ProScan PLT7035 Manuale utente
Attention:
This handbook contains important security measures
and the correct use of the product information, in order to
avoid accidents. Please make sure to reading the manual
carefully before use the device.
zPlease don’t be in high temperature, moisture or
very dust place
zPlease don’t be in high temperature, Especially in
summer don't put the device in the car when
Windows closed.
zAvoid fall or Violent collision of the device, don’t
make the TFT display screen were violent tremor,
This could cause TFT display screen abnormal or
damage.
zPlease choose the appropriate volume, Use
headphones should not be too big volume, If feel
tinnitus, Lower the volume or stop using it
zplease charge In the following condition.
A. The battery power ICONS shows have no power
B. The system automatically shut off, startup after
power off soon
C. Operation buttons no response
D. The machine that the top right corner show red icons
zWhen the device in the format or ongoing upload
and download file, please don't suddenly disconnect,
This could cause application error.
zFor those who because of damage to the product,
repair, or other causes of erased the memory, The
company shall not be liable for any responsibility,
please follow the user manual for the standardized
operation to use the device.
1
zDon’t disassemble the product, don’t use alcohol、
Thinner or benzene to scrubbing products
zUSB just only be used for data transmission
The company reserves the right to improve produ
ct,products specification and design have any change,
The information is subject to changes without priornoti
ce.
【Remark】All pictures in this manual is just for y
our reference.
1.Appearance and button:
2
1.1. DC Socket
When device lower battery, please connect to DC
charger 5V/1.5A.
1.2. Mini USB
Use it to connect the computer for data transmission,
charging and external connection USB flash drive
1.3. Power
Startup: Long Press and hold the power button, the
system will enter the main interface
Shutdown: In the main menu interface, Press the power
button about 5 second to shutdown, The system can hint
"power off" option, Clike "ok". you can safely shut down.
Lock screen: Short press Power button to lock screen or
unlock screen.
Remark:
1).When power is empty, system will shut down
3
automatically.
2).Illegal turn off the device, restart will scan and restore
the disk, it may take longer time to enter into system
1.4. Volume -
The button “-” reduce the Volume
1.5. Volume+
The button “+” increase the Volume
1.6.Camera
Camera for picture and video.
1.7.Earphone Socket
3.5 mm standard earphone socket
1.8.Microphone
Built in hi-quality microphone
1.9.Touch Panel
7” Capacitive touch panel: In The Operation, to click,
dragging on the touch panel
1.10.TF card
External T-FLASH card up to 32GB
1.11.Reset
When the Tablet under the condition of the crash, use
the small objects to short press RESET button, Tablet will
force to shutdown.
【Remark】: unless unable to shutdown, otherwise
don’t use the reset, suggest you to shutdown by normal, if
no will easy to damage the machine system.
2. First use
2.1 Battery management and charge
Before first use, please set the device's battery is fully
charged
4
Just need to connect the adaptor to charge
The first two times charging please keep about 6
hours, after that you just need 4 hours to charge.
【Remark】: This tablet using Built-in type polymer
battery, Charge must be to choose standard adaptor (Input:
AC100~240V 50/60Hz Max:180MA. Output: DC5V/1.5A),
this device without supply DC charging, USB interface can
charge, Choose USB interface to charger
During the charging, the battery icon will scroll
When finished charging, battery icon will become
green and stop rolling
In order to prolong the service life of the machine,
suggest use out battery power before charge it
【Remark】: 1. If you long time don’t to use this Tablet,
in order to avoid power consumption caused damage, pls
charge/play the battery once a month.
2、After low battery shut down, connect DC adaptor,
device will remind low battery, charging, need to wait
some time until the battery is enough power to enter into
main menu.
3. Device charging should be in standby status for
reach normal charging time.
Because with device and screen consumption, it may
cause longer charging time.
2.2 Connection with PC
Use USB cable to connect device to PC, device will
pop up the USB connection window, click Turn on USB
storage to connect to PC
5
Into the load mode, you can copy, delete the file on
the device and the file on the memory card.
3. Equipment operation interface
3.1 Main interface describe
After startup will enter the main interface
6
In the main interface, you can :
Management main interface software ICONS: long
press the icons 3 second,after the icons will bigger, then
you can drag anywhere in the interface.
Delete icons: long press the icons 3 second, drag the
icons to the Recycle Bin icon, once it become red, Loosen
your hand, after that you can delete icon
You touch the screen keep a time, appear the dialog
box “Add you Home screen” as shown below:
7
3.2 status bar describe
The status bar above of the screen
Top left display main interface software, T-Flash card, USB
connection status and so on
Top right display the battery, battery charge icons,
current time, set time, Settings Menu, ESC button.
3.3 Use touch panel
Device equipped with a 7 “ touch screen. Following
the main touch screen area is described, and describes
some of the tips for how to use the touch screen.
No matter which interface you are on the screen, can
8
go back to main screen through pressing the soft key
on the bottom right corner of the main screen.
【Attention 】The main screen soft key
functions as the machine back key
In different applications, by tapping the back soft key
on the bottom right corner on the touch screen, you
can return to its interface on the up floor.
In different applications, by tapping the menu key
on the upper right corner of touch screen, the screen
will appear the operation setting interface as follows,
【Remark】: The main screen soft key functions
as the machine menu
9
In the main interface, you can touch the icon to open
the APPs
In different browser(file, music, video, pictures), You
shift and drag the scroll bar, so that the file list can up or
down to roll.
4. Equipment basic set
Setting: Click setting icons , enter setting int
erface
10
Altri manuali ProScan Tavoletta
ProScan
ProScan PLT 1044 Manuale utente
ProScan
ProScan PLT7035-B Manuale utente
ProScan
ProScan PLT7033D Manuale utente
ProScan
ProScan PLT9602G Manuale utente
ProScan
ProScan PLT1077G Manuale utente
ProScan
ProScan PLT8990-K Manuale utente
ProScan
ProScan PLT7045K Manuale utente
ProScan
ProScan PLT7223GK4-B Manuale utente
ProScan
ProScan PLT4311-PL Manuale utente
ProScan
ProScan PLT4315 Manuale utente
ProScan
ProScan PLT7044K Manuale utente
ProScan
ProScan HNC050150U Manuale utente
ProScan
ProScan PLT7100G Manuale utente
ProScan
ProScan ELITE PELTDV1029 Manuale utente
ProScan
ProScan PLT7044K-C Manuale utente
ProScan
ProScan PLT7035-PL Manuale utente
ProScan
ProScan PLT8031 Manuale utente
ProScan
ProScan PLT8088 Manuale utente
ProScan
ProScan PLT1065G(K-512-8GB) Manuale utente
ProScan
ProScan PLT7035D Manuale utente
