Promatic WDC10B Manuale utente
PROMATIC WDC10B
- mixing or direct heating circuit controller
- d. h. w. warming controller
- liquid fuel boiler controller
PROMATIC WDC
Witterungsgeführte Heizungsregler
DEU
Weather compensated heating controller
ENG
PROMATIC WDC10
- mixing and direct heating circuit controller
- d. h. w. warming controller
- controller of systems with liquid or
solid fuel boiler
PROMATIC WDC20
- controller of two mixing circuit or direct and
mixing circuit
- controller of d. h. w. warming with boiler and
solar collectors
- liquid fuel boiler controller
- controller of systems with liquid or solid fuel
boiler, heat pump or bivalent systems
PROMATIC WDC10B
- Regler des Mischer- oder
Direktheizkreises
- Regler der Brauchwassererwärmung
- Kesselregler für Flüssigbrennstoff
PROMATIC WDC10
- Regler des Mischer- und Direktheizkreises
- Regler der Brauchwassererwärmung
- Regler von Kesselsystemen für
Flüssig- oder Festbrennstoff
PROMATIC WDC20
- Regler zweier Mischerheizkreise oder des
Mischer- und Direktheizkreises
- Regler der Brauchwassererwärmung mittels
Kessel und Sonnenkollektoren
- Kesselregler für Flüssigbrennstoff
- Regler eines Zweikesselsystems,
Wärmepumpe oder eines bivalentes
Systems
3
ENG DEU
Weather compensated heating controller
WDC10B, WDC10 and WDC20
Witterungsgeführte Heizungsregler
WDC10B, WDC10 und WDC20
User manual 5
ENG
INTRODUCTION
Weather compensated controllers WDC are intended for control of direct and/or mixing heat-
ing circuit or two mixing heating circuits and d. h. w. warming with a boiler, solar collectors
and other energy sources.
Weather compensated heating controller
WDC10B, WDC10 and WDC20
For initial setup see Initial controller setup, page 9!
User manual 6
ENG
CONTENTS
Introduction ................................................................................................................................ 5
USER MANUAL
Controller description ................................................................................................................. 8
Initial controller setup ................................................................................................................. 9
Graphic LCD display .................................................................................................................. 12
Description of symbols presented on the display ....................................................................... 13
Help screens, messages and warnings ...................................................................................... 17
Entering and navigating through the menu ................................................................................ 18
Menu structure and description of the menu .............................................................................. 18
Temperature settings ................................................................................................................. 23
User functions ............................................................................................................................ 24
Operating mode selection .......................................................................................................... 26
Setting time programs ................................................................................................................ 28
Basic settings ............................................................................................................................. 30
Data overview ............................................................................................................................ 32
SERVICE SETTING MANUAL
Controller parameters ............................................................................................................... 33
User parameters ........................................................................................................................ 33
Heating curve ................................................................................................................... 36
Service parameters ................................................................................................................... 38
Parameters for floor screed drying ............................................................................................. 50
Factory settings ......................................................................................................................... 51
Basic description of controller operation .................................................................................... 52
Mixing heating circuit ........................................................................................................ 52
Direct heating circuit ......................................................................................................... 53
Liquid fuel boiler ................................................................................................................ 54
Heat pump ........................................................................................................................ 54
Pump for additional mixing in boiler (bypass pump) .......................................................... 55
Domestic hot water ........................................................................................................... 55
Domestic hot water circulation .......................................................................................... 57
Remote heating activation ................................................................................................. 57
Operation of heating systems with two heat sources ........................................................ 57
Connection of temperature sensors .................................................................................. 59
Room unit DD2+ and RCD ................................................................................................ 60
Operation mode by sensor malfunction ............................................................................. 61
Expanding the system on multiple heating circuits ............................................................ 62
Connecting the controller to PC - SELCONTROL ............................................................. 63
Installation and connection of VT safety limiter ................................................................. 64
Divert valve operation by system with two heat sources ................................................... 65
Setting the minimum rotation rate of R6 pump .................................................................. 66
Sensor simulation. ............................................................................................................ 66
Differential controller ......................................................................................................... 67
User manual 7
ENG
INSTALLATION MANUAL
Controller installation .................................................................................................................. 68
Installation onto a wall ................................................................................................................ 69
Marking and description of temperature sensors ........................................................................ 69
Electrical connection of a controller ............................................................................................ 70
Connecting cables and sensors .................................................................................................. 71
Controller malfunction and servicing ........................................................................................... 72
Technical data ............................................................................................................................ 73
Disposal of old electrical and electronic equipment .................................................................... 75
Hydraulic schemes ..................................................................................................................... 145
User manual 8
ENG
USER MANUAL
CONTROLLER DESCRIPTION
1
2
3
4
5
6
8
7
2
1
3
Graphic display.
button (Esc - return to previous).
button (Help).
5
4
6
button(one step back, decrease).
7
8
Screw for fastening the cover.
button (enters a menu, confirms selection).
button (one step forward, increase).
Cover of the connection area.
User manual 9
ENG
INITIAL CONTROLLER SETUP
WDC heating controllers are equipped with an innovative solution which enables the setup of
controller in just three or four easy steps.
When the controller is connected to the network for the first time, the display first shows the
program version and company logo and then the first step of the procedure for controller
settings is presented.
Use buttons and to select the desired language.
Confirm the selected language by pressing .
The controller requires a confirmation of language selec-
tion with the button.
In case you chose the wrong language, return to the lan-
guage selection with the button.
If you do not find the desired language in the first screen, move to the next screen
with .
STEP 1 - SET LANGUAGE
User manual 10
ENG
Later you can change the selected hydraulic scheme with service parameter S1.1.
Select a hydraulic scheme for controller operation.
Move between schemes with buttons and .
Confirm the selected scheme by pressing .
STEP 2 - SET HYDRAULIC SHEME
The controller requires a confirmation of language selec-
tion with the button.
In case you choose the wrong scheme, return to scheme
selection with the button.
3. STEP- SET THE HEATING CURVE STEEPNESS FOR THE FIRST CIRCUIT
Set the heating curve steepness for room heating for the
first heating circuit.
Change the value with buttons and .
Confirm the selected value by pressing .
The controller requires a confirmation of the set heating
curve steepness with the button.
In case you choose the wrong heating curve steepness,
return to heating curve steepness selection with the
button.
Later you can change the heating curve steepness with parameter P2.1.
The meaning of heating curve steepness is described in detail on page 36.
All schemes with mixing heating circuit are
available for radiators and floor/wall heating.
Questo manuale è adatto per i seguenti modelli
3
Indice
Lingue:
Altri manuali Promatic Controllori
