ProScan PSB3787W Manuale utente
MODEL:
HOME THEATER BLUETOOTH SOUNDBAR WITH WIRELESS SUBWOOFER
LIGHT SHOW AND LED ROOM ILLUMINATION
PROSCAN™ IS A REGISTERED TRADEMARK OF TECHNICOLOR USA INC.
AND USED UNDER LICENSE TO CURTIS INTERNATIONAL LTD.
PLEASE READ CAREFULLY BEFORE OPERATION
37 inch Bluetooth Soundbar with Wireless Subwoofer
PSB3787W
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
UNIT TO RAIN OR MOISTURE.
WARNING: USE UNDER SUPERVISION OF AN ADULT DUE TO LONG CORD
This unit has a long cord that can be easily tripped on or pulled on, causing injury. Please
make sure it is arranged so that it will not drape over a tabletop, etc. Where it can be
pulled on by children or tripped over accidentally.
CAUTION: TO REDUCE THE ELECTRIC SHOCK, DO NOT REMOVE THE
COVER (OR BACK). NO USER SERVICEABLE PART INSIDE, REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
DANGEROUS VOLTAGE:
The lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons..
2
Industry Canada Notice
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation,
Science and Economic Development Canada’s licence-exempt RSS(s). Operation is
subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
ISED RF Exposure statement
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled
environment. In order to avoid the possibility of exceeding the ISED radio frequency
exposure limits, Human proximity to the antenna shall not be less than 20 cm (7.9 inches)
during normal operation.
ATTENTION:
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing) instructions
in the literature accompanying the appliance.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
●Reorient or relocate the receiving antenna.
●Increase the separation between the equipment and receiver.
●Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
●Consult the dealer or an experienced radio/TV technician for help.
FCC WARNING:
To assure continued operation, follow the attached installation instructions and use only
shield cables when connecting to other devices. Changes or modifications not expressly
approved by the party responsible for compliance could void the user's authority to operate
the equipment.
FCC NOTICE:
3
FCC STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may
cause undesired operation. The antenna(s) used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all persons and must not be co-located
or operating in conjunction with any other antenna or transmitter.
CALIFORNIA PROP 65 WARNING:
This product contains chemicals known to the State of California to cause birth defects
or other reproductive harm. For more information on these regulations and a list of
chemicals, log on the following website: http://www.oehha.ca.gov/prop65.html
This product meets and complies with all Federal regulations.
The appliance should not be used near water; for example, near a bath tub, washbowl,
kitchen sink, laundry tub, in a wet basement, or near a swimming pool.
6. Clean only with dry cloth
The appliance should be cleaned only as recommended by the manufacturer.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet and in the back or bottom are provided for ventilation, to
ensure reliable operation of the product and to protect it from overheating. These openings
must not be blocked or covered. The openings should never be blocked by placing the
product on a bed, sofa, rug, or similar surface. This product should never be placed near or
over a radiator or heat source. This product should not be placed in a built-in installation,
such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s
instructions have been adhered to.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A grounding type plug has
two blades and a third grounding prong. The wide or the third prong are provided for your
safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments / accessories specified by the manufacturer.
12. An appliance and cart combination should be moved with care.
4
Quick stop, excessive fore and uneven surfaces may cause the
appliance and cart combination to overturn.
1. Read these instructions
All the safety and operating instructions should be read before the appliance is operated.
2. Keep these instructions
The safety and operating instructions should be kept for future reference.
3. Heed all warnings
All warnings on the appliance and in the operating instructions should be adhered to.
4. Follow all instructions
All operation and use instructions should be followed.
5. Do not use this apparatus near water
13. Unplug this apparatus during lightning storms or when unused for long periods of
time. To protect your product from a lightning storm, or when it is left unattended and unused
for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable
system. This will prevent damage to the product due to lightning and power-line surges
14. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
15. Power source
This product should be operated only from the type of power source indicated on the
marking label. If you are not sure of the type of power supply to your home, consult your
appliance dealer or local power company. For products intended to operate from battery
power, or other source, refer to the operation instructions.
16. Power lines
An outside antenna system should not be located in the vicinity of overhead power lines or
other electric light or power circuits, or where it can fall into such power lines or circuits.
When installing an outside antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them might be fatal.
17. Overloading
Do not overload wall outlets and extension cords as this can result in a risk of fire or electric
shock.
18. Object and liquid entry
Never push objects of any kind into the product through openings as they may touch
dangerous voltage points or short out parts that could result in fire or electric shock. Never
spill or spray any type of liquid on the product.
5
19. Service
Do not attempt to service this product yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all servicing to qualified service
personnel.
b) If liquid has been spilled or objects have fallen into the product.
c) If the product has been exposed to rain or water.
d) If the product does not operate normally by following the operating instructions. Adjust
only those controls that are covered by the operating instructions, as an adjustment of
other controls may result in damage and will require extensive work by a qualified
technician to restore the product to its normal operation.
e) If the product has been dropped or the cabinet has been damaged.
f) When the product exhibits a distinct change in performance- this indicates a need for
service.
