Promovec Element Manuale utente
Instruction Manual
Promovec Electric
Element
Flow
Wave
Stream
2
Contents
1. Introduction.....................................................Page 3
2. Product description.........................................Page 4
2.1 Frame number ................................................Page 4
3. Functions/settings ..........................................Page 5
3.1 Battery indicator .............................................Page 5
3.2 Assist function................................................Page 5
3.3 Gear lever........................................................Page 5
3.4 Mantling/dismantling of battery.....................Page 6
3.5 Mounting of battery charger ..........................Page 6
3.6 Driving instructions........................................Page 7
4. Highway code.................................................Page 7
5. Insurance.........................................................Page 8
6. Battery charger ...............................................Page 8
6.1 Use of battery charger ....................................Page 8
6.2 Charging .........................................................Page 8
6.3 Storage for the winter.....................................Page 10
6.4 Warning ..........................................................Page 11
7. LCD display functions....................................Page 12
8. Warranty .........................................................Page 13
9. Declaration of conformity ..............................Page 15
10. Techniccal data...............................................Page 16
3
1. Introduction
Congratulations on your new Promovec Electric e-bike.
Promovec Electric is a whole new generation of e-bikes from
PRO-MOVEC designed and developed on the basis of our long
experience within the e-bike market.
Promovec Electric is manufactured according to the most recent
production technology, and we have put great emphasis on ensur-
ing a high quality standard. Promovec Electric has a strong frame
and a high performance as well as it is built to meet the Scandina-
vian climatic conditions.
Before you start using your e-bike we recommend that you read
the instruction manual, as it contains vital information concerning
use and maintenance of the e-bike.
In case you should have additional questions, please feel free to
contact your dealer.
Frame number:
Controllere by:
Delivery date:
4
2. Product description
Promovec Electric is the perfect choice if you are looking for an
e-bike for commuting and for casual riding that can increase
your mobility and give you excellent driving pleasure under all
conditions, no matter whether you drive uphill or in a strong
headwind.
Promovec Electric is available in different designs, some of
which come in both a man’s bike and a ladies’ bike. Thanks to
the step-through frame of the ladies’ bikes it is easy to mount
and get off.
The frame is made of aluminum in order to have a rigid and
strong construction as well as to maintain low weight. The motor
is built into the front wheel to obtain the best weight distribution.
The torque of the planetary gear motor is high with a powerful
performance sufficient to take you over longer uphill distances
without problems. Using the 7- or 8-speed gear you can always
find a gear suitable for your speed.
2.1 Frame number
The e-bike is provided with a frame number which can be found
under the crank.
5
3. Functions/settings
3.1 Battery indicator
The battery indicator is in-
tegrated in the LCD dis-
play on the handlebar. On
the indicator you can see
the approximate battery
level.
Please note that the battery level may vary depending on whether
you drive uphill or downhill.
3.2 Assist function
The assist function has 6 settings. By pressing the assist button
repeatedly you may choose the appropriate assist level.
As it is possible to adjust the assist level to actual need during
the ride, it is up to the driver to decide when help is needed and
how much.
The motor will disconnect at a speed of 24.6 km/h.
3.3 Gear lever
Shift the gear by turning the
gear lever placed in the right
handlebar.
Choose the appropriate gear
according to speed and wish.
The gear lever may vary depending on bicycle model. The above
photo shows the gear lever on Promovec Electric –Element.
6
3.4 Mantling and dismantling of the battery
Turn the battery key (ON/OFF) to open position and take the
battery out of the rack.
Mount the battery again by placing it in the rack and pushing it
forward into position. Then turn the key to lock the battery.
3.5 Mounting of battery charger
Insert the plug of the battery
charger into the battery.
You may charge the battery
while mounted in the e-bike.
You may also choose to dis-
mantle the battery and take it
indoor for recharging
7
3.6 Driving instructions
The auxiliary engine works as follows:
When the pedals are activated a sensor sends a signal to the elec-
tronic steering (controller) which then starts the motor.
The power of the auxiliary engine is adjusted according to the
chosen assist level. During the ride you may adjust the assist
level according to actual need.
