PSI HMDE Series Manuale utente
TFT LCD MONITOR
USER MANUAL
HMDE with SDI Series Models
L104SDI – 10.4”
L121SDI – 12.1”
L152SDI – 15.0”
L156SDI – 15.6”
L172SDI – 17.0”
L185SDI – 18.5”
L192SDI – 19.0”
L215SDI – 21.5”
L240SDI – 24.0”
L270SDI – 27.0”
L320SDI – 32.0”
L420SDI – 42.0”
L460SDI – 46.0”
2
Table Of Contents
Table of contents/ Warning…………………………………………………………...…..…2
Precautions …………………………………………………………………………...............3
About this user manual / Items included in the delivery ……………………….…..….….4
1. IR-remote control ………………………………………………………………..….……...5
2. LCD monitor mounting ………………………………………………………….…..…….7
3. Monitor controls …………………………………………………………………..…..……9
4. Connections .………………………………………………………………………..…....10
5. Monitor settings via OSD menu ……………………………………………………......12
5.1 Picture ………………………………………………………………………………..….12
5.2 Sound ……………………………………………………………………………….…...12
5.3 OSD Setup ……………………………………………………………………………....13
5.4 Advance ………………………………………………………………………………….13
5.5 PIP………………………………………………………………………………….….….13
5.6 PC ………………………………………………………………………………….……..14
6. Special features ……………………………………………………………………..……15
7. Technical specifications …………………………………………………………….…...16
Warning:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT
TO RAIN OR MOISTURE.
DO NOT INSERT ANY METALLIC OBJECT THROUGH VENTILATION GRILLS.
Caution:
Explanation of Graphical Symbols
Danger: This symbol is intended to alert the user to the
presence of un-insulated
"dangerous voltage" within the product’s enclosure that
may be of sufficient
magnitude to constitute a risk of electric shock to a person.
This symbol is intended to alert the user to the
presence of important
operating and maintenance (servicing) instructions in the
literature accompanying
the appliance.
3
Precautions
Safety--------------------------------------- Installation---------------------------------------
Should any liquid or solid object fall into the
cabinet, unplug the unit and have it checked
by the qualified personnel before operating it
any further.
Unplug the unit from the wall outlet if it is not
going to be used for several days or more.
To disconnect the cord, pull it out by the plug.
Never pull the cord itself.
Allow adequate air circulation to prevent
internal heat built-up. Do not place the unit on
surfaces(rugs, blankets, etc.) or near materials
(curtains, draperies) that may block the
ventilation holes.
Safety Precautions
Federal Communications Commission (FCC) Statement
This Equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that changes or modifications not expressly approved
by that party responsible for compliance could void your authority to operate the equipment.
Do not install the unit in an extremely hot or
humid place or in a place subject to excessive
dust or mechanical vibration.
The unit is not designed to be waterproof.
Exposure to rain or water may damage the unit.
Cleaning------------------------------------
Clean the unit with a slightly damp soft cloth.
Use a mild household detergent. Never use strong
solvents such as thinner or benzene as they might
damage the finish of the unit.
Retain the original carton and packing materials
for safe transport of this unit in the future.
4
About this user manual
This manual aims at assisting the user on how to operate the monitors described in this
manual.
This manual is subject to rigid quality control. However, no guarantee can be given that
mistakes are not present. We reserve the right to make changes to the manual without prior
notice.
Before operating the appliance, please read this manual carefully and retain it for further
reference. Verify that all appliance items are included in the delivery. Should items be
missing, do not operate the appliance and contact your local dealer.
Never attempt to repair the appliance yourself. This should only be done by qualified service
personnel.
Improper handling of the appliance will invalidate the warranty.
Items included in the delivery
1 x LCD monitor
1 x Power supply unit 12 V DC [Except for the 32”/42”/46”]
1 x Power cord
1 x VGA cable - Optional
1 x Audio cable - Optional
1 x IR remote control
1 x User manual
This device complies with Part 15 FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received including interference
that may cause undesired
5
1. IR remote control
(1). Power:
Press this button to turn the monitor on/off.
(2). Zoom:
Press this button to toggle between the
different picture formats:
Full/Zoom/Subtitle/Regular/Panorama
(3). Mute:
Press this button to disable the sound.
Press this button again to turn the sound on again.
(4). Freeze:
Press this button to freeze the picture .
Press this button again to
disable the freeze picture and to re-establish
the normal picture.
(5). PC/HD, AV1/AV2, SV:
You can select the appropriate signal
source directly (PC = VGA/DVI).
(6). Item:
Hot key for OSD adjustments of volume,
contrast, brightness, hue, saturation, sharpness,
and Red Green Blue .
(7). Source:
To switch the video inputs (or sub picture source in pip mode),
please use the IR remote control included in the delivery
This button is also used as „Enter“ and „Select“ function in the OSD menu.
and to confirm your selected settings in the OSD menu.
(8). OK / Menu:
Press this button to call-up the OSD menu.
This button is also used as “Exit“.
Note: The menu button is also used to return to the previous menu.
(9). Select ▲/▼:
Directional buttons up/down.
(10). Display:
Press this button to call-up screen information such as resolution, signal source, etc.
(11). Picture:
Press this button to toggle between the different picture modes:
User, Standard, Movie, Vivid.
(12). PIP:
Press this button to select the picture-in-picture function. Define the size of the sub picture:
Small, Medium, Large, POP Full, POP 4:3, OFF.
(13). Swap:
When in PIP mode, press the swap button to switch the main picture and the sub picture.
The swap button is only active if you have defined a sub-picture before .
(14). Position:
When in PIP mode, press the position button to define the position of the sub-picture:
Either in one of the four screen corners or centred.
(15).ID: Can be control several monitors are installed in the same area.
In ID mode, press ID key, then input setting number(01~99), to unlock “ID” function.
Please press “ID” key again to lock “ID” function.
(16).0~9: For ID setting number used.
6
(17). USB/Right/Left/Catalog:
1:Press ”USB” Key into the JPEG Menu. 2:Press ”MENU” Key into the USB Main menu
3:Press “Left” or “Right” key to select the JPEG/MP3/DRIVE function.
4:Press”Up/Down” Key to select play file.
5:Press”Right” Key to into the file
7
7:Press” PC/HD,AV1/AV2;SV to exit the USB function.
2 LCD monitor Mounting Guide
A. Desktop
Adjust the viewing angle of LCD to fit most comfortable monitoring status.
B. Wall mount
Free your space with wall mount design.
Please follow the fix-hole size in back panel to install the LCD to the wall.
6:Press”Up/Down” Key to select the play file and press Right key to play.
And press ”Menu” to stop play. Then press” Catalog” return the menu.
And press “Menu” into the USB Main menu.
8
C. VESA Bracket
32”
15”/17”/18.5”/19”/21.5”/24”/27”
42”/46”
9
3 Monitor controls
15’/17”/19” Plastic 10.4”/12.1”/15”/15.6”/17”/18.5”/19”/21.5”/22”/24”/27” Aluminium
15”/17”/19” Aluminium
32”/42”/46” Aluminium
10
(1). Power
Turn the monitor on/off.
LED: Green Monitor on
LED: Red Standby mode (no input signal)
(2./3). Adjust Up / Down ▲/▼
Increase or decrease the values in the OSD menu:
Up: Increase the values.
Down: Decrease the values.
(4). Item/Select:
Hot key for OSD adjustments of volume , contrast, brightness, hue, saturation, sharpness,
and Red, Green, Blue.
(5). Menu/Function :
Press this button to call-up the OSD menu.
This button is also used as “Exit“.
(6). Source:
To switch the video inputs, (or sub picture source in pip mode)
This button is also used as „Enter“ and „Select “function in the OSD menu.
and to confirm your selected settings in the OSD menu.
KEY Lock Function:
***Push “Menu” and “Item” after the LED flashes, OSD of screen will show “Key Lock”,
Into key lock mode.
And push again after the LED flashes, OSD of screen will show “Key Unlock “,
Into key unlock mode.
4. Connections
10.4”/12.1”/15”/15.6”/17”/18.5”/19”/21.5”/24”/27”
Questo manuale è adatto per i seguenti modelli
14
Indice
Altri manuali PSI Monitor
