STEP 6 NETWORK SETUP
a. Confirm the “DHCP” switch
is turned On (blue)
b. Confirm “Obtain DNS
Automatically” is On (blue)
c. Click “Next” to continue.
STEP 7 DATE & TIME
a. Confirm “Enable NTP” is On (blue). This allows automatic time
synchronisation via the Internet.
b. Click on “Time Zone” tab. Then click the downward arrow to
select your time zone.
c. Click “Next” when done.
STEP 8 CAMERAS
a. By now, all the cameras
may already be visible in the
background LiveView screen.
b. Otherwise, click “Start Search”
to look for available cameras.
c. When all cameras are listed,
click ”Next” to continue.
Tip: The default camera
activation password
(“admin”) is revealed
by clicking the nearby
“eye”-icon.
STEP 9 INITIALISE HARD DRIVE
a. Click the checkbox in leftmost column to select Hard Drive to
format.
b. Click “Format” to initialise Hard Drive.
c. Click “OK” to confirm.
Warning: This action will wipe all previously stored content in
the Hard Drive.
d. Click “OK” to continue.
STEP 10 DISPLAY RESOLUTION
a. Confirm the display
resolution as default
1920 x 1080 pixels.
Warning: Incompatible
display resolutions will cause
the display to blank out.
b. Click ‘Finish’ to exit
setup Wizard.
======================
Congratulations! You have
successfully setup of your
new IntelLink NVR.
Produced by PSA Products (www.psaproducts.com.au). Version 1.0 Feb 2022
17 Millicent Street, Burwood, VIC 3125 Australia
Tel: 1300 772 776 Fax: (03) 9888 9993
IntelLink NVR QUICK SETUP GUIDE
(for 4, 8 & 16-channel NVR)
