Prostat OEM Series Manuale utente
User Manual
Commercial Smart Wi-Fi Thermostat
PSP4272C Up to 4-heat / 2-cool with Humidity Control
OPTIONAL Wi-Fi and Local API with module
Read all instructions before proceeding.
Store this manual for future reference
© Copyright 2021 All Rights Reserved. Made in China
PSP4272C User Manual.indd 1PSP4272C User Manual.indd 1 6/9/21 11:05 AM6/9/21 11:05 AM
2
User Manual
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for an intentional radiator, pursuant to Part 15, subpart C of the FCC
rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference in radio communications. However, there is no guarantee that the interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that of the receiver.
• Consult the dealer or an experienced radio or TV technician for help.
Notice: Only peripherals complying with FCC limits may be attached to this equipment. Operation with noncompliant peripherals or
peripherals not recommended by ProStat+™, is likely to result in interference to radio and TV reception. Changes or modifications to the
product, not expressly approved by ProStat+could void the user’s authority to operate the equipment.
FCC - INDOOR Mobile Radio Information:
To comply with FCC/IC RF exposure limits for general population / uncontrolled exposure, the antenna(s) used for this transmitter must be
installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with
any other antenna or transmitter.
This Device complies with Industry Canada License-exempt RSS standard(s). Operation is subject to the following two conditions: 1) this
device may not cause interference, and 2) this device must accept any interference, including interference that may cause undesired
operation of the device.
Follow the Installation Instructions before proceeding. Set the thermostat
mode to “OFF” prior to changing settings in setup or restoring Factory
Defaults.
CAUTIO
N
PSP4272C User Manual.indd 2PSP4272C User Manual.indd 2 6/9/21 11:05 AM6/9/21 11:05 AM
3User Manual
This thermostat has the ability to receive updates to its firmware. Periodically firmware updates are released by the manufacturer to add
features and/or performance enhancements. This manual was produced reflecting the most current firmware/feature set at the time
of publication, firmware rev. 1.0. Firmware releases after rev. 1.0 may not be adequately depicted in this manual. Please refer to the
appropriate website or contact your place of purchase to learn about changes to the thermostat after firmware release 1.0.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or
lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the
antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than
that necessary for successful communication.
Cet appareil est conforme avec Industrie Canada, exempts de licence standard RSS(s). Son fonctionnement est soumis aux deux conditions
suivantes: 1) ce dispositif ne doit pas causer d’interférences, et 2) ce dispositif doit accepter toute interférence, y compris les interférences
qui peuvent causer un mauvais fonctionnement de l’appareil.
En vertu des règlements d’Industrie Canada, cet émetteur de radio ne peut fonctionner en utilisant une antenne d’un type et maximale
(ou moins) Gain approuvé pour l’émetteur par Industrie Canada. Pour réduire les interférences radio potentielles aux autres utilisateurs, le
type d’antenne et son gain doivent être choisis afin que la puissance isotrope rayonnée équivalente (PIRE) ne est pas plus de ce qui est
nécessaire pour une communication réussie.
We, ProStat+, declare under our sole responsibility that the device to which this declaration relates: Complies with Part 15 of the FCC
Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Innovation, Science and Economic Development Canada
ICES-003 Compliance Label: CAN ICES-3 (B)/NM8-3(B)
PSP4272C User Manual.indd 3PSP4272C User Manual.indd 3 6/9/21 11:05 AM6/9/21 11:05 AM
4
User Manual
Features .......................................................................5
Terms ...........................................................................6
1 About Your Thermostat
Front Panel ...................................................................7
Display .........................................................................9
2 Basic Operation
Setting the Clock and Day...........................................12
Heat or Cool Mode ......................................................12
Selecting your Desired Temperature............................13
Auto-Changeover Mode ..............................................13
Using the Override Button ...........................................13
Viewing the Temperature Sensors...............................14
Viewing the Indoor Humidity Sensor............................14
3 Setup Step Table...................................................15
How to Change Settings in the Setup Screens.............18
Programming a Daily Schedule ...................................19
Backlight ....................................................................21
4 Advanced Features & Operation
Emergency Heat .........................................................21
Wi-Fi Module .............................................................22
Factory Defaults..........................................................23
Follow Installation Instructions carefully. Disconnect Power to the Heater/Air Conditioner
before removing the old thermostat and installing the new thermostat.
CAUTION
IMPORTANT
Contents
PSP4272C User Manual.indd 4PSP4272C User Manual.indd 4 6/9/21 11:05 AM6/9/21 11:05 AM
5User Manual
3 Setup Step Table...................................................15
How to Change Settings in the Setup Screens.............18
Programming a Daily Schedule ...................................19
Backlight ....................................................................21
4 Advanced Features & Operation
Emergency Heat .........................................................21
Wi-Fi Module .............................................................22
Factory Defaults..........................................................23
• Choose 7-Day, 5/1/1 day or 1-Day Programming
• 365-Day Holiday Programming (when connected
to ProStat+ Web Portal)
• Built in light sensor for light activation option
• Smart recovery auto-adjusts Occ 1 start time
• Preoccupancy Fan Purge
• Random Start ensures staggered equip. starts
• Energy Watch tracks heating, cooling, and
override run times
• Adjustable Timers & Deadbands Between Stages
Congratulations and thank you for purchasing your new ProStat+Smart Wi-Fi thermostat.
This guide is intended to help you install and setup the basic features of your thermostat.
