PSsystec SMARTbox IO Agent User Guide
- Jumper must be set on the
Smartbox (during production)
- It creates an event
Enable the extra analogue Input
Note:
- Jumper must be set on the
Smartbox for NTC and different
Jumpersetting for 0..20mA
(during production)
- It creates and measurement
The settings are as follows:
0 – disabled
Define the Logic of DIN Input
Define the send measurement cycle of the
extra analogue Input
Define the Text of the event by DIN
Define the type of the event by DIN
Define the Series of Measurement by AIN
Define the Type of Measurement by AIN
Define the Location update in min
If it is set to 0, then Location is derived
only at startUp.
Define the Min of AIN Value conversion (if
AIN is set to 0…20mA by jumper)
Define the Max of AIN Value conversion
(if AIN is set to 0…20mA by jumper)
If GPS Hardware option is available you
can enable the GPS function by setting 1
and disable by settings 0. Note:
- The locationcycle is also valid for
GPS enabled.
- If GPS=0, the cellular location
Note:
All other configuration settings which you will get with the Snapshot are only for
Information and refers to internal settings.
Note: To set a configuration proceed as follows, put all statements in a new line
e.g.
c8y.DinLogic=1
1. Note that the SMARTbox Mini supports:
- 1 x Digital Input (DIN)
Note the activation of NTC or 0..20mA must be defined during production
