ProScan PS35152 Manuale utente

Features

MnflAI.q" PS271_i7_ PS3h1_7_ P.hi_L_lj]j_

First-Time Operation

Detailed Operating Instructions

4-7 Remote Control (TV Functions)

8 Freeze and Zoom

8Channel Guide

9 Front Panel Controls

10 Video Menu

11 Audio Menu

12-13 Graphic Equalizer

14 Stereo Broadcasts and SAP

15 Expanded Stereo

16-17 Adjusting for Best Surround Audio

18 Setup Menu

Optional Accessories

34-35 Accessory Cables

35-36 Accessory OrderForm

37 Optional Speakers and Stands

19 Using Closed Captioning

20 Sleep Timer

21 Alarm

22 Labeling Channels

23 Parental Control

24 Programming Channel Memory

25 Changing Antenna Input

26 Setting up VCR Channels

27 Setting up Cable Box Channel

28-29 Operating Picture-in-Picture

30-31 Programming Remote to Control VCRs

32-33 Programming Remote to Control Audio Equip.

Monitor Panel and Connections

38-39 Monitor Panel

40 Tips to Read Before Connecting Components

41 Home Antenna Connections

42-43 Cable-TV Connections

44 Programming Remote to Control Cable Box

45 Cable-TV Information and Channel Chart

46-47 VCRConnections

48-49 CamcorderConnections

50-51 Amplifier orCassetteTape Deck

52-53 ExternalorSurround Speakers

Reference Section

54-55 Trouble Checks

55 Warranty

56 Design Specifications

56 Cleaning and Care

57 Index (Alphabetical)

58-59 Quick-Reference Guide (Inside Back Cover)

If you suspect that liquid has entered the TV, unplug it imme-

diLatelyand have it inspected by an Authorized TV

Servicenter. Turning it off is not enough - your TV has power

applied to some circuits even when the TV is turned off.

The lighting Dash

and arrowhead

within the triangle is

a warning sign

alerting you of

"dangerous vokage"

inside the product

that presents arisk

of electric shock.

RISK OFELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK

OF ELECTRICAL SHOCK, DO NOT

REMOVE COVER (OR BACK). NO

USER-SERVICEABLE PARTS

INSIDE. REFERSERVICING TO

QUALIFIED SERVICE PERSONNEL.

The exclamation

point within the

_angle is a warning

sign alerting you of

important

ins1_c_ons

accompanying the

product.

Caution: Maintain electrical safety. Powerline-operated

equipment or accessories connected to this unit should bear

the UL listing mark or, if purchased and used in Canada, the

CSA certification mark on the accessory itself and should not

have been modified so as to defeat the safety features. This

will help avoid any potential hazard from electric shock or

fire. If in doubt, contact qualified service personnel.

Your TV operates on 120 volts, 60 Hz AC power (normal

house power) and has a polarized AC plug. Because one

blade of the plug is wider than the other, the plug fits into the

wall socket only one way. Do not defeat the safety feature of

this plug. If you need an extension cord, make sure it is polar-

ized.

Caution: To prevent electric shock, do not use the

polarized plug on this TV with an extension cord,

or other outlet unless both blades can

y inserted to prevent blade exposure.

Match wide blade of plug to wide slot, fully insert.

Mise En Garde: Pour prrvenir les chocs 61ec-

triques, ne pas utiliser la fiche polarisre de cet

appareil avec une rallonge, une prise de courant ou

une autre sortie, _ moins que les lames ne puissent

61:reinsrrres h fond sans qu'aucune partie ne soit laissre

d,Scouvert. Introduire la lame la plus large de la fiche dans la

borne correspondante de la prise et pousser jusqtl au fond.

i_dl operating controls and their functions are identified and

explained in this manual. For warranty service or routine

rrtaintenance, contact the nearest Authorized ProScan TV

Servicenter. All servicing and adjustments to electrical com-

panents should be done by a qualified service technician.

'Warning: To prevent fire or shock hazard, do notexpose this TV to rain or moisture.

