www.proofvision.co.uk 4
Installation
Installation must be carried out by a qualified installer i.e. AV technician or electrician
• These screens will require 2 people to do any lifting as they are heavier than normal domestic
televisions.
• The installation of the cables must be carried out in a dry place and sealed tightly with the screws
provided on the inputs cover. If these screws are lost/damaged, please contact ProofVision to
arrange replacement.
• The VESA screws provided should be the only screws used with the ProofVision Outdoor TV, for
spares please contact ProofVision directly.
• Please ensure the wall and bracket/stand used for mounting can support the weight of the TV.
• The TVs top operating temperature is 60 degrees Celsius and the unit can reach this temperature
if exposed to direct sunlight while in use over a long period of time, so it is recommended to
factor this in when deciding install location.
Caution
Never tamper with any of the components, or any other adjustment controls not mentioned in this
manual. The LED panel used in this product is made of glass. Therefore, please take care it can break
when the product is dropped or applied with impact. When you are cleaning the panel, make sure
the power cord is pulled out from the plug receptacle. Then wipe the receiver with a dried soft cloth.
All technical work on the TV should only be performed by an electrician, due to the high voltage
power input.
32” 42” 55” 65” 75”
VESA standard 400x100mm 400x200mm 400x200mm 520x400mm 400x400mm
Weight 21kg 35kg 45kg 60kg 85kg
