Proxy Mobile Reader Pro Manuale utente
`
User Manual and Installation Guide
Proxy Mobile
Reader Pro
www.proxy.com | [email protected]
Last updated: February 10, 2020
Table of Contents
Introduction 4
Reader 4
Functionality 4
Mobile Reader Pro Wallbox Main Housing 5
Mobile Reader Pro Wallbox Wall Plate 5
Mobile Reader Pro Mullion Main Housing 6
Mobile Reader Pro Mullion Wall Plate 6
Product Specifications 7
RF Exposure Information 7
Installation Details 8
Parts List 8
Recommended Tools 8
Recommended Infrastructure 8
Wiring Information 9
Cable Color codes for Pig Tail Reader 9
Mounting the Mobile Reader Pro 10
Location of mounting holes on the wall (Wallbox) 10
Location of mounting holes on the wall (Mullion) 11
Reader Installation Steps 11
Wiring Diagrams 12
Wiring Recommendations 13
Power Up and Testing 13
Certifications 14
FCC 14
IC 15
CE 16
UL294 17
UL 294 Access Control Performance Levels 17
Install Troubleshooting 18
Warranty 19
| 3 User Manual and Installation Guide: Proxy Mobile Reader Pro
This document may have been updated since printing — for the latest, please visit https://proxy.com/s/pro-install
Introduction
This document details the Proxy Mobile Reader Pro and its basic operational and installation
procedures. It covers the details of the Wallbox and Mullion form-factor readers.
Model(s):
●Proxy Mobile Reader Pro Wallbox (White / Black) [PRWW / PRWK]
●Proxy Mobile Reader Pro Mullion (White / Black) [PRMW / PRMK]
Version(s):
●1.0, 1.2
Reader
Functionality
Mobile Reader Pro is a physical access control wireless mobile credential and smart card reader that
can read HF / LF contactless credentials conforming to the following standards: ISO 14443 A & B as
well as wireless credentials over Bluetooth Low Energy (BLE). The reader can interface with an access
control system equipped with a Wiegand or RS485 serial interface. The reader consists of the following
main parts.
| 4 User Manual and Installation Guide: Proxy Mobile Reader Pro
This document may have been updated since printing — for the latest, please visit https://proxy.com/s/pro-install
Mobile Reader Pro Wallbox Main Housing
Mobile Reader Pro Wallbox Wall Plate
Dimension in millimeters (mm) & inches (in)
| 5 User Manual and Installation Guide: Proxy Mobile Reader Pro
This document may have been updated since printing — for the latest, please visit https://proxy.com/s/pro-install
Mobile Reader Pro Mullion Main Housing
Mobile Reader Pro Mullion Wall Plate
Dimension in millimeters (mm) & inches (in)
| 6 User Manual and Installation Guide: Proxy Mobile Reader Pro
This document may have been updated since printing — for the latest, please visit https://proxy.com/s/pro-install
Product Specifications
Model Name: Mobile Reader Pro
Device Type: RFID reader, 13.56MHz (HF) / 125 KHz (LF) /
Mobile Credential: Bluetooth Low Energy (BLE)
Physical Access control Reader (accessory equipment)
Type of Equipment: Sealed Reader. Suitable for Indoor and Outdoor use.
Interface Type: Pigtail Cable (11 Core + Drain)
Input Voltage: 6V - 16V DC (12V recommended)
Current Draw (WiFi Off): 250 mA @ 12V
Max Current Draw (WiFI On): 500 mA @ 12V
Power Consumption: 6W (Max)
Communication Protocol: Wiegand, RS485 (2wire - Half Duplex), Bluetooth Low Energy,
WiFi IEEE 802.11b/g/n**
Credential Type: 125kHz proximity cards:
- HID® Proximity, Indala®, CasiRusco®, AWID, Farpointe®, Others
13.56MHz smart cards:
- uTrust, PIV, PIV-I, CAC, TWIC,
- MIFARE Classic, DESFire EV1, PLAID [AS 5185-2010],
- ISO15693 UID, ISO14443A/B UID,
- HID® iClass Card Serial Number (CSN)
Bluetooth Low Energy:
Any bit format (standard or custom) up to 120 bits
Transmission Technology: Wiegand
Operating Temperature: -35° to 66°C (-31° to 149°F)
Operating Humidity: 5 to 95% relative humidity (non-condensing)
** Communication via Wiegand was evaluated by UL and serves as the interface between the reader
and panel. Communication via RS485 was not evaluated by UL. WiFi IEEE802.11b/g/n communications
are used for non-critical operations (OTA, backhaul, etc.).
RF Exposure Information
This device has been tested and meets applicable limits for Radio Frequency (RF) exposure.
| 7 User Manual and Installation Guide: Proxy Mobile Reader Pro
This document may have been updated since printing — for the latest, please visit https://proxy.com/s/pro-install
This equipment should be installed and operated with a minimum distance of 20 cm between the
radiator & your body.
Installation Details
Wiring methods shall be in accordance with the National Electrical Code (ANSI/NFPA70), local codes,
and the authorities having jurisdiction.
Parts List
●Mobile Reader Pro – x1
●Security Screw – #6 - 32 x 3/8” (Tamper Resistant) – x1
●Mounting Screws – #6-32 x 1” (Phillips) – x2
●Nylon anchor plugs – #6 Size x 1” – x2
Recommended Tools
●Wire Stripper(s) (18-24 AWG)
●Screwdrivers
●Tamper resistant torx bit (TR10)
●Wire connecters (dry/wet)
●Electrical Tape
Recommended Infrastructure
●All cabling and wiring shall be UL Listed and/or UL Recognized.
●All readers shall be powered by UL listed power-limited power supply, or power-limited output
from UL listed control panel.
●There shall be no connections made to the RS-485 interface (RS485+ and RS485-) for UL
installations.
●Refer to Wiring Recommendations for guidance on wire type and length
●Power Supply (Altronix Maximal or equivalent 12V DC Output)
●Standby Power is not provided by the Card Readers. The Standby Power Level is dependent on
the external power source connected to the Card Reader.
●For RS485 use 24 AWG twisted pair cable with a shunt capacitance of 16 pF per foot and
100-ohm characteristic impedance (option: Category 5 shielded twisted pair (STP)).
| 8 User Manual and Installation Guide: Proxy Mobile Reader Pro
This document may have been updated since printing — for the latest, please visit https://proxy.com/s/pro-install
Wiring Information
Cable Color codes for Pig Tail Reader
Name
Colors
Colors
+VDC
Red
Ground
Black with White Stripe
__________________
Wiegand Data 0
Green
Wiegand Data 1
White
Green LED
Orange
Buzzer
Yellow
Hold
Blue
Red LED
Brown
RS485 -
Grey
RS485 +
Pink
Tamper Output
Violet
Shield Ground
Black / Drain
** For Wiring diagrams and termination points please see your control panel user manual.
Installations will differ between access control panel manufacturers.
Caution:
During wiring, make sure that the +VDC lines do not make contact with any other cables, as it might
affect reader functionality/ cause damage to the reader.
| 9 User Manual and Installation Guide: Proxy Mobile Reader Pro
This document may have been updated since printing — for the latest, please visit https://proxy.com/s/pro-install
Altri manuali per Mobile Reader Pro
1
Indice