_!ilii!iiii

i_ii[iiii!i:

i:r{i}:iiiii

:rii!iiii..i

iiiliiii

i;i!ii}{ii{i:i

:ii:ii!-:

iiiii!ii_

iiiiiiiii_i_il

!i!%i_

iii!_;ii_;

ii:i!:i_il

iiiiii{}!ii

!i_ii!i_:iii

iii:i}ii

)}::

r_r }:

iiiiiii!iii:i!:

Note to Cable "IV Installer: This reminder is provided to call your attention

to Article 820-40 of the National Electrical Code (Section 54 of the Canadian

Electrical Code, Part 1) which provides guidelines for proper grounding and,

in particular, specifies that the cable ground shall be connected to the ground-

ing system of the building as close to the point of cable entry as practical.

Mail YourRegistrationCardToday

AProduct Registration Card is packed with your set. Please

fill out the card and return it immediately.

Your prompt submission of this card allows us to contact you

if needed.

If you did not receive a Product Registration Card, please

contact your dealer.

AttachYourSales ReceiptHere andFileat HomeForFuture

Reference

To obtain warranty parts and service, you must show your

sales receipt (or other evidence of purchase) to your

Authorized ProScan TV Servicenter.

Do not mail your sales receipt to us. File it at home with your

owner's manual for future reference.

RecordVital InformationHere

No other set has the same serial number as yours. You will

find the serial number and the model number on the back of

your set.

Make sure you record both numbers below so that you will

have them in case your set is stolen or if you need a complete

description for identification.

Model Number:

Serial Number:

Purchase Date:

Dealer Name/Address/Phone:

VideoMenu

Main Menu

AudioMenu

-=1-- Stereo/SAP/Mono

Hall/Stadium

Repeatedly press

MENUto select from

main menu and then

press + or - to display

the selected menu.

When one of the

menus shown at the

right appears, repeat-

edly press MENUto

select the function

you want to adjust,

then press + or- to

adjust it.

SetupMenu

C_k Set -Hr +Min

ptions1/

Captions2]

Text 1/'rext2

I]Erased

;hannel Number

PROSCAN°

So advanced. Yet so simple. _

We're building our reputation on products that are so

advanced, they're simple. If you want all the benefits of

the latest technology, without the complexity, we have a

very simple solution.

It's called ProScan. State-of-the-art technology that real

people can use.

Thank you for choosing ProScan. And welcome to our

company-wide commitment to your complete satisfaction

and viewing enjoyment.

Your ProScan television is more than state-of-the-art

technology. It's technology tailored to you. Features

designed to deliver viewing and listening enjoyment

beyond expectations. Innovation and simplicity of

operation become one-ProScan.

ImprovingYourImage

• ABrighter Picture: Theadvancedlnvaralloy maintains excellent

color purity under the brightest power conditionsto allow formore

light outputthan conventionaltubes.

• No Glare" Picture: Anti-Glare Lithium Silicate Faeeplate

reducesglarewhileenhancing contrast.

•A Cleaner Picture: The Digital Comb Filterreducesdistortion

and'extends resolution.

• Greater Contrast: DynamicGammaCorrection automatically

extendsthe dynamic rangeof the luminance signal, producing

blacker blacks and whiterwhites.

•Increased Clarity: Scan VelocityModulation and a wide band

video amplifier enhance imageedges, and with DynamicBeam

Focus,provide crisp clean details-with atleast560 linesof

horizontal resolution, surpassing the capabilitiesofall available

consumer signal sources.

• A Cleaner Picture Tube: The Anti-StaticFaceplatereducesthe

staticthatattractsdust.

Sound Thinking

• Dolby* Surround Sound recreates the audio experience of a

movie theater by decoding the surround sound signal on most pre-

recorded VHS/hi-fi tapes (with optional speakers). For details, see

pages 16-17.

•Acoustic Suspension Speaker System sealed enclosures and high

compliance speakers provide higher fidelity and extended bass

response.

•On-Screen Graphic Equalizer permits precise adjustment of

seven frequency bands to complement your room's acoustics.