20.Replacement parts
When replacement parts are required, be sure the service technician uses replacement
parts specified by the manufacturer or those that have the same characteristics as the
original parts. Unauthorized substitutions may result in fire or electric shock or other
hazards.
21. Safety check
Upon completion of any service or repairs to this product, ask the service technician
to perform safety checks to determine that the product is in proper operating condition.
22. Wall or ceiling mounting
The product should be mounted to a wall or ceiling only as recommended by the
manufacturer.
23.Damage requiring service
Unplug this product from the wall outlet and refer service to qualified service personnel
under the following conditions.
a) When the power- supply cord or plug is damaged.
PROdUCT OvERvIEW
6
CONTROL PANEL
FRONT VIEW
BOTTOM VIEW
3
4
5
78
REAR PANEL
11
10 12 13 14
2. Remote Sensor
1. Source Indicator
3. LED Light Tube
5. Volume Down Button
6. Volume Up/REC. Button
4. Power/Source Button
7. Previous Button
8. Next Button
9. SB Pair Button
12. OPTICAL IN Jack
10. LINE IN Jacks
11. AUX IN Jack
14. DC IN Jack
12
POWER
SOURCE
SB
PAIR
LINE IN
L
ROPT IN DC 20V
USB
AUX IN
6
9
13. USB Port
33
SUBWOOFER
INDICATOR
POWER
INDICATOR
PAIR DC 20V
15
16
17 18 19 20
15. LED Light Tube
16. Speaker
17. Indicator
18. Power Indicator
19. PAIR Button
20. DC IN Jack
REC.
Fig.2 Fig.3
BATTERY INSTALLATION OF REMOTE CONTROL
First time use
Remove and discard the insulation film as Fig.1.
Replacing battery for Remote Control
7
REMOTE CONTROL
1
2
3
4
5
6
7
8
9
10
12
1. (Power On/Off) Button
2. AUX Button
3. LINE IN Button
4. (Previous) Button
6. (Mute) Button
12. (Next) Button
13. Play/Pause Button
14. (Volume Up/Down) Button
10. REC. (USB Recording) Button
OPEN
OPE N
1. Pull out the battery holder as Fig.2.
2. Replace the old button cell with a new CR2025 button cell
with the polarity markings facing upward as Fig.3.
3. Push back the battery holder as Fig.4.
Fig.4
14
8. BT Button (Bluetooth mode)
9. OPTICAL Button
5. Sound Mode (MUSIC, TALK,
MOVIE, STANDARD)
7. (Light Effect) Button
11
11. USB Button
13
,
Fig.1
9
8
BATTERY PRECAUTIONS
Follow these precautions when using a battery in this device:
1.Use only the size and type of battery specified.
2. Be sure to follow the correct polarity when installing the battery as indicated in
the battery compartment, a reserved battery may cause damage to the device.
3. Do not mix different types of batteries together ( e.g: Alkaline and Carbon-zinc )
or old batteries with fresh ones.
4. If the batteries in the device are consumed or the device is not to be used for a long
period of time, remove the batteries to prevent damage or injury from possible leakage.
5.Do not try to recharge the battery as it is not intended to be recharged; it can
overheat and rupture. ( Follow the battery manufacturer's instructions.)
6.The batteries shall not be exposed to excessive heat such as sunshine or fire.
7. Clean the battery contacts and also those of the device prior to battery installation.
8.The remote control is supplied with a coin/button
cell battery. If the coin button cell battery is
swallowed, it can cause severe internal burns in just
2 hours and can lead to death. Keep new and used
battery away from children. If the Battery
compartment does not close securely, stop using
the product and keep it away from children. If you
think batteries might have been swallowed or placed
any part of the body, seek immediate medical
attention.
CR2025
Remote control operation range
●
●When direct sunlight, an incandescent lamp, fluorescent lamp or any other strong light
shines on the REMOTE SENSOR of the sounbar, the operation of the remote may be
unstable.
CAUTION
●Danger of explosion if the battery is incorrectly replaced.
●Replace only with the same or equivalent type.
16.4 Feet (5M)
When there is an obstacle between the transmitter and the sounbar, the unit may not operate.
PLACEMENT AND MOUNTING
1. Placing the device on a table - Ventilation
2. The Installation Distance
2-3inches
2-3inches
9
2-3inches
2-3inches
873mm (34.4inches)
When placing the sounbar and the subwoofer on an entertainment center, bookshelf, or
any type of enclosed space, be sure to allow enough space for ventilation. Otherwise, the
heat generated will produce potential heat hazard.
LINE IN
L
ROPT IN DC 20V
USB
AUX IN
Indice
Lingue:
Altri manuali ProScan Sistema di altoparlanti
Manuali Sistema di altoparlanti popolari di altre marche
Sondpex
Sondpex Active Speaker System and Digital Music... Manuale utente
JVC
JVC NX-PN7 Manuale utente
Marshall Amplification
Marshall Amplification AR-DM61-BT Manuale utente
Yamaha
Yamaha NX-A01 - Speaker Sys Manuale utente
SE Audiotechnik
SE Audiotechnik I-LINE Manuale utente
Gemini
Gemini WRX-843 Series Manuale utente