PS Audio XStream Manuale utente
ATTENTION: Please
read the setup guide
xStream Speaker cable
Congratulations on your purchase of the world’s
most advanced speaker cable.
The PS Audio xStream Speaker cable will provide
an audible enhancement to any type of musical
system.
Some qualities characteristic of the xStream
Speaker cables are:
• Massive OFC (oxygen free copper) conductors
• Multistrand/multigauge design
• Soldered connections
* Interchangeable, gold plated banana and spade
end connectors
• Available in Prelude, Plus, Statement and State-
ment Bi-Wire congurations
Connections
The xStream Speaker cable includes both spade
lugs and banana plugs for connecting to standard
binding posts. The connectors are threaded and
can be removed simply by unscrewing them.
Note: the banana plugs must be gripped by the
base of the plug as the tip spins freely.
While the cables ship with the banana plugs con-
nected, the spade lug connectors tend to provide a
tighter, more secure connection and may provide a
sonic advantage due to their greater contact area.
The Bi-Wire cable provides isolated paths for
the high frequency and low frequency compo-
nents of the signal. It can provide a superior
transmission by optimizing the type of cable
each of the frequencies travel along.
The xStream speaker cables are not direc-
tional. They can be connected in either direc-
tion with no effect on the sonic performance.
The xStream Bi-Wire cable is only capable of
being connected in one direction due to the
different number of conductors on each end.
Setup Guide
The xStream speaker cables are stiff and heavy.
Position them as best you can before attaching
the banana or spade connectors to amplier and
speakers.
Pre-bending the cables before installation can help
them t in tricky locations. Ensure that pre-bending
is done before the cables are connected to either
the amplier or speakers.
Ensure that the amplier and the speaker (if ap-
plicable) is powered off before making or changing
any speaker connections. Connect the cable to the
speaker end rst, to avoid the possibility of shorting
out the amplier.
Due to the weight of the cables it may be necessary
to support them. Use the included Velcro straps to
provide strain relief if necessary
Always connect the positive (+) terminal on the am-
plier to the positive (+) terminal on the speaker.
Always connect the negative (-) terminal on the am-
plier to the negative (-) terminal on the speaker.
Bi-Wire setup
The Bi-Wire cable has two wires on the input (am-
plier side), and four wires on the output (speaker
side). The output wiring is as follows:
Blue = High - White = High +
Black = Low - Red = Low +
Warning
Do not use the xStream cable if it is faulty or
frayed.
Do not use the xStream cable in conjunction with
faulty or frayed cable.
Use only for the amplier-speaker connection
Do not use the xStream cable near or in a water
reservoir.
Intended for indoor use only.
Not intended for in-wall use.
Any modication to the cable will void the remain-
der of the manufacturers warranty.
Specications
Statement Bi-Wire:
• Low frequency section
- 6 Gauge multistrand conductors
- Supplementary solid core conductors
• High frequency section
- Solid core silver plated OFC conductors
• Spade and Banana connectors included
• Cable diameter - 30mm x 30mm
Statement:
• 6 Gauge multistrand & multigauge design
• Spade and Banana connectors included
• Cable diameter - 17mm x 25mm
Plus:
• 8 Gauge multistrand & multigauge design
• Spade and Banana connectors included
• Cable diameter - 17mm x 25mm
Prelude:
• 10 Gauge multistrand design
• Spade and Banana connectors included
• Cable diameter - 17mm x 25mm
Materials:
• Oxygen free copper conductors
• Gold plated connectors (10-32 thread)
Lengths:
1m, 2m, 2.5m, 3m, 4m, 5m, 7m
Warranty and Service Information
Inside the U.S. and Canada
PS Audio’s warranty is 3 years parts and labor,
from the date of original purchase. This means
that we warranty the product itself regardless of
ownership, new or used.
Outside the U.S. and Canada
PS Audio has authorized distribution in many
countries of the world. In each country, the
authorized importing retailer or distributor has
accepted the responsibility for warranty of products
sold by that retailer or distributor. Warranty service
should normally be obtained from the importing
retailer or distributor from whom you purchased the
product. In the unlikely event of service required
beyond the capability of the importer, PS Audio will
fulfill the conditions of the warranty. Such product
must be returned at the owner’s expense to the
PS Audio factory. Contact your PS Audio distributor
or the PS Audio customer service department for
more information.
Service issues
Should your unit ever require service or if you have
any technical questions about the xStream cable,
you must either contact your dealer (PS Audio if
purchased direct) or your PS Audio distributor. No
equipment will be received at our service facilities
without an attached RA number.
If purchased through an authorized PS Audio
dealer or distributor, the RA number must be
obtained by the dealer or distributor. If the
product was purchased from PS Audio direct,
this can easily be obtained by calling PS Audio
at 720-406-8946 or by contacting us via E-mail at
PS Audio International, Inc.
Boulder, CO • USA
www.psaudio.com
Ph: 720-406-8946
Fax: 720-406-8967
Altri manuali per XStream
1
Indice
Altri manuali PS Audio Cavi e connettori