For details, see pages 12-13.

• 10 Watts Per Channel **

•dbx*** Noise Reduction

•Second Audio Program (SAP) For details, see page 14.

* Dolby is aregisteredtrademark of Dolby LaboratoriesLicensing Corp.

** RMS rating,into 8 ohms, 50 to 20,000 Hz ±3db, with less than

1% THD.

***dbx is a registered trademark of Carillon Electronics Corp.

Creative Entertainment

•Advanced Color Picture-in-Picture lets you watch two programs

at once (with VCR).

SWAP, MOVE, FREEZE -for viewing convenience.

CHANNELGUIDE- displays a still picture of 12 channels at one time

for a quick review of available programs.

PtXZOOM- enlarges any desired video image for a closer look.

PIXPAN-lets you move across the enlarged video image to select

any portion for viewing.

For details, see pages 8 and 28-29.

•Channel Captioning lets you label channel numbers with up to

4-letter names (NBC, VH-1, ESPN). For details, see page 22.

• 181 Channel capability in U.S.A. - Cable Compatible* For

details, see page 45.

•Commercial Skip For details, see page 6.

• Sleep Timer For details, see page 20.

• Alarm Timer For details, see page 21.

•Parental Control For details, see page 23.

•Previous Channel Control For details, see page 7.

*Check your cable company's compatibility requirements.

Channels 95, 96, and 97 are not applicable in Canada, so the total chan-

nel count for Canada is 178.

OneMinute Manual

•On-Screen Menus for simple operation of picture, sound, and

set-up functions by remote control. For details, see pages 10, 11,

and 18.

.* AutoProgramming automatically searches for and stores all

active channels. Eliminates the need for manual set-up. For

details, see page 24.

•Frequency Synthesis Tuning automatically and accurately tunes

each channel.

• Automatte VCR Setup with the push of a button, your TV is

ready for VCR play: both "IV and VCR turn on and TV tunes to

correct channel/input. For details, see page 26.

• Automatic Cable Box Setup offers convenience when cable com-

pany requires you to use cable box. For details, seepage 2Z

• On-Screen Clock/Channel Display For details, see page 3.

• Picture Reset For details, see page 10.

Networking

Gold Plated Phono Jacks for Superior Performance:

•Two Sets of Audio/Video Inputs for VCR, Laser Disc player,

Camcorder etc. For details, see pages 46-48.

• One Set of Audio/Video Outputs for video dubbing. For details,

see pages 47 and 49.

• One Set of Volume-Controlled Audio Outputs (141-FI)to retain

remote volume when connected to an external amplifier. For

details, seepage 50.

• One Set of Volume-Controned SURRAuto Outputs to connect

the surround sound to an external amplifier. For details, see

page 51.

Other Connections to ExpandYour System:

• S-Video input connector for directY/C input to your S-VHS

VCR,Camcorder, etc. For details, seepages 47 and 48.

•Four Speaker Jacks to allow hook up of optionalexternal or

surround sound speakers. For details, see pages 52-53.

•Dual RF Inputs to allow direct connection of up to two basic

cable, cable box, or other RF sources. For details, see pages 41-

43.

• Front-Mounted Stereo Headphone Jack forprivate listening

with optional headphones. For details, see page 9.

At YourCommand

Your ProScan television includes two remote controls.

•The ProScan Universal Remote is preprogrammed so there's no

need to teach additional or new codes. Operation is as easy as

entering a channel. It operates all major ProScan TV and VCR

functions. Operates the basic functions of 60 different VCR

brands and 28 different brands of cable boxes, eliminating the need

for additional remotes.

•The ProScan Simple Remote-6 buttons control everyday 'IV

functions for the ultimate in simplicity.

AtYourService

Our Human Touch policy offers all these valuable

benefits:

• 1-800-PROSCAN Call at any timeour 24-hour-a-day, 7-day-a-

week information service.

• Nationwide Independent Service Centers

•ProScan Limited WarrantyforU.S.A. In-homeserviceof all

partsand labor foroneyear,picturetube fortwo years. For

details, seepage 55. AseparatewarrantyforCanadais enclosed

with alltelevisionssoldinCanada.