Features
• Controls Humidification, Dehumidification
& Reheat
• AUX output for Ventilation Control or
IECC2018 regs
• Dry Contact for FDD alerts, condensate
alarm, etc.
• Control to, or Monitor a 2nd Remote Sensor,
supply air or computer room, etc.
• Setpoint Limiting
• Choice of English, Spanish or French For
Scrolling Display
• CA Title 24 Compliant
• OEM-Branded Equipment Badges Included
PSP4272C User Manual.indd 5PSP4272C User Manual.indd 5 6/9/21 11:05 AM6/9/21 11:05 AM
6
User Manual
Terms
Auto-Changeover: A mode in which the thermostat will turn on the heating or cooling based on room
temperature demand.
Cool Setpoint: The warmest temperature that the space should rise to before cooling is turned on (without
regard to deadband).
Deadband: The number of degrees the thermostat will wait, once a setpoint has been reached, before energizing
heating or cooling.
Dehumidify: To reduce the amount of moisture in the air.
Differential: The forced temperature difference between the heat setpoint and the cool setpoint.
Heat Setpoint: The coolest temperature that the space should drop to before heating is turned on
(without regard to deadband).
Humidify: To increase the amount of moisture in the air.
Icon: The word or symbol that appears on the thermostat display.
Mode: The current operating condition of the thermostat (i.e. Off, Heat, Cool, Auto, Program On).
Override: During programmed unoccupied periods, pressing the Override button will force the thermostat into
occupied settings. During programmed occupied periods, pressing the Override button will force the thermostat into
unoccpied settings.
Programmable Thermostat: A thermostat that has the capability of running Time Period Programming.
Reheat: Running the cooling and 2nd stage strip heaters at the same time in order to dehumidify the air without
significantly cooling down the room temperature.
Temperature Swing: Same as Deadband.
Time Period Programming: A program that allows the thermostat to automatically adjust the heat setpoint
and/or the cool setpoint based on the time of the day.
PSP4272C User Manual.indd 6PSP4272C User Manual.indd 6 6/9/21 11:05 AM6/9/21 11:05 AM
7User Manual
1Ambient Light Sensor
2Backlit, Scrolling LCD Display
3OVERRIDE Button
4Warmer & Cooler Buttons
5Heat or Cool Indicator
Heat = Red, Cool = Green
6Setup Buttons behind door
1 About Your Thermostat
Table for button presses
that are required for
entering various menus
1
2
3
45 6
Front Display
TO ENTER MENUS BUTTON PRESS
Setup Steps Press SETUP button
Time Schedule Press SET CLOCK button
Emergency Heat Press EMERGCY HEAT button
Lockout Buttons MODE, Up & Down for 2 seconds
Calibration Press SETUP for 10 seconds
Wireless Setup Press ACCESSRY SETUP button
PSP4272C User Manual.indd 7PSP4272C User Manual.indd 7 6/9/21 11:05 AM6/9/21 11:05 AM
8
User Manual
Button Callouts Inside Doors
PSP4272C User Manual.indd 8PSP4272C User Manual.indd 8 6/9/21 11:05 AM6/9/21 11:05 AM
9User Manual
2
1
6
4
3
3
5
Display
Features
3RD 4TH
1 The scrolling display will be used to help you easily navigate the setup screens in the thermostat.
2 Clock with Day of the Week
Indicates the current time and day. This clock is also used to program the time period schedules.
3 Mode Indicators Selects the operational mode of the equipment.
HEAT - Indicates the heating mode.
COOL - Indicates the air conditioning mode.
HEAT & COOL - Indicates the system will automatically change-over between heat and cool modes as
the temperature varies.
Neither Heat or Cool - Indicates heating and cooling is turned off.
4 Program ON icon
Indicates that Time Period Programming is running or is enabled to be set.
5Room Temperature Display
Indicates the current room temperature and displays the outdoor temperature when selected.
6 Outdoor icon
Indicates the temperature displayed is from the optional outdoor sensor or the ProStat+Web Portal.
PSP4272C User Manual.indd 9PSP4272C User Manual.indd 9 6/9/21 11:05 AM6/9/21 11:05 AM
10
User Manual
3RD 4TH
7Desired Set Temperature
Indicates desired room temperature(s). Also displays the highest and lowest temperatures
for the day.
8 Wi-Fi icons
One dot indicates the thermostat recognizes the wireless module. The “full” icon indicates the
thermostat is currently connected to the Local access point, via the optional Wi-Fi Module.
9 Setup Step icon
Indicates the step number when the thermostat is in the setup mode.
10 2nd, 3rd and 4th Stage icons
Indicates what stage of cooling or heating is currently energized.
11 icon
Indicates the keypad has been locked.
7
7
8
10
10 11
9
Display
Features
PSP4272C User Manual.indd 10PSP4272C User Manual.indd 10 6/9/21 11:05 AM6/9/21 11:05 AM
Altri manuali per OEM Series
2
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Prostat Termostato
Prostat
Prostat PRS6390 Manuale utente
Prostat
Prostat PRS4110 Manuale utente
Prostat
Prostat PRS3110 Manuale utente
Prostat
Prostat PRS6110 Manuale utente
Prostat
Prostat PRS6420 Guida utente
Prostat
Prostat PRS6320 Guida utente
Prostat
Prostat OEM Series Guida utente
Prostat
Prostat OEM PSP4271C Manuale utente
Prostat
Prostat OEM Series Manuale di istruzioni
Prostat
Prostat OEM PSP1100 Manuale utente
