PROLiNK INSPIRE 703SFC Manuale utente

Version 1.00

(English | Indonesian)

User Guide

Fast

Line interactive UPS

with Super

charging speed

INSPIRE 703SFC, INSPIRE 853SFCU,

INSPIRE 1203SFCU, INSPIRE 1253SFCU,

INSPIRE 1503SFCU, INSPIRE 2003SFCU,

INSPIRE 3003SFCU

CAUTION:

10.

11.

12.

13.

14.

ii.

iii.

iv.

Remove watches, rings, or other metal objects.

Use tools with insulated handles.

Wear rubber gloves and boots.

Do not lay tools or metal parts on top of batteries.

Disconnect charging source prior to connecting or disconnecting batteries terminal.

WARNING:

1. DO NOT modify the UPS input cable.

2. Consult your dealer if the UPS input cable connector does not match the utility receptacle.

3. The UPS must be grounded while in use. Operate the UPS only from a properly grounded AC outlet

(2 wire plus ground).

4. Turn oﬀ the UPS before unplugging it from the AC outlet.

Important Safety Warning1

EN1

To prevent the risk of ﬁre or electric shock, install in a temperature and humidity controlled

indoor area free of conductive contaminants. (See the speciﬁcations for the acceptable

temperature and humidity range.)

To reduce the risk of overheating the UPS, DO NOT cover the UPS' cooling vents and

avoid exposing the unit to direct sunlight or installing the unit near heat emitting appliances

such as space heaters or furnaces.

DO NOT attach non-computer-related items, such as medical equipment, life-support

equipment, microwave ovens, or vacuum cleaners to UPS.

DO NOT plug the UPS input into its own output.

DO NOT allow liquids or any foreign object to enter the UPS. DO NOT place beverages or

any other liquid-containing vessels on or near the unit.

In the event of an emergency, press the OFF button and disconnect the power cord from

the AC power supply to properly disable the UPS.

DO NOT attach a power strip or surge suppressor to the UPS.

Attention hazardous through electric shock. Also with disconnection of this unit from the

mains, hazardous voltage still may be accessible through supply from battery. The battery

supply should be therefore disconnected in the plus and minus pole at the quick connectors

of the battery when maintenance or service work inside the UPS is necessary.

Servicing of batteries should be performed or supervised by personnel knowledgeable of

batteries and the required precautions. Keep unauthorized personnel away from batteries.

When replacing the batteries, use the same number and type of batteries.

Internal battery voltage is 12VDC. Sealed, lead-acid, 6-cell battery.

DO NOT dispose of batteries in a ﬁre. The battery may explode. DO NOT open or mutilate

the battery or batteries. Released electrolyte is harmful to the skin and eyes.

Unplug the UPS prior to cleaning and DO NOT use liquid or spray detergent.

A battery can present a risk of electric shock and high short circuit current. The following

precaution should be observed before replacing batteries:

Package Contents2

EN2

x 1 x 1

Note:

1. The illustrations in this document may appear diﬀerent from your model.

2. If any of above item is not packed in your package when open, please consult your seller immediately.

Overview3

Battery Mode Indicator:

Yellow LED Flashing

INSPIRE 703SFC

Front View Rear View

Legend:

Backup Outlets

Power AC Input

Fault Indicator:

Red LED Lighting

AC Mode Indicator:

Green LED Lighting

Power Switch

English

Overview3

EN3

INSPIRE 853SFCU

Front View Rear View

Legend:

USB Port

RJ11 Ports (In & Out)

Backup Outlets

Power AC Input

Fault Indicator:

Red LED Lighting

Battery Mode Indicator:

Yellow LED Flashing

AC Mode Indicator:

Green LED Lighting

Power Switch

INSPIRE 1203SFCU

Front View Rear View

Legend:

Power AC Input

USB Port

RJ45 Ports (In & Out)

Backup Outlets

Fault Indicator:

Red LED Lighting

Battery Mode Indicator:

Yellow LED Flashing

AC Mode Indicator:

Green LED Lighting

Power Switch

Overview3

EN4

INSPIRE 1503SFCU

Front View Rear View

Legend:

Fan

USB Port

RJ45 Ports (In & Out)

Power AC Input

Backup Outlets

Fault Indicator:

Red LED Lighting

Battery Mode Indicator:

Yellow LED Flashing

AC Mode Indicator:

Green LED Lighting

Power Switch

INSPIRE 1253SFCU

Front View Rear View

Legend:

Power AC Input

RJ45 Ports (In & Out)

Backup Outlets

USB Port

Fault Indicator:

Red LED Lighting

Battery Mode Indicator:

Yellow LED Flashing

AC Mode Indicator:

Green LED Lighting

Power Switch

English

Overview3

EN5

INSPIRE 2003SFCU

Front View Rear View

Legend:

Fan

USB Port

RJ45 Ports (In & Out)

Power AC Input

Backup Outlets

Fault Indicator:

Red LED Lighting

Battery Mode Indicator:

Yellow LED Flashing

AC Mode Indicator:

Green LED Lighting

Power Switch

INSPIRE 3003SFCU

Legend:

Modem/Phone/

Network surge protection

AC input

USB port

Circuit breaker

Backup Outlets

Fault Indicator:

Red LED Lighting

AC Mode Indicator:

Green LED Lighting

Battary Mode Indicator:

Green LED Flasing

Power switch

AC Mode:

Indicating load level

Battery Mode: Indicating

battery capacity

Front View Rear View

EN6

Data Line Surge Protection (Only for the model with RJ11/RJ45)

Connect a single network/telephone/fax line into surge-protected “IN” outlet on the back

panel of the UPS unit. Connect from “OUT” outlet with another network/telephone/fax line

cable.

Turn On/Oﬀ the Unit

Turn on the UPS unit by pressing the power switch. Turn oﬀ the UPS unit by pressing again

the power switch.

Connect Communication Cable (Only for the model with USB port)

To allow for unattended UPS shutdown/start-up and status monitoring, connect the

communication cable one end to the USB port and the other to the communication port of

your PC. With the monitoring software installed, you can schedule UPS shutdown/start-up

and monitor UPS status through PC.

CAUTION:

NEVER connect a laser printer or scanner to the UPS unit. This may cause the damage of the unit.

Connect the Loads

Plug in the loads to output receptacles on the rear panel of the

UPS. Simply turn on the power switch of UPS unit, and then

devices connected to the UPS will be protected by UPS unit.

English

EN7

Software Download & Installation5

Storage and Maintenance6

Note:

Only for model with USB port.

Please follow steps below to download and install monitoring software:

1. Go to the website http://www.power-software-download.com

2. Click ViewPower software icon and then choose your required OS to download the

software.

3. Follow the on-screen instruction to install the software.

4. When your computer restarts, the monitoring software will appear as orange plug icon

located in the system tray, near the clock.

5. For UPS with HID-compliant USB Port (optional), you may safely shutdown the UPS during

power failure simply by connecting to a computer with pre-installed Windows/ Linux/ Mac

OS through the USB port even without monitoring software.

Storage

Before storing, charge the UPS at least 6~8 hours. Store the UPS covered and upright in a

cool, dry location. During storage, recharge the battery in accordance with the following table:

Maintenance

-25°C - 40°C Every 3 months 1-2 hours

40°C - 40°C Every 2 months 1-2 hours

STORAGE

TEMPERATURE

RECHARGE

FREQUENCY

CHARGING

DURATION

The UPS system operates with hazardous voltages. Repairs may be carried out only

by qualiﬁed maintenance personnel.

Only persons are adequately familiar with batteries and with the required

precautionary measures may replace batteries and supervise operations.

Unauthorized persons must be kept well away from the batteries.

Batteries may cause electric shock and have a high short-circuit current. Please

remove all wristwatches, rings and other metal personal objects before maintenance

or repair, and only use tools with insulated grips and handles for maintaining or

repairing.

Even after the unit is disconnected from the mains, components inside the UPS system

are still connected to the battery packs which are potentially dangerous.

EN8

Troubleshooting7

Use the table below to solve minor problems.

No LED display on

the front panel

Alarm continuously

sounds when the

main is normal

When power

fails, back-up

time is

shortening

The main is normal

but LED is ﬂashing Power cord is loose Reconnect the power cord properly

The UPS is overload

Battery defect. It might

be due to high

temperature operation

environment or improper

operation to battery

Replace the battery with the same

type of battery

Remove some critical load

Battery voltage is too low Charge the UPS at least 6 hours

The UPS is overload

Remove some loads ﬁrst. Before

reconnecting equipment, please verify

that the load matches the UPS

capability speciﬁed in the specs.

Low battery Charge the UPS at least 6 hours

Battery fault

The UPS is not turned on Press the power switch again to turn on

the UPS

Replace the battery with the same type

of battery

PROBLEM POSSIBLE CAUSE SOLUTIONS

When replace the batteries, install the same number and same type of batteries.

Do not attempt to dispose of batteries by burning them. This could cause battery

explosion. The batteries must be rightly deposed according to local regulation.

Do not open or destroy batteries. Escaping electrolyte can cause injury to the skin

and eyes. It may be toxic.

Do not disassemble the UPS system.

Storage and Maintenance6

English

EN9

Note: #1: Only applicable for INSPIRE 853SFCU.

Speciﬁcations8

MODEL INSPIRE 703SFC INSPIRE 853SFCU

Capacity

INPUT

650 VA 850 VA

OUTPUT

Voltage Range

Frequency

Phase

140 - 300VAC ±5% for 230VAC mode

140 - 290VAC ±5% for 220VAC mode

50Hz/60Hz (Auto-sensing)

Single + GND

Voltage Range

Battery Mode

Frequency

Waveform

Transfer Time

220VAC/230VAC + 12%-14%

220VAC/230VAC ±10%

50Hz ± 1% (Battery Mode); 60Hz ± 1% (Battery Mode)

Simulated Sine Wave (Battery Mode), Sine Wave (AC Mode)

2ms typical

Noise Level

Temperature

Humidity

Built in AVR

Diamension D x W x H

Weight (kg)

< 40dB

0˚C - 40˚C

0 - 90%

TRUE Full AVR (3steps)

279 x 101 x 142mm

BATTERY

PROTECTION/MONITORING

SOFTWARE MONITORING

Type & Number

Backup Time

Charging Time

12 V/ 7 AH x 1 12 V/ 9 AH x 1

8 - 30 mins depending on the load

2 - 4 hours recover to 90% capacity

Short Circuit

Protection

Surge

Protection

Alarm

UPS Protection

Overload

Protection

Intelligent Battery

Management

Data Line Surge

Protection

USB Connector #1

Software #1

AC Fault, Battery Low, Shutdown UPS

Support Windows® 7/ 8/ 10, Linux and Mac

GENERAL

RJ11-

4.2 4.9

Yes (Line Mode and Battery Mode)

Yes

Audible & Visual

Load Auto Sensing and Abnormal Protection

Line Mode - 100 - 120% 5mins change to fault mode

>120% change to fault mode immediately

Battery Mode - 100 - 120% 5 secs shutdown

>120% shutdown immediately

Prevent overcharging of battery

Protect battery and prolong battery life

Questo manuale è adatto per i seguenti modelli

Indice

Lingue:

Altri manuali PROLiNK UPS

PROLiNK

PROLiNK Professional II+ Series Manuale utente

PROLiNK

PROLiNK PROFESSIONAL I Series Manuale utente

PROLiNK

PROLiNK PRO700SFT Manuale utente

PROLiNK

PROLiNK PWR7000 Series Manuale utente

PROLiNK

PROLiNK PRO Series Manuale utente

PROLiNK

PROLiNK PRO2000LD Manuale utente

PROLiNK

PROLiNK PRO1201SFC Manuale utente

PROLiNK

PROLiNK PRO850SU Manuale utente

PROLiNK

PROLiNK MASTER II Series Manuale utente

PROLiNK

PROLiNK Master III Series Manuale utente

PROLiNK

PROLiNK MASTER II Series Manuale utente

PROLiNK

PROLiNK PRO700C Manuale utente

PROLiNK

PROLiNK MASTER II Series Manuale utente

PROLiNK

PROLiNK PRO700SFC Manuale utente

PROLiNK

PROLiNK PRO850VU Manuale utente

PROLiNK

PROLiNK Giant PRO600-S/L Manuale utente

PROLiNK

PROLiNK MASTER II Series Manuale utente

PROLiNK

PROLiNK PRO700V Manuale utente

PROLiNK

PROLiNK PRO850SFCU Manuale utente

PROLiNK

PROLiNK Giant II Series Manuale utente

PROLiNK

PROLiNK PRO1200SV Manuale utente

PROLiNK

PROLiNK PWR9000 Series Manuale utente

PROLiNK

PROLiNK PRO800-QS Manuale utente

PROLiNK

PROLiNK EnerHome PRO PRO700 Manuale utente

Manuali UPS popolari di altre marche

Pylontech

Pylontech Victron & Pylontech US5000 Manuale utente

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manuale utente

Mecer

Mecer ME-1000-WTU Manuale utente

Mustek

Mustek PowerMust 530(B) Plus Manuale di installazione e funzionamento

Emerson

Emerson Liebert NXL series Manuale utente

MAKELSAN

MAKELSAN BOXER SERIES Manuale utente

Block

Block PC-0524-400-0 Manuale utente

CyberPower

CyberPower CP585LCD Manuale utente

Eaton

Eaton 3S Istruzioni per il montaggio

CyberPower

CyberPower Office Tower Series UPS 1000 Manuale utente

CyberPower

CyberPower BM100 Manuale utente

Best Power

Best Power 610 Manuale utente

Best Power

Best Power Unity/I UT3K Manuale utente

Mustek

Mustek PowerMust 400 Offline Manuale utente

Xantrex

Xantrex Trace 512 UR-UPS Manuale utente

Forza

Forza SL-1501UL Manuale utente

LEGRAND

LEGRAND keor 310081 Manuale utente

ABB

ABB Conceptpower DPA 500 Manuale utente