__._!

The steps below will help you get your TV connected and

working quickly. The page numbers on which you can find

detailed instructions for each of these steps are also listed

for your convenience.

UnpackTV and accessories.

The accessories that came packed with your TV include

two remote controls, six AAA batteries, power cord, and

antenna adapter.

-- TV Button

B,NNELButtons

Buttons

2 Connectantennaorcable-TV system.

Most antenna or cable-TV systems can be connected as

shown here.

///.

//// '////

"///

lacond_lCai4e

h'omAMmumor

Cable-W SYstem

_dw , cMe.J_VnnnlA

•=',:_i/:,:];:__.'- _trA

•Details for connecting a home antenna to your TV are on

page 41.

•Details for connecting a cable-TV system to your TV are

on page 42-43.

•Details for connecting a VCR to your TV are on

pages 46-47.

Attach power cord.

First attach the flat end of the power cord completely into

the connector on the back of your TV, and then plug the

other end into a wall outlet.

Be sure to insert the plug completely.

DoThis NotThis

4 Install batteries in remotecontrols.

Details are on page 4.

5 TurnonTV,adjustthe volume,and select a channel.

To turn on the TV, press the TVbutton on the master

remote or press the POWERbutton on the simple remote.

When using the remote, remember to point it at the

front of the TV.

2Press the VOLUMEup or down button to adjust the vol-

ume to a desired level.

Press the CHANNELup or down button to select the next

channel in memory. You can also press two number

buttons to select a channel. Channels 2-13 and 91 were

programmed into the channel memory at the factory, so

pressing CHANNELup or down stops at these channels

only. When you start the autoprogramming feature

(described next), your set will automatically scan

through all channels and place the active channels for

your area into its channel memory.

AdjustPICTURETILTswitches ifnecessary.

Select models have an extra large color

picture tube. The effects of geomagnetism

(Earth's magnetic field) may cause the il

Make sure the STRENGTHswitch is in the OFFposition as

the diagram shows.

2Move the STRENGTHswitch to the LOWposition. If this

improves the tilt but it is still not satisfactory, move the

STRENGTHswitch to the HIGHposition. This should cor-

rect the situation. If moving the STRENGTHswitch makes

the tilt worse, go to the next step.

3Change the position of the POLARITYswitch. If this

improves the tilt but it is still not satisfactory, move the

STRENGTHswitch to the HIGHposition. This should cor-

rect the situation.

You may need to reset the POLARITYand STRENGTHswitches

if the TV is moved or repositioned in the room, especially

if the TV will be facing a different direction.

picture to tilt slightly. The POLARITYand

STRENGTHswitches on the back of the TV

let you compensate for this effect. If the

picture appears tilted, follow these steps to

improve it.

7Setthe clock.

1Repeatedly press the MENUbutton to select the SETUP

MENUand then press +. Press MENUrepeatedly again to

select the CLOCKSETdisplay.

Press and hold the -button to select the correct hour.

Then press and hold the + button to select the correct

minute.

The correct time will now appear on the screen whenev-

er you change channels or press the DISPLAYbutton.

Note: If power is interrupted for an extended time, you will need

to reset the clock.

8 Review menus.

To see the video

menu, repeatedly

press MENUbutton to

select VIDEO MENU and

then press +.

Repeatedly press

MENUto select desired

function and then

press +or - to adjust

it. Details are on

page 10.

@-- ÷

To see the audio menu repeatedly press MENUto select

the AUDIOMENUand then press +. Repeatedly press

MENUto select desired function and then press +or - to

adjust it. Details begin on page 11.

To see the setup menu,

repeatedly press MENU to

select SETUP MENU and

then press +. Repeatedly

press MENUto select

desired function and then

press + or - to adjust it.

Details begin on page 18.

Labelchannelsif desired.

The labeling feature lets you add names (or labels) to

channels as desired.

