GENERAL WARNINGS:
- Do not overll the chamber.
- Do not blow or exhale hard into the glass.
This will force water into the base.
- Do not store device with water in the glass,
unless you have the Puffco Travel Glass.
- Strong inhales may cause spillage and
damage to your chamber.
- Do not charge or operate below 32° F or
above 100° F.
- Use only with the provided cable and power
adapter.
- Keep away from moisture and high humidity.
- Store in a cool dark place when not in use.
- During use the chamber is hot (burn hazard).
CLEANING: CHAMBER
1413
1. Remove the cap and
unscrew the chamber from
the base.
2. Light Cleaning:
Use a cotton swab to gently
remove any residue with
90%+ isopropyl alcohol.
3. Deep Cleaning:
Submerge the chamber in
90%+ isopropyl alcohol for
20 minutes. Never use water
(isopropyl alcohol only).
CLEANING: BASE
Preparation: Remove glass and chamber.
Gently clean the gold
contact points using cotton
swabs soaked in isopropyl
alcohol.
Clean the airpath between
the chamber and the glass.
Do not allow water into
the base at any time.
CLEANING: GLASS
Preparation: Carefully remove glass from base.
1. Once removed,
submerge in isopropyl
alcohol.
2. After soaking, remove
from isopropyl alcohol and
rinse clean with water.
(Make sure it’s rinsed
thoroughly prior to use.)
Allow glass to thoroughly dry
before re-attaching to base.
X- Do not re-insert glass
onto base with water in the
bottom chamber.
Do not handle if hot.
Isopropyl alcohol is highly ammable. Let it dry
completely before heating device.
X
