8 Movement
3. 9 Screen
3. 10 Fixture settings
3. 11 Fans mode
3. 12 Auto and manual test
3. 13 Reset of the function
3. 14 Adjust
3. 15 Informaion of the device
3. 16 DMX view
3. 17 Connection of the DMX line
3. 18 Construction of the DMX termination
3. 19 DMX control
3. 20 Color - Gobos wheel
4 Maintenance
4. 1 Maintenance and cleaning the unit
4. 2 Fuse replacement
4. 3 Trouble shooting
2
2
3
4
5
6
6
7
10
10
10
10
11
12
12
13
13
13
13
13
14
15
15
16
22
23
23
24
RA2000PROFILEHB
2
WARNING! Before carrying out any operations with the unit, carefully read this instruction
manual and keep it with cure for future reference. It contains important information about
the installation, usage and maintenance of the unit.
SAFETY
General instruction
• The products referred to in this manual conform to the European Community Directives and are there-
fore marked with and approved for the North American Market.
• The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled personnel only.
Never make any modications on the unit not described in this instruction manual, otherwise you will
risk an electric shock.
• Connection must be made to a power supply system tted with ecient earthing (Class I appliance ac-
cording to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units
from indirect contact and/or shorting to earth by using appropriately sized residual current devices.
• The connection to the main network of electric distribution must be carried out by a qualied electrical
installer. Check that the main frequency and voltage correspond to those for which the unit is designed
as given on the electrical data label.
• This unit is not for home use, only professional applications.
• Never use the xture under the following conditions:
• - in places wet;
• - in places subject to vibrations or bumps;
• - in places with a temperature of over 45 °C.
• Make certain that no inammable liquids, water or metal objects enter the xture.
• Do not dismantle or modify the xture.
• All work must always be carried out by qualied technical personnel. Contact the nearest sales point for
an inspection or contact the manufacturer directly.
• If the unit is to be put out of operation denitively, take it to a local recycling
• plant for a disposal which is not harmful to the environment.
Warnings and installation precautions
• If this device will be operated in any way dierent to the one described in this manual, it may suer
damage and the guarantee becomes void. Furthermore, any other operation may lead to dangers like
short circuit, burns, electric shock, etc.
• Before starting any maintenance work or cleaning the projector, cut o power from the main supply.
• Always additionally secure the projector with the safety rope. When carrying out any work, always com-
ply scrupulously with all the regulations (particularly regarding safety) currently in force in the country
in which the xture’s being used.
• For inside use only. Not designed for outside use.
• The minimum distance between the xture and surrounding walls must be more than 50 cm and the
air vents at the housing must not be covered in any case.
• Install the xture in a well ventilated place.
• Keep any inammable material at a safe distance from the xture.
• The maximum temperature that can be reached on the external surface of the tting, in a thermally
steady state, is high. After power o, please cool down over 15 minutes.
• Shields, lenses or ultraviolet screens shall be changed if they have become damaged to such an extent
that their eectiveness is impaired.
• The lamp (LED) shall be changed if it has become damaged or thermally deformed.
• Never look directly at the light beam. Please note that fast changes in lighting, e. g. ashing light, may
trigger epileptic seizures in photosensitive persons or persons with epilepsy.
• This product was designed and built strictly for the use indicated in this documentation. Any other use,
not expressly indicated here, could compromise the good condition/operation of the product and/or
be a source of danger.
• We decline any liability deriving from improper use of the product.
3
RA2000PROFILEHB
- 1 - INTRODUCTION
1.1 TECHNICAL DRAWING
443
697
293
443
697
507
Technical drawing Fig.1
RA2000PROFILEHB
4
13
89 10 11 12
6 7
7
1
2
3
5
4
1.3 OPERATING ELEMENTS AND CONNECTIONS
1. MOVING HEAD
2. TILT Mechanism Lock and Release
3. ROTARY ARM
4. PAN Mechanism Lock and Release
5. BASE
6. HANDLE
7. CONTROL PANEL with TFT display
and 5 button used to access
the control panel functions and
manage them.
8. POWER IN (PowerCON TRUE
IN): for connection to a socket
(100-240V~/50-60Hz) via the
supplied mains cable.
9. POWER OUT (PowerCON
TRUE OUT): power output for
connection of multiple units in
series.
10. MAIN FUSE HOLDER: replace a
burnt-out fuse by one of the same
type only.
11. DMX IN (5-pole XLR):
1 = ground, 2 = DMX-, 3 = DMX+,
4 N/C, 5 N/C.
12. DMX OUT (5-pole XLR):
1 = ground, 2 = DMX-, 3 = DMX+,
4 N/C, 5 N/C.
13. RUBBER FEET
Fig.2
5
RA2000PROFILEHB
- 2 - INSTALLATION
2.1 MOUNTING
The RA2000PROFILEHB may be set up on a solid and even surface. By means of the xing facilities of the
baseplate, the unit can also be mounted upside down to a cross arm. The base plate is shown in g.3. For
xing, stable mounting clips are required. According to the gure, the bolts of the brackets are placed into
the openings provided in the base plate and turned clockwise until they lock (to the stop). Always ensure
that the unit is rmly xed to avoid vibration and slipping while operating.The mounting place must be of
sucient stability and be able to support a weight of 10 times of the unit’s weight. When carrying out any
installation, always comply scrupulously with all the regulations (particularly regarding safety) currently
in force in the country in which the xture’s being used. Always additionally secure the projector with the
safety rope from falling down. For this purpose, fasten the safety rope at a suitable position so that the
maximum fall of the projector will be 20 cm.