To label a channel, repeatedly press MENUto select the

SETUPMENUand then press +. Repeatedly press MENU

to select the CHANLABELdisplay, and then press + to

enter the function.

2Select the channel number you want to label.

Repeatedly press VOLup or down on the remote control

to select the desired character, and then press + to move

to the next character block. When the first name is fin-

ished, you can select another channel to label. Details

are on page 22.

10 Review otherfeatures.

Later, after you feel comfortable with your TV and remote

control, you can review the detailed control descriptions

and special features covered in this manual.

You can also use the rest of this manual as a reference

guide to review detailed information about each operating

control and function. The alphabetical index in the back

will help you quickly locate desired information. A quick-

reference operating guide is also printed inside the back

cover for your convenience.

OperatingRemoteControls

Before attempting to operate either one of the remote controls,

install the batteries as shown below.

Installing/ReplacingBatteries

1Turn each remote control face down.

2Press down on the ridged area of each battery cover and slide

them off.

EffectiveRangeofRemoteControls

Aim either remote control at your TV's remote control sen-

sor. The remote controls produce an invisible (infrared)

beam that travels in a straight line much like the beam of a

flashlight. For this reason, when operating either one of the

remote controls, you must point it directly at the front of the

TV without objects between that can block the infrared light

beam.

Aimremoteatyour]V's

remotecontrolsensor.

3Install the "AAA" batteries in each compartment as shown.

4Replace the covers and turn remotes over (face up).

Notes: Replace the batteries when the TV fails to respond to the remote

control.

If you programmed your master remote to control other components, you

may have to reprogram the code numbers when you change batteries.

Try not to press any buttons while changing batteries.

Never place anything heavy on top of the remote control or lay it upside-

down. This may accidentally depress the buttons for a long time and dis-

charge the batteries.

SimplifiedRemote

This remote can be used to operate the basic functions of

your TV. POWERBUTrON

•Turns TV on and off.

CHANNELBUTTONS

Press CHANNELup to select next higher

channel in memory or press CHANNEl.down

to select next lower channel. You can add

and erase channels in memory as desired.

Details are on pages 24.

..... VOLUMEBUTTONS(ALSO+AND- BUTTONS)

Press+ toincreasevolume and press- to

decrease volume.

Also use these buttons after you have

pressed the MENUbutton to enter or adjust

functions. Details begin on page 10.

MENUBUll'ON

Press MENUrepeatedly until the menu you

want to display is selected, then press +or-.

Next press MENUrepeatedly to select the

function you want to adjust and then press +

or - to adjust the setting. Details begin on

page 10.

Basic Operation Theory (for master remote control)

Step 1

ComponentButtons

First press one of these five component buttons to tell the remote control which

component you want to control. You can program the VCR1,VCR2,CABLE,or AUDIO

buttons to control most brands of equipment.* .....

Step 2

Then press the OFF/ONbutton to turn on or

off that component.

Note: The TV and some other components will

automatically turn on when you press the button in

Step 1.

Step 3

FunctionButtons

These function buttons can now be used to

control the basic functions of the compo-

nent you selected in Step 1. To control a

different component, first press its compo-

nent button (VCR1, VCR2, CABLE, AUDIO, or

rv), and then press the desired function

button.

Note: Not all components have functions that can be

controlled by these buttons, but you can experiment

with your particular component to discover exactly

which buttons will control it.

0. 0 • •

*The rv button automatically controls your TV-no additional programming is required.

• Details for programming the VCR1and vca2 buttons to control VCRs are on page 31.

•Details for programming the AUDIObutton to control audio equipment are on page 32.

• Details for programming the CABLEbutton to control cable boxes are on page 44.

The ProScan universal remote that came packed with

your TV also controls most brands of VCRs and cable-

TV boxes.

The remote control is easy to use. The buttons shown

below can be used to operate your TV. The rest of the

buttons are used to control VCRs, audio equipment, or

cable boxes and are explained on pages 30, 33, and 44.

For added convenience, the simplified 6-button remote

also lets you control the basic operation of the TV

(shown on page 4).

