2 3
1. Technical Specifications 4
2. Packing Contents 5
3. Name and Functions of Each Part 6
3.1 Front and Rear Part 6
4. Connection Diagram 8
4.1 System Layout 8
4.2 Wiring Diagram 9
5. Installation 10
6. Operation Description 12
6.1 Main Page 12
7. Quick setup 14
71 Enter setup page 14
7.2 Set Encoder and Unit ID 14
7.3 Set Unlock Password 15
7.4 Wi-Fi Settings Only for PANAIP7MW monitor 16
8. User Manual 17
Please follow these instructions to prevent any personal danger or property loss.
Warning: To avoid death or serious injury
Do not disassemble, install, or repair this product on your own accord
Do not place the product near a hot or humid place
Do not forcibly bend the cord or put a heavy object on the product
Do not use water, thinner or a detergent for removing oil products when
cleaning the exterior
Do not connect to other products while in use
Make sure to clean with a dry cloth to prevent any breakdown or electric
shock
If the product emits a peculiar noise, odour or smoke, immediately
disconnect the power, and then contact PSA Products.
Do not insert the power plug into a 240VAC mains socket with a wet hand
Caution: To avoid personal injury or property loss
Ensure that dust or foreign substances do not collect on the product
Ensure foreign substances do not enter the product
Avoid direct sunlight or heat upon the device
Install the product on a flat & stable location
Unplug the product from AC Mains power if it would not be used for a long time
Do not unplug the micro SD card while recording, as this may cause loss of data
TABLE OF CONTENTS WARNING AND CAUTION