Fig.3
CLAMPS
OMEGA
RA2000PROFILEHB
6
- 3 - FUNCTIONS AND SETTINGS
3.1 OPERATION
Connect the supplied main cable to a socket (100-240V~/50-60Hz). The unit will run built-in program to
reset all motors to their home position. Shortly after that the RA2000PROFILEHB is ready for operation.
To switch o, disconnect the mains plug from the socket. For a more convenient operation it is recom-
mended to connect the unit to a socket which can be switched on and o via light switch.
NOTE: remove the pan and tilt lock before connecting the RA2000PROFILEHB to the power supply.
3.2 BASIC
The control panel of RA2000PROFILEHB has a display and 5 buttons for the complete programming and
management of the projector menu (g.4).
Fig.4 - Functions of the buttons and display icons
UP DOWN LEFT RIGHT ENTER
Increases the value
displayed or passes
to the previous item
in a menu
Decreases the value
displayed or passes
to the next item in
the menu
Return to the top
level
Commute from
units, tens, hundred
in the menu
Conrms the
displayed value,
or activates the
displayed function,
or enters the
successive menu
7
RA2000PROFILEHB
3.3 MENU STRUCTURE
MENU
1CONNECT ðAddress ðValue (1-512)
DMX Mode ðStandard 38Ch
Standard 40Ch
Extended 39Ch
Extended 41Ch
Extended 42Ch
Standard 38Ch
2SET UP ðMovement ðPan Reverse ðNO/YES Default: No
Tilt Reverse ðNO/YES Default: No
Pan Feedback ðNO/YES Default: Yes
Tilt Feedback ðNO/YES Default: Yes
Screen ðBacklight ðOn/10s/20s/ 30s Default: On
Flip Display ðNO/AUTO/YES Default: No
Warn Cue ðON/OFF Default:On
Key Lock ðNO/YES Default: No
Fixture ðDimmer Mode ðOFF/Dimmer 1/Dimmer 2/Dimmer 3 Default: O
Fans Mode ðAuto/Silent/High/O Default: Auto
Temperature unit ð°C /°F Default: °C
Auto Test ðAutoTest …
Manual Test ðPan
Pan Fine
Tilt
Tilt Fine
P/T Speed
Dimmer
Shutter
Cyan
Magenta
Yellow
CTO
Color
Gobo
RGobo
PrismRot.
Eect
REect
Focus
Zoom
Frost 1
Frost 2
Iris
ðValue (000-255) for each function Default:
Tilt=128
Dimmer=255
Shutter = 255
RA2000PROFILEHB
8
Fr.shutters Rot.
Fr.shutter 1 Move.
Fr.shutter 1 Swiv.
Fr.shutter 2 Move.
Fr.shutter 2 Swiv.
Fr.shutter 3 Move.
Fr.shutter 3 Swiv.
Fr.shutter 4 Move.
Fr.shutter 4 Swiv.
ðValue (000-255) for each function
3ADVANCED ðReset ðAll
Pan
Tilt
Cyan
Magenta
Yellow
CTO
Color
Gobo
Prism
Eect
Focus
Zoom
Frost1
Frost2
Iris
Fr.shutters Rot.
Fr.shutter 1 M1
Fr.shutter 1 M2
Fr.shutter 2 M1
Fr.shutter 2 M2
Fr.shutter 3 M1
Fr.shutter 3 M2
Fr.shutter 4 M1
Fr.shutter 4 M2
ðValue (000-255) for each function
Altri manuali per RA2000PROFILEHB
1
Indice
Altri manuali ProLights Riflettore
Manuali Riflettore popolari di altre marche
Guangzhou Yinhe Lighting&Sound Equipment Factory
Guangzhou Yinhe Lighting&Sound Equipment Factory NE-204 Manuale utente
LIVARNO home
LIVARNO home 375304 2101 Istruzioni originali
Cameo
Cameo CLQS40WW Manuale utente
Leviton
Leviton Ellipsoid 5/50 Manuale utente
Monacor
Monacor img Stage Line PARL-56PDX/CR Manuale utente
Vector
Vector SL3AKV Manuale utente
EuroLite
EuroLite Akku flat light 1 Manuale utente
Commercial Electric
Commercial Electric SPTM-1401 Manuale utente
Vision & Control
Vision & Control SLB-500-W5K7-P-SL Manuale utente
Teknik
Teknik FLEXI Manuale utente
Craftsman
Craftsman CMXLSB10 Manuale utente
EuroLite
EuroLite LED SLS-144 UV Floor Spot Manuale utente