(_) OFF/ONBUTrON

(_) NUMBERBUTrONS

QCOMMERCIALSKIPBU'I'FON

(_ INPUTBUTFON

+AND - BU'rFONS

(_) MENUBU'I'rON

QANTENNA BUII'ON

QPIP(PICTURE-IN-PICTURE)BU'I'FONS

(_ Z00M IN/OUT BU'I'rONS

CHANNELGUIDEBUTTON

(_) FREEZEBUTrON

_TV BU'I-rON

1_ CHANNELBUTTONS

(_) VOLUMEBUTFONS

(_) PREVIOUSCHANNELBU'I'rON

MUTEBUII'ON

_--_) CLEARBUII'ON

1_) DISPLAYBU'i'I'ON

1_ SURROUNDBu'rr0N

(_ ARROWBUTr0NS

OFF/ONBU'I'rONturns off the TV.

NUMBERBuTroNslet you select channels directly instead

of using the CHANNELbuttons. Always press two number

buttons (first one, then the other) to select a channel. For

example, press 0 then 6 for channel 6.

To select a 3-digit cable channel (like 127), press and

hold number button 1 until "1 - -" appears on the screen.

Then press the other two numbers. Your TV will tune up

to cable channel number 128 when the CABLE/AIRfunction

is set to CABLE.Check with your cable company to deter-

mine which channels are available in your area.

COMMERCIALSKIPBUTTON

Use this button when you want to scan other channels

during a commercial break. When a program break

occurs, press cs once before changing channels. The TV

will count down 30 seconds on the screen and then auto-

matically switch back to the original channel you were

watching.

Press cs twice if you want the TV to count down 60 sec-

onds. Each additional press will add another 30 seconds

to the count-down time (up to five minutes) and then

each additional press will add another 60 seconds to the

countdown time (up to 60 minutes).

To cancel, press CLEAR.The countdown clock will disap-

pear from the screen, and the TV will stay tuned to the

channel it was on when you pressed CLEAR.

(_) INPUTBUTr0Nlets you quickly view signals from the

iNPUTjacks. Pressing this button switches the TV from

its current channel directly to channel 90, then channel

91, then channel 92. Channel 90 lets you see the signals

coming from a device that is connected to the S-VIDEO

connector. Channel 91 accesses the iNPUT1jacks and

channel 92 accesses the INPU'r2jacks.

Questo manuale è adatto per i seguenti modelli

Altri manuali ProScan Monitor

ProScan

ProScan PS35310 Manuale utente

ProScan

ProScan Proscan MULTIMEDIA MONITOR Manuale utente

ProScan

ProScan PS27123 Manuale utente

ProScan

ProScan 80 Series Manuale utente

ProScan

ProScan PS36810 Manuale utente

ProScan

ProScan PS35652 Manuale utente

ProScan

ProScan Proscan MULTIMEDIA MONITOR Manuale utente

ProScan

ProScan PS27108 Manuale utente

ProScan

ProScan PS34190 Manuale utente

ProScan

ProScan PS20112 Manuale utente

Manuali Monitor popolari di altre marche

Linear Acoustic

Linear Acoustic LQ-1000 Manuale utente

AOC

AOC I2579V Manuale utente

Gateway

Gateway FPD1520 Manuale utente

Furuno

Furuno Mu 120c Manuale utente

Asus

Asus VB171D - 17" LCD Monitor Manuale utente

Dell

Dell S2230MX Istruzioni utente

Philips

Philips 107C64 Manuale utente

Dell

Dell S2409WFP Manuale utente

EverFocus

EverFocus EN-7517E Manuale utente

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuale utente

Dell

Dell Precision 7680 Manuale di istruzioni

LG 50PM1M - - 50" Plasma Panel Manuale utente

Bosch

Bosch DDU 9 Manuale utente

Acer

Acer A231HL Manuale utente

Philips

Philips 86BDL4152T Manuale utente

NEC

NEC AccuSync LCD5V Manuale utente

Emay

Emay SleepO2 Manuale utente

IBM

IBM 6360 Istruzioni per l'installazione