If you drive uphill you may apply full power whereas when you
go downhill you may disconnect the motor.
The electronic steering will automatically disconnect the motor
when you stop pedaling. Likewise the steering will disconnect
the motor when your speed exceeds 24.6 km/h.
4. Highway code
The Promovec Electric e-bike is built according to the guidelines
of the EU standards EN 14764 and EN 15194.
There are no requirements in respect to a driving license, a
license plate or the use of a crash helmet.
When riding in the traffic you must observe the rules which apply
for cyclists. It is strongly recommended that you wear a cycle
helmet.
8
5. Insurance
When it comes to insurance an e-bike falls within the scope of a
conventional bicycle which is normally covered by your family
home insurance.
We do however recommend that you consult your insurance
agent to discuss specific insurance aspects of your e-bike.
6. Battery charger
6.1 Use of battery charger
1. Charging must take place indoors.
2. Turn the key to off position.
3. Put the plug of the charger into the socket of the battery.
4. Put the mains plug (230v) into the power socket and switch
on the charger.
5. The red diode will be on, as long as charging takes place.
6. When the diode changes from red to green, charging is com-
plete and the e-bike is ready.
7. Turn off the charger but do not remove it from the socket un-
til you are going to use the e-bike again.
6.2 Charging
The Promovec Electric e-bike uses maintenance-free Panasonic
Li-ION batteries. Please note, that the battery can be dismantled.
The charging capacity of the battery is only 40% when delivered
from the factory. Before commissioning it is therefore necessary
to charge the battery to full capacity using the enclosed battery
charger (Green diode is on).
9
In order to achieve maximum battery life and range of the e-bike
we recommend that charging takes place in a heated room. By
temperatures below 20ºC prolonged charging time must be ex-
pected, with the result that charging of the battery to full capaci-
ty cannot take place which again leads to reduced driving range.
Please note that the capacity of the battery will decrease when
temperatures fall below 20ºC.
Optimum battery charging conditions are at 20ºC. If the battery
is exposed to direct sunlight the battery life deteriorates consi-
derably.
When the battery is taken indoors for charging, condensation
may occur inside the battery as well as on the outside. Please
therefore do not start charging until the condensation has disap-
peared. The battery contains a printed circuit board that controls
each battery cell. If charging takes place while there is still some
condensation in the battery this printed circuit board may be
damaged.
Memory effect does not occur in Li-ION batteries. It is thus un-
necessary to discharge the battery before starting a recharge.
Charging of the Li-ION battery at many frequent intervals may
prolong the battery life. However, please note that once charging
of the battery has been started you should not discontinue the
process as this may have a negative influence on the battery life.
Rechargeable batteries must always be kept in dry conditions
and dismantled from any equipment.
Do not pull the wires when dismantling the charger from the bat-
tery. Grab hold of the plug and pull it carefully out of the battery.
Never leave the battery in the charger when the charger is off.
10
Never leave your battery in your Promovec Electric e-bike for a
longer period of time.
Please note that the capacity of the battery will weaken over time
and at lower temperatures. The more you use your e-bike the
more the capacity will decrease thereby affecting the range. Over
time the reduced battery performance will also be noticeable
when driving in a hilly countryside. The battery life will normal-
ly allow charging/discharing up to 600 times.
Please also note that periods with low temperatures will influ-
ence the capacity and thus the performance of the battery nega-
tively. This will change when the temperature increases to ap-
prox. 20ºC.
Other parameters of major importance for the performance/
range are user weight, driving manners, terrain, surface and tire
pressure. The user himself/herself may also influence the per-
formance/range depending on how much pedal power is used.
It costs only little to have the charger connected all the time, as
the charger will switch to standby when the battery if charged to
full capacity. However, the charger should not be connected for
more than max. one week. The battery should then be removed
from the charger and charging to full capacity should take place
once a month (full charge = green diode on charger is on).
6.3 Storage for the winter
If you put away your e-bike for a longer period (more than one
month), it will be sufficient to charge the battery once a month.
Before putting the battery away for storage you should make
sure that it is fully charged, as the battery will be damaged by
being left totally or partly discharged for a longer period.
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali Promovec Scooter
