Button & Dial Descriptions
The below descriptions will describe the buttons and dials available on the controller.
1. Speed Control
The Speed Control section allows you to adjust the speed at which you pan, tilt, and zoom the camera.
a. [SPEED] Dial
Twist the Speed Control dial to increase or decrease the control speed.
Press the Speed Control dial in to cycle through zoom, pan, and tilt speeds.
Zoom Speed Range: 1 - 7
Pan Speed Range: 1 - 24
Tilt Speed Range: 1 - 20
2. Exposure Control
The Exposure Control section allows you to adjust the exposure settings of the camera.
a. [IRIS / SHUTTER] Dial
Twist the [IRIS / SHUTTER] dial to adjust the Iris / Shutter value.
Press the [IRIS / SHUTTER] dial in to toggle Iris and Shutter adjustment control.
b. [EXPOSURE MODE] Button
Press the [EXPOSURE MODE] button to cycle through Exposure modes.
Options include: Auto, Manual, Shutter Priority, Iris Priority, & Brightness Priority.
3. White Balance Control
The White Balance Control section allows you to adjust the exposure settings of the camera.
a. [R GAIN / B GAIN] Dial
Twist the [R GAIN / B GAIN] dial to adjust the Red Gain / Blue Gain value.
Press the [R GAIN / B GAIN] dial in to toggle red gain and blue gain adjustment control.
b. [WHITE BALANCE MODE] Button
Press the [WHITE BALANCE MODE] button to cycle through the White Balance Modes.
Options include: Auto, Indoor, Outdoor, One Push, & Manual.
4. Camera OSD Control
The Camera OSD Control section allows you to open and adjust the camera’s on screen display menu.
a. [OSD OPEN / CLOSE] Button
Press the OSD Open / Close button to open and close the on screen display menu.
Move the joystick up, down, left, and right to traverse the camera’s OSD menu.
b. [OSD ENTER] Button
Press the OSD Enter button to select an OSD menu option.
c. [OSD BACK] Button
Press the OSD Back button to go back an OSD menu option.
Refer to the Camera OSD Menu Control section of this guide for more information.
5. Focus Control
The Focus Control section allows you to adjust the focus value of the camera.
a. [NEAR / FAR FOCUS] Dial
Twist the [NEAR / FAR FOCUS] dial to focus the camera’s image on your scene.
Press the [NEAR / FAR FOCUS] dial in to toggle Auto Focus and Manual focus modes.
b. [ONE PUSH AUTO FOCUS] Button
Press the [ONE PUSH AUTO FOCUS] button to automatically focus the image on the scene
while staying in Manual Focus mode.
6. Camera Select
The Camera Select section allows you to select a camera to control.
2
Rev 1.0 9